Publications

M. Derkach, D. Gunderov, N. Tabachkova, V. Cheverikin, E. Zolotukhin, S. Prokoshkin, V. Brailovski, V. Sheremetyev. 2024 « Effect of low and high temperature ECAP modes on the microstructure, mechanical properties and functional fatigue behavior of Ti-Zr-Nb alloy for biomedical applications ». Journal of Alloys and Compounds vol. 976
Catherine Desrosiers, Morgan Letenneur, Fabrice Bernier, Nicolas Piche, Benjamin Provencher, Farida Cheriet, François Guibault, Vladimir Brailovski. 2024 « Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ». Journal of Intelligent Manufacturing
Julien Sirois, Marlène Sanjosé, Fabian Sanchez, Vladimir Brailovski. 2024 « Vortex-breakdown efficiency of planar regular grid structures—towards the development of design guidelines ». Fluids vol. 9 , nº 2

Anatolie Timercan, Patrick Terriault, Vladimir Brailovski. 2023 « Axial tension/compression and torsional loading of diamond and gyroid lattice structures for biomedical implants: Simulation and experiment ». Materials and Design vol. 225
Salah Eddine Brika, Vladimir Brailovski. 2023 « A novel apparatus for the simulation of powder spreading procedures in powder-bed-based additive manufacturing processes: Design, calibration, and case study ». Journal of Manufacturing and Materials Processing vol. 7 , nº 4
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2023 « Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ». Canadian Metallurgical Quarterly
Yoann Hériveaux, Sophie Le Cann, Katharina Immel, Elsa Vennat, Vu-Hieu Nguyen, Vladimir Brailovski, Patrick Karasinski, Roger A. Sauer, Guillaume Haïat. 2023 « Debonding of coin-shaped osseointegrated implants: Coupling of experimental and numerical approaches ». Journal of the Mechanical Behavior of Biomedical Materials vol. 141
Marie Llido, Linh-Aurore Le Bras, Vladimir Brailovski, Bernard Séguin, Isabelle Masseau, Yvan Petit, Bertrand Lussier. 2023 « Muscular morphometric study of the canine shoulder for the design of 3D-printed endoprostheses in dogs with osteosarcoma of the proximal humerus: A pilot cadaveric study by MRI ». American Journal of Veterinary Research vol. 84 , nº 6
E. Moquin, M. Letenneur, A. Kreitcberg, J. R. Poulin-Masson, V. Brailovski. 2023 « High cycle fatigue resistance of laser powder bed fused Ti–6Al–4V alloys with processing-induced porosity: Towards damage-tolerant design of printed components ». Materials Science and Engineering: A vol. 884
V. A. Sheremetyev, M. S. Tsaturyants, S. M. Dubinskiy, V. D. Lezin, A. Y. Kreitcberg, A. S. Konopatsky, V. Brailovski. 2023 « Effect of heat treatment on structure and properties of Ti–Zr–Nb Alloy for medical application produced by selective laser melting ». Inorganic Materials: Applied Research vol. 14 , nº 4. p. 987-996
Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2023 « Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ». Powder Technology vol. 420
Anatolie Timercan, Patrick Terriault, Vladimir Brailovski. 2023 « Axial tension/compression and torsional loading of diamond and gyroid lattice structures for biomedical implants: Simulation and experiment ». Materials and Design vol. 225

Patrick Terriault, Anastassis Kozanitis, Patrice Farand. 2022 « Étude comparative des performances académiques d’étudiants exposés à une classe inversée ou traditionnelle : Méthodologie et résultats préliminaires ».
Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Antoine Tahan, Vladimir Brailovski. 2022 « Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ».
Alexandra Baranova, Sergey Dubinskiy, Natalia Tabachkova, Sergey Prokoshkin, Vladimir Brailovski. 2022 « Kinetic features of the isothermal ω-phase formation in superelastic Ti-Nb-Zr alloys ». Materials Letters vol. 325
S. M. Dubinskiy, A. P. Baranova, V. Brailovski. 2022 « Influence of Heating and Cooling on the Isothermal β → ω Transition in Ti–22Nb–6Zr Alloy ». Russian Journal of Non-Ferrous Metals vol. 63 , nº 6. p. 659-663
S. Dubinskiy, G. Markova, A. Baranova, V. Vvedenskiy, I. Minkova, S. Prokoshkin, V. Brailovski. 2022 « A non-typical Elinvar effect on cooling of a beta Ti-Nb-Zr alloy ». Materials Letters vol. 314
Patrick K. Dubois, Alexandre Landry-Blais, Rym Gazzah, Sani Sivi, Vladimir Brailovski, Mathieu Picard. 2022 « Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ». Journal of Turbomachinery vol. 144 , nº 7
Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2022 « Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ». Materials Science and Engineering A vol. 838
Erika Herrera Jimenez, Alena Kreitcberg, Etienne Moquin, Vladimir Brailovski. 2022 « Influence of post-processing conditions on the microstructure, static, and fatigue resistance of laser powder bed fused Ti-6Al-4V components ». Journal of Manufacturing and Materials Processing vol. 6 , nº 4
Alena Kreitcberg, Vladimir Brailovski. 2022 « Effect of Fe and C contents on the microstructure and high-temperature mechanical properties of IN625 alloy processed by laser powder bed fusion ». Materials vol. 15 , nº 19
David Langlais, Vincent Demers, Vladimir Brailovski. 2022 « Rheology of dry powders and metal injection molding feedstocks formulated on their base ». Powder Technology vol. 396 , nº Part A. p. 13-26
Linh-Aurore Le Bras, Anatolie Timercan, Marie Llido, Yvan Petit, Bernard Seguin, Bertrand Lussier, Vladimir Brailovski. 2022 « Personalized endoprostheses for the proximal humerus and scapulohumeral joint in dogs: Biomechanical study of the muscles’ contributions during locomotion ». PLoS ONE vol. 17 , nº 1
K. E. Lukashevich, V. A. Sheremetyev, A. A. Kudryashova, M. A. Derkach, V. A. Andreev, S. P. Galkin, S. D. Prokoshkin, V. Brailovski. 2022 « Effect of forging temperature on the structure, mechanical and functional properties of superelastic Ti-Zr-Nb bar stock for biomedical applications ». Letters on Materials vol. 12 , nº 1. p. 54-58
Konstantin Lukashevich, Vadim Sheremetyev, Alexander Komissarov, Vladimir Cheverikin, Vladimir Andreev, Sergey Prokoshkin, Vladimir Brailovski. 2022 « Effect of cooling and annealing conditions on the microstructure, mechanical and superelastic behavior of a rotary forged Ti–18Zr–15Nb (at. %) bar stock for spinal implants ». Journal of Functional Biomaterials vol. 13 , nº 4
Seyed Mohammad Majdi, Atefeh Ayatollahi Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2022 « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy vol. 65 , nº 2. p. 170-180
Olivier Miclette, Raphaël Côté, Vincent Demers, Vladimir Brailovski. 2022 « Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ». Additive Manufacturing vol. 60 , nº Part A
V. Sheremetyev, S. Dubinskiy, A. Kudryashova, S. Prokoshkin, V. Brailovski. 2022 « In situ XRD study of stress- and cooling-induced martensitic transformations in ultrafine- and nano-grained superelastic Ti-18Zr-14Nb alloy ». Journal of Alloys and Compounds vol. 902
V. Sheremetyev, K. Lukashevich, A. Kreitcberg, A. Kudryashova, M. Tsaturyants, S. Galkin, V. Andreev, S. Prokoshkin, V. Brailovski. 2022 « Optimization of a thermomechanical treatment of superelastic Ti-Zr-Nb alloys for the production of bar stock for orthopedic implants ». Journal of Alloys and Compounds vol. 928
Vadim Sheremetyev, Mikhail Derkach, Anna Churakova, Aleksander Komissarov, Dmitry Gunderov, Georgy Raab, Vladimir Cheverikin, Sergey Prokoshkin, Vladimir Brailovski. 2022 « Microstructure, mechanical and superelastic properties of Ti-Zr-Nb alloy for biomedical application subjected to equal channel angular pressing and annealing ». Metals vol. 12 , nº 10
M. Tsaturyants, V. Sheremetyev, S. Dubinskiy, V. Komarov, K. Polyakova, A. Korotitskiy, S. Prokoshkin, E. Borisov, K. Starikov, D. Kaledina, A. Popovich, V. Brailovski. 2022 « Structure and properties of Ti50.2Ni alloy processed by laser powder bed fusion and subjected to a combination of thermal cycling and heat treatments ». Shape Memory and Superelasticity vol. 8 , nº 1. p. 16-32

Sylvie Doré, Jillian Seniuk Cicek, Marnie V. Jamieson, Patrick Terriault, Christian Belleau, Renato Bezerra Rodrigues. 2021 « What is an engineer: Study description and codeboook development ».
Patrick Terriault, Anastassis Kozanitis, Patrice Farand. 2021 « Use of electrodermal wristbands to measure students' cognitive engagement in the classroom ».
Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Vladimir Brailovski, Antoine Tahan. 2021 « Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ».
Caroline Constant, Vladimir Braïlovski, Éric Wagnac, Yvan Petit, André Desrochers, Sylvain Nichols. 2021 « Biomechanical evaluation of bovine stifles stabilized with an innovative braided superelastic nitinol prosthesis after transection of the cranial cruciate ligament ». Veterinary Surgery vol. 50 , nº 7. p. 1398-1408
Sergey Dubinskiy, Sergey Prokoshkin, Vadim Sheremetyev, Anton Konopatsky, Andrey Korotitskiy, Natalia Tabachkova, Elena Blinova, Alexander Glezer, Vladimir Brailovski. 2021 « The mechanisms of stress-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation ». Journal of Alloys and Compounds vol. 858
P. K. Dubois, A. Landry-Blais, R. Gazzah, S. Sivic, V. Brailovski, M. Picard. 2021 « Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ».
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports vol. 11 , nº 1
Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021 « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals vol. 11 , nº 1
V. Kalinicheva, V. Sheremetyev, M. Letenneur, A. Konopatsky, S. Prokoshkin, V. Brailovski. 2021 « Effect of thermal treatment on the structure and hardness of the laser powder bed-fused Ti-Zr-Nb shape memory alloy ».
A. Konopatsky, V. Sheremetyev, S. Dubinskiy, Y. Zhukova, K. Firestein, D. Golberg, M. Filonov, S. Prokoshkin, V. Brailovski. 2021 « Structure and superelasticity of novel Zr-Rich Ti-ZrNb shape memory alloys ». Shape Memory and Superelasticity vol. 7 , nº 2. p. 304-313
Linh-Aurore Le Bras, Anatolie Timercan, Bertrand Lussier, Bernard Séguin, Yvan Petit, Vladimir Brailovski. 2021 « Novel limb sparing technique using 3D-printed patient-specific endoprostheses for tumors of the proximal humerus ». Affiche présentée lors de la conférence : 4th HI-AM Conference (En ligne, June 01-02, 2021)
J. R. Poulin, A. Kreitcberg, V. Brailovski. 2021 « Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior ». Additive Manufacturing vol. 47
Mykhailo Samoilenko, Greg Lanik, Vladimir Brailovski. 2021 « Towards the determination of machining allowances and surface roughness of 3D-printed parts subjected to abrasive flow machining ». Journal of Manufacturing and Materials Processing vol. 5 , nº 4
V. Sheremetyev, S. Dubinskiy, M. A. Iqbal, K. Lukashevich, S. Prokoshkin, V. Brailovski. 2021 « Effect of dynamic chemical etching on the pore structure, permeability, and mechanical properties of Ti-Nb-Zr scaffolds for medical applications ». Journal of Manufacturing Science and Engineering vol. 143 , nº 5
Atefeh A. Tafti, Vincent Demers, Seyed M. Majdi, Guillem Vachon, Vladimir Brailovski. 2021 « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals vol. 11 , nº 2
Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2021 « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering vol. 143 , nº 3
Anatolie Timercan, Vadim Sheremetyev, Vladimir Brailovski. 2021 « Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis ». Science and Technology of Advanced Materials vol. 22 , nº 1. p. 285-300
William Turnier Trottier, Alena Kreitcberg, Vladimir Brailovski. 2021 « Structure and mechanical properties of laser powder bed-fused and wrought ph13-8mo-type precipitation hardening stainless steels: Comparative study ». Journal of Manufacturing and Materials Processing vol. 5 , nº 3
T. D. Xuan, V. A. Sheremetyev, V. S. Komarov, A. A. Kudryashova, S. P. Galkin, V. A. Andreev, S. D. Prokoshkin, V. Brailovski. 2021 « Comparative study of superelastic Ti–Zr–Nb and commercial VT6 alloy billets by QForm simulation ». Russian Journal of Non-Ferrous Metals vol. 62 , nº 1. p. 39-47

J. R. Poulin, A. Kreitcberg, P. Terriault, V. Brailovski. 2020 « Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ». International Journal of Fatigue vol. 132
Jean-René Poulin, Morgan Letenneur, Patrick Terriault, Vladimir Brailovski. 2020 « Influence of intentionally induced porosity and postprocessing conditions on the mechanical properties of laser powder bed–fused Inconel 625 ».
Vladimir Brailovski, Victoria Kalinicheva, Morgan Letenneur, Konstantin Lukashevich, Vadim Sheremetyev, Sergey Prokoshkin. 2020 « Control of density and grain structure of a laser powder bed-fused superelastic Ti-18Zr-14Nb alloy: Simulation-driven process mapping ». Metals vol. 10 , nº 12
Salah Eddine Brika, Vladimir Brailovski. 2020 « Influence of Powder Particle Morphology on the Static and Fatigue Properties of Laser Powder Bed-Fused Ti-6Al-4V Components ». Journal of Manufacturing and Materials Processing vol. 4 , nº 4
Salah Eddine Brika, Morgan Letenneur, Christopher Alex Dion, Vladimir Brailovski. 2020 « Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy ». Additive Manufacturing vol. 31
Caroline Constant, Sylvain Nichols, Éric Wagnac, Yvan Petit, André Desrochers, Vladimir Braïlovski. 2020 « Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices ». Materialia vol. 9
Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2020 « Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ». Materials vol. 13 , nº 11
A. Kudryashova, V. Sheremetyev, K. Lukashevich, V. Cheverikin, K. Inaekyan, S. Galkin, S. Prokoshkin, V. Brailovski. 2020 « Effect of a combined thermomechanical treatment on the microstructure, texture and superelastic properties of Ti-18Zr-14Nb alloy for orthopedic implants ». Journal of Alloys and Compounds vol. 843. p. 11
Morgan Letenneur, Pete Imbrogno, Amin Molavi-Kakhki, Vladimir Brailovski. 2020 « Laser powder bed fusion with intentionally-seeded porosity for prototyping of powder metallurgy parts ». Journal of Manufacturing and Materials Processing vol. 4 , nº 4
Morgan Letenneur, Alena Kreitcberg, Vladimir Brailovski. 2020 « The average grain size and grain aspect ratio in metal laser powder bed fusion: Modeling and experiment ». Journal of Manufacturing and Materials Processing vol. 4 , nº 1
B. Nijikovsky, V. Brailovski, L. Y. Aguirre Perales, V. Paris. 2020 « Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance ».
Boris Nijikovsky, Lydia Aguirre Perales, Salah Eddine Brika, Vladimir Brailovski. 2020 « Towards reliable optimization of metal powderLubricant mixing for high die filling performance: Exploring a rheology based approach ». Powder Technology vol. 362. p. 168-176
J. R. Poulin, A. Kreitcberg, P. Terriault, V. Brailovski. 2020 « Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ». International Journal of Fatigue vol. 132
Jean-René Poulin, Morgan Letenneur, Patrick Terriault, Vladimir Brailovski. 2020 « Influence of intentionally induced porosity and postprocessing conditions on the mechanical properties of laser powder bed–fused Inconel 625 ».
Bernard Séguin, Chris Pinard, Bertrand Lussier, Deanna Williams, Lynn Griffin, Brendan Podell, Sebastian Mejia, Anatolie Timercan, Yvan Petit, Vladimir Brailovski. 2020 « Limb-sparing in dogs using patient-specific, three-dimensional-printed endoprosthesis for distal radial osteosarcoma: a pilot study ». Veterinary and Comparative Oncology vol. 18 , nº 1. p. 92-104
Vadim Sheremetyev, Mikhail Petrzhik, Yulia Zhukova, Alibek Kazakbiev, Anastasia Arkhipova, Mikhail Moisenovich, Sergey Prokoshkin, Vladimir Brailovski. 2020 « Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials vol. 108 , nº 3. p. 647-662
Xuan Ta Dinh, V. A. Sheremetyev, A. A. Kudryashova, S. P. Galkin, V. A. Andreev, S. D. Prokoshkin, V. Brailovski. 2020 « Influence of the combined radial shear rolling and rotary forging on the deformation mode of the small-diameter rod billet made of titanium alloys ». Russian Journal of Non-Ferrous Metals vol. 61 , nº 3. p. 271-279
Floriane Zongo, Charles Simoneau, Anatolie Timercan, Antoine Tahan, Vladimir Brailovski. 2020 « Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ». International Journal of Advanced Manufacturing Technology vol. 107. p. 1411-1436

Sylvie Doré, Patrick Terriault, Christian Belleau. 2019 « Gathering the voice of the students for accreditation purposes through their definition of “engineer” ».
J.-R. Poulin, A. Kreitcberg, P. Terriault, V. Brailovski. 2019 « Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ». International Journal of Fatigue vol. 127. p. 144-156
Jean-Rene Poulin, Patrick Terriault, Vladimir Brailovski. 2019 « Implementation of the kitagawa-takahashi approach for prediction of fatigue limit of inconel 625 components containing intentionally-seeded defects ». Communication lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019)
Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019)
Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ». Applied Thermal Engineering vol. 158
Patrick Terriault. 2019 « Apprentissage actif fondé sur la classe inversée dans un cours de génie mécanique ».
C. Bouland, V. Urlea, K. Beaubier, M. Samoilenko, V. Brailovski. 2019 « Abrasive flow machining of laser powder bed-fused parts: numerical modeling and experimental validation ». Journal of Materials Processing Technology vol. 273
Eslam Fayed, Mamoun Medraj, Davood Shahriari, Mohammad Jahazi, Vladimir Brailovski. 2019 « Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ».
Yoann Hériveaux, Vu-Hieu Nguyen, Vladimir Brailovski, Cyril Gorny, Guillaume Haiat. 2019 « Reflection of an ultrasonic wave on the bone-implant interface: effect of the roughness parameters ». Journal of the Acoustical Society of America vol. 145 , nº 6. p. 3370-3381
W. Huang, P. Causse, V. Brailovski, H. Hu, F. Trochu. 2019 « Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ». Composites Part A: Applied Science and Manufacturing vol. 124
K. Inaekyan, A. Kreitcberg, S. Turenne, V. Brailovski. 2019 « Microstructure and mechanical properties of laser powder bed-fused IN625 alloy ». Materials Science and Engineering A vol. 768
A. S. Konopatskii, S. M. Dubinskii, Yu S. Zhukova, K. Inaekyan, V. Brailovskii, S. D. Prokoshkin, M. R. Filonov. 2019 « Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties ». Metal Science and Heat Treatment vol. 61. p. 333-339
A. Kreitcberg, V. Sheremetyev, S. Prokoshkin, V. Brailovski. 2019 « Laser powder bed fusion of superelastic Ti-18Zr-14Nb alloy: influence of processing and post-processing conditions on structure, texture, and mechanical properties ».
A. Kreitcberg, V. Sheremetyev, M. Tsaturyants, S. Prokoshkin, V. Brailovski. 2019 « Optimization of post-processing annealing conditions of the laser powder bed-fused Ti–18Zr–14Nb shape memory alloy: structure and functional properties ». Shape Memory and Superelasticity vol. 5 , nº 2. p. 172-181
Alena Kreitcberg, Karine Inaekyan, Sylvain Turenne, Vladimir Brailovski. 2019 « Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 3 , nº 3
Morgan Letenneur, Alena Kreitcberg, Vladimir Brailovski. 2019 « Optimization of laser powder bed fusion processing using a combination of melt pool modeling and design of experiment approaches: Density control ». Journal of Manufacturing and Materials Processing vol. 3 , nº 1
Neda Mohammadian, Sylvain Turenne, Vladimir Brailovski. 2019 « Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte ». Journal of Manufacturing and Materials Processing vol. 3 , nº 4
T. Parent-Simard, A. Landry-Blais, P. K. Dubois, M. Picard, V. Brailovski. 2019 « Effect of surface roughness induced by laser powder bed fusion additive manufacturing in a mini-channel heat exchanger ».
J.-R. Poulin, A. Kreitcberg, P. Terriault, V. Brailovski. 2019 « Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ». International Journal of Fatigue vol. 127. p. 144-156
Jean-Rene Poulin, Patrick Terriault, Vladimir Brailovski. 2019 « Implementation of the kitagawa-takahashi approach for prediction of fatigue limit of inconel 625 components containing intentionally-seeded defects ». Communication lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019)
Sergey Prokoshkin, Sergey Dubinskiy, Vladimir Brailovski. 2019 « Features of a nanosubgrained structure in deformed and annealed Ti–Ni SMA: A brief review ». Shape Memory and Superelasticity vol. 5 , nº 4. p. 336-345
Sergey Prokoshkin, Sergey Dubinskiy, Vladimir Brailovski. 2019 « Features of nanosubgrained structure in deformed and annealed Ti-Ni SMA ».
Sergey Prokoshkin, Sergey Dubinskiy, Andrey Korotitskiy, Anton Konopatsky, Vadim Sheremetyev, Igor Shchetinin, Alexander Glezer, Vladimir Brailovski. 2019 « Nanostructure features and stress-induced transformation mechanisms in extremely fine-grained titanium nickelide ». Journal of Alloys and Compounds vol. 779. p. 667-685
Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019)
Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ». Applied Thermal Engineering vol. 158
V. A. Sheremet'ev, A. A. Kudryashova, Xuan Ta Dinh, S. P. Galkin, S. D. Prokoshkin, V. Brailovskii. 2019 « Advanced technology for preparing bar from medical grade Ti-Zr-Nb superelastic alloy based on combination of radial-shear rolling and rotary forging ». Metallurgist vol. 63 , nº 1-2. p. 51-61
V. Sheremetyev, A. Kudryashova, V. Cheverikin, A. Korotitskiy, S. Galkin, S. Prokoshkin, V. Brailovski. 2019 « Hot radial shear rolling and rotary forging of metastable beta Ti-18Zr-14Nb (at. %) alloy for bone implants: microstructure, texture and functional properties ». Journal of Alloys and Compounds. p. 320-326
V. Sheremetyev, A. Kudryashova, M. Derkach, K. Lukashevich, V. Andreev, S. Galkin, S. Prokoshkin, V. Brailovski. 2019 « The effect of combined thermomechanical treatment on the structure, phases and hardness of a superelastic Ti-Zr-Nb bar stock ».
V. Sheremetyev, A. Kudryashova, S. Galkin, V. Andreev, S. Prokoshkin, V. Brailovski. 2019 « Superelastic Ti-Zr-Nb alloy for spinal rods: technology, microstructure, texture, and functional properties ».
Vadim Sheremetyev, Muhammad Farzik Ijaz, Anastasia Kudryashova, Anton S. Konopatsky, Sergey Prokoshkin, Vladimir Brailovski. 2019 « Characterization of the superelastic and structural characteristics of β-Ti alloys by strain-controlled cycling after thermomechanical processing and subsequent ageing ». Journal of Metastable and Nanocrystalline Materials vol. 31. p. 43-50
A. S. Soldatenko, M. A. Karachevtseva, V. A. Sheremetyev, A. A. Kudryashova, A. Y. Arkhipova, V. A. Andreev, S. D. Prokoshkin, V. Brailovski, M. M. Moisenovich, K. V. Shaitan. 2019 « Features of in vitro interaction of osteoblast-like MG-63 cells with the surface of Ti-Zr-Nb shape memory alloys ». Moscow University Biological Sciences Bulletin vol. 74 , nº 4. p. 250-255
Anatolie Timercan, Vladimir Brailovski, Yvan Petit, Bertrand Lussier, Bernard Seguin. 2019 « Personalized 3D-printed endoprostheses for limb sparing in dogs: modeling and in vitro testing ». Medical Engineering and Physics vol. 71. p. 17-29
Yulia Zhukova, Anastasia Korobkova, Sergey Dubinskiy, Yury Pustov, Anton Konopatsky, Dmitry Podgorny, Mikhail Filonov, Sergey Prokoshkin, Vladimir Brailovski. 2019 « The electrochemical and mechanical behavior of bulk and porous superelastic Ti-Zr-based alloys for biomedical applications ». Materials vol. 12 , nº 15
Floriane Zongo, Antoine Tahan, Vladimir Brailovski. 2019 « Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 3 , nº 2

Bruno Jetté, Vladimir Brailovski, Mathieu Dumas, Charles Simoneau, Patrick Terriault. 2018 « Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ». Journal of the Mechanical Behavior of Biomedical Materials vol. 77. p. 58-72
Bruno Jetté, Vladimir Brailovski, Charles Simoneau, Mathieu Dumas, Patrick Terriault. 2018 « Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ». Journal of the Mechanical Behavior of Biomedical Materials vol. 77. p. 539-550
Hamid Khodaei, Patrick Terriault. 2018 « Experimental validation of shape memory material model implemented in commercial finite element software under multiaxial loading ». Journal of Intelligent Material Systems and Structures vol. 29 , nº 14. p. 2954-2965
J. R. Poulin, V. Brailovski, P. Terriault. 2018 « Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ». International Journal of Fatigue vol. 116. p. 634-647
Hugo Soul, Patrick Terriault, Vladimir Brailovski. 2018 « The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Patrick Terriault, Vladimir Brailovski. 2018 « Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ». Finite Elements in Analysis and Design vol. 138. p. 1-11
A. Aidibe, A. Tahan, V. Brailovski. 2018 « A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ».
Lucien Diotalevi, Yvan Petit, Vladimir Brailovski, Sylvain Nichols, Emma Marchionatti, Éric Wagnac. 2018 « Quasi-static tensile properties of the Cranial Cruciate Ligament (CrCL) in adult cattle: towards the design of a prosthetic CrCL ». Journal of the Mechanical Behavior of Biomedical Materials vol. 79. p. 239-245
M. F. Ijaz, Y. Zhukova, A. Konopatsky, S. Dubinskiy, A. Korobkova, Y. Pustov, V. Brailovski, S. Prokoshkin. 2018 « Effect of Ta addition on the electrochemical behavior and functional fatigue life of metastable Ti-Zr-Nb based alloy for indwelling implant applications ». Journal of Alloys and Compounds vol. 748. p. 51-56
Bruno Jetté, Vladimir Brailovski, Mathieu Dumas, Charles Simoneau, Patrick Terriault. 2018 « Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ». Journal of the Mechanical Behavior of Biomedical Materials vol. 77. p. 58-72
Bruno Jetté, Vladimir Brailovski, Charles Simoneau, Mathieu Dumas, Patrick Terriault. 2018 « Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ». Journal of the Mechanical Behavior of Biomedical Materials vol. 77. p. 539-550
A. Yu Kolobova, E. P. Ryklina, S. D. Prokoshkin, K. E. Inaekyan, V. Brailovskii. 2018 « Study of the evolution of the structure and kinetics of martensitic transformations in a titanium nickelide upon isothermal annealing after hot helical rolling ». Physics of Metals and Metallography vol. 119 , nº 2. p. 134-145
A. Kreitcberg, V. Brailovski, S. Prokoshkin. 2018 « New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization ». Journal of Materials Processing Technology vol. 252. p. 821-829
M. Letenneur, V. Brailovski, M. Moravej, L. Aguirre. 2018 « Porosity evaluation in compacted and sintered parts using the micro-tomography and metallography techniques ».
Neda Mohammadian, Sylvain Turenne, Vladimir Brailovski. 2018 « Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing ». Journal of Materials Processing Technology vol. 252. p. 728-738
Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology vol. 96 , nº 1-4. p. 371-385
J. R. Poulin, V. Brailovski, P. Terriault. 2018 « Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ». International Journal of Fatigue vol. 116. p. 634-647
Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018 « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
V. Sheremetyev, A. Kudryashova, S. Dubinskiy, S. Galkin, S. Prokoshkin, V. Brailovski. 2018 « Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment ». Journal of Alloys and Compounds vol. 737. p. 678-683
Vadim A. Sheremetyev, Anton P. Bonartsev, Sergey M. Dubinskiy, Yulia S. Zhukova, Garina A. Bonartseva, Tatiana K. Makhina, Elizaveta A. Akoulina, Elina V. Ivanova, Maria S. Kotlyarova, Sergey D. Prokoshkin, Vladimir Brailovski, Konstantin V. Shaitan. 2018 « Surface modification of Ti-Nb-Zr foams by Poly(3-Hydroxybutyrate) ».
Hugo Soul, Patrick Terriault, Vladimir Brailovski. 2018 « The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 2 , nº 2
Patrick Terriault, Vladimir Brailovski. 2018 « Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ». Finite Elements in Analysis and Design vol. 138. p. 1-11
F. Trochu, S. Hilal, W. Huang, Y. Sun, P. Causse, V. Brailovski. 2018 « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ».
Floriane Zongo, Antoine Tahan, Ali Aidibe, Vladimir Brailovski. 2018 « Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing vol. 2 , nº 3
Anatolie Timercan, Vladimir Brailovski, Bertrand Lussier, Yvan Petit, Bernard Seguin. 2018-05-08 « 3D Printed Personalized Canine Prostheses ». Substance ÉTS
Anatolie Timercan, Vladimir Brailovski, Bertrand Lussier, Yvan Petit, Bernard Seguin. 2018-05-08 « Prothèses canines personnalisées imprimées en 3D ». Substance ÉTS

Vladimir Brailovski, Patrick Terriault, Charles Simoneau, Mathieu Dumas, Bruno Jetté. 2017 « Development of a biomimetic metallic femoral stem: Methodological approach ».
Mathieu Dumas, Patrick Terriault, Vladimir Brailovski. 2017 « Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ». Materials and Design vol. 121. p. 383-392
Jean-René Poulin, Patrick Terriault, Martine Dubé, Pierre-Luc Vachon. 2017 « Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ». Journal of Intelligent Material Systems and Structures vol. 28 , nº 11. p. 1437-1453
Charles Simoneau, Patrick Terriault, Bruno Jetté, Mathieu Dumas, Vladimir Brailovski. 2017 « Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ». Materials and Design vol. 114. p. 546-556
Patrick Terriault, Vladimir Brailovski. 2017 « Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ». Advances in Materials Science and Engineering vol. 2017
Vladimir Brailovski, Patrick Terriault, Charles Simoneau, Mathieu Dumas, Bruno Jetté. 2017 « Development of a biomimetic metallic femoral stem: Methodological approach ».
Martin Brummund, Vladimir Brailovski, Yvan Petit, Yann Facchinello, Jean-Marc Mac-Thiong. 2017 « Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ». Clinical Biomechanics vol. 43. p. 86-94
Martin Brummund, Vladimir Brailovski, Yvan Petit, Yann Facchinello, Jean-Marc Mac-Thiong. 2017 « Impact of spinal rod stiffness on porcine lumbar biomechanics: Finite element model validation and parametric study ». Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine vol. 231 , nº 12. p. 1071-1080
Mathieu Dumas, Patrick Terriault, Vladimir Brailovski. 2017 « Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ». Materials and Design vol. 121. p. 383-392
M. F. Ijaz, S. Dubinskiy, Y. Zhukova, A. Korobkova, Y. Pustov, V. Brailovski, S. Prokoshkin. 2017 « Novel electrochemical test bench for evaluating the functional fatigue life of biomedical alloys ». The Journal of The Minerals, Metals & Materials Society vol. 69 , nº 8. p. 1334-1339
A. S. Konopatsky, S. M. Dubinskiy, Yu S. Zhukova, V. Sheremetyev, V. Brailovski, S. D. Prokoshkin, M. R. Filonov. 2017 « Ternary Ti-Zr-Nb and quaternary Ti-Zr-Nb-Ta shape memory alloys for biomedical applications: Structural features and cyclic mechanical properties ». Materials Science and Engineering A vol. 702. p. 301-311
A. Konopatsky, V. Brailovski, M. Filonov, S. Dubinskiy, Y. Zhukova, A. Korotitskiy, S. Prokoshkin. 2017 « Manufacturing and characterization of novel Ti-Zr-Based shape memory alloys ». Materials Today: Proceedings vol. 4 , nº 3. p. 4856-4860
A. Kreitcberg, V. Brailovski, V. Sheremetyev, S. Prokoshkin. 2017 « Effect of laser powder bed fusion parameters on the microstructure and texture development in superelastic Ti–18Zr–14Nb Alloy ». Shape Memory and Superelasticity vol. 3 , nº 4. p. 361-372
A. Kreitcberg, V. Brailovski, S. Turenne. 2017 « The build orientation-dependent ductility of IN625 alloy processed by laser powder-bed fusion ».
Alena Kreitcberg, Vladimir Brailovski, Sylvain Turenne. 2017 « Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion ». Materials Science and Engineering A vol. 689. p. 1-10
Alena Kreitcberg, Vladimir Brailovski, Sylvain Turenne. 2017 « Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion ». Materials Science and Engineering A vol. 700. p. 540-553
Alena Kreitcberg, Vladimir Brailovski, Sylvain Turenne, Cyrille Chanal, Victor Urlea. 2017 « Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting : A comparative study ».
Morgan Letenneur, Vladimir Brailovski, Alena Kreitcberg, Vladimir Paserin, Ian Bailon-Poujol. 2017 « Laser powder bed fusion of water-atomized iron-based powders: process optimization ». Journal of Manufacturing and Materials Processing vol. 1 , nº 2
Ahmad Mostafa, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2017 « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals vol. 7 , nº 6
S. Prokoshkin, S. Dubinskiy, V. Brailovski, A. Korotitskiy, A. Konopatsky, V. Sheremetyev, E. Blinova. 2017 « Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation ». Materials Letters vol. 192. p. 111-114
Sergey Prokoshkin, Vladimir Brailovski, Sergey Dubinskiy, Karine Inaekyan, Alena Kreitcberg. 2017 « Peculiarities of nanostructure formation upon post-deformation annealing of Ti-Ni shape memory alloys ». Materials Today: Proceedings vol. 4 , nº 3. p. 4819-4824
V. A. Sheremetyev, S. M. Dubinskiy, M. A. Ikbal, A. A. Korobkova, A. M. Kazakbiev, S. D. Prokoshkin, V. Brailovski. 2017 « Effect of dynamical chemical etching on the porous structure parameters of superelastic medical TiNbZr alloy foam ». Russian Metallurgy (Metally) vol. 2017 , nº 10. p. 789-793
Charles Simoneau, Patrick Terriault, Bruno Jetté, Mathieu Dumas, Vladimir Brailovski. 2017 « Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ». Materials and Design vol. 114. p. 546-556
Patrick Terriault, Vladimir Brailovski. 2017 « Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ». Advances in Materials Science and Engineering vol. 2017
V. Urlea, V. Brailovski. 2017 « Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion ». International Journal of Advanced Manufacturing Technology vol. 92 , nº 9-12. p. 4487-4499
V. Urlea, V. Brailovski. 2017 « Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components ». Journal of Materials Processing Technology vol. 242. p. 1-11
Vincent Pelletier, Yvan Petit, Vladimir Brailovski, Ronald Denis, Anne-Sophie Studer, Éric Wagnac. 2017-11-15 « Imprimer un estomac 3D pour mieux éduquer en chirurgie bariatrique ». Substance ÉTS
Vincent Pelletier, Yvan Petit, Vladimir Brailovski, Ronald Denis, Anne-Sophie Studer, Éric Wagnac. 2017-11-15 « Printing a 3D Stomach Teaching Tool for Bariatric Surgery ». Substance ÉTS

V. Brailovski, P. Terriault. 2016 « Metallic porous materials for orthopedic implants: functional requirements, manufacture, characterization, and modeling ».
Mathieu Dumas, Patrick Terriault, Vladimir Brailovski. 2016 « Modeling and simulation of porous structures for load-bearing implants ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
C. Simoneau, V. Brailovski, P. Terriault. 2016 « Design, manufacture and tensile properties of stochastic porous metallic structures ». Mechanics of Materials vol. 94. p. 26-37
Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2016 « Stochastic porous metallic structures for biomedical application: mesoscale modeling, manufacturing and testing ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
Ali Aidibe, Antoine Tahan, Vladimir Brailovski. 2016 « Metrological investigation of a selective laser melting additive manufacturing system: A case study ». IFAC-PapersOnLine vol. 49 , nº 31. p. 25-29
Xytilis Avoine, Bertrand Lussier, Vladimir Brailovski, Karine Inaekyan, Guy Beauchamp. 2016 « Evaluation of the effect of 4 types of knots on the mechanical properties of 4 types of suture material used in small animal practice ». Canadian Journal of Veterinary Research vol. 80 , nº 2. p. 162-170
V. Brailovski, P. Terriault. 2016 « Metallic porous materials for orthopedic implants: functional requirements, manufacture, characterization, and modeling ».
Vladimir Brailovski, Yann Facchinello, Martin Brummund, Yvan Petit, Jean-Marc Mac-Thiong. 2016 « Ti–Ni rods with variable stiffness for spine stabilization: Manufacture and biomechanical evaluation ». Shape Memory and Superelasticity vol. 2 , nº 1. p. 3-11
L. Diotalevi, Y. Petit, V. Brailovski, S. Nichols, E. Marhionatti, E. Wagnac. 2016 « Conception d'une prothèse innovante pour stabiliser le genou (grasset) bovin adulte suite à une rupture du ligament croisé cranial (LCC) ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016)
Sergey Dubinskiy, Andrey Korotitskiy, Sergey Prokoshkin, Vladimir Brailovski. 2016 « In situ X-ray diffraction study of athermal and isothermal omega-phase crystal lattice in Ti-Nb-based shape memory alloys ». Materials Letters vol. 168. p. 155-157
Mathieu Dumas, Patrick Terriault, Vladimir Brailovski. 2016 « Modeling and simulation of porous structures for load-bearing implants ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
Karine Inaekyan, Vladimir Paserin, Ian Bailon-Poujol, Vladimir Brailovski. 2016 « Binder-jetting additive manufacturing with water atomized iron powders ».
Jerome Lafreniere, Vladimir Brailovski, Anatolie Timercan, Michel Poirier, Éric Wagnac. 2016 « Manufacturability of custom endosteal dental implants by selective laser melting ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
Jerome Lafreniere, Vladimir Brailovski, Anatolie Timercan, Michel Poirier, Éric Wagnac. 2016 « Manufacturability of custom endosteal dental implants by selective laser melting ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
Bertrand Lussier, Vladimir Brailovski, Yvan Petit, Thomas Lecoq, Martin Brummund, Anatolie Timercan, Bernard Séguin. 2016 « Novel limb sparing technique using customized 3D printed patient-specific endoprostheses for tumors of the distal radius ». Affiche présentée lors de la conférence : ACVS Surgery Summit (Seattle, WA, USA, Oct. 05-08, 2016)
S. Prokoshkin, V. Brailovski, S. Dubinskiy, K. Inaekyan, A. Kreitcberg. 2016 « Gradation of nanostructures in cold-rolled and annealed Ti–Ni shape memory alloys ». Shape Memory and Superelasticity vol. 2 , nº 1. p. 12-17
S. Prokoshkin, V. Brailovski, S. Dubinskiy, Y. Zhukova, V. Sheremetyev, A. Konopatsky, K. Inaekyan. 2016 « Manufacturing, structure control, and functional testing of Ti–Nb-Based SMA for medical application ». Shape Memory and Superelasticity vol. 2 , nº 2. p. 130-144
J. Rivard, V. Brailovski, A. Ferlatte, Yvan Petit, J. M. Mac-Thiong. 2016 « New methodology for comparative evaluation of the abrasive properties of orthopedic cables, cut-out reciprocal testing (CORT) ». Experimental techniques vol. 40 , nº 1. p. 35-42
V. Sheremetyev, V. Brailovski, S. Prokoshkin, K. Inaekyan, S. Dubinskiy. 2016 « Functional fatigue behavior of superelastic beta Ti-22Nb-6Zr(at%) alloy for load-bearing biomedical applications ». Materials Science and Engineering: C vol. 58. p. 935-944
C. Simoneau, V. Brailovski, P. Terriault. 2016 « Design, manufacture and tensile properties of stochastic porous metallic structures ». Mechanics of Materials vol. 94. p. 26-37
Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2016 « Stochastic porous metallic structures for biomedical application: mesoscale modeling, manufacturing and testing ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016)
Jean-René Poulin, David Barry, Vladimir Brailovski. 2016-10-14 « Additive Manufacturing of Argon 18’s Olympic Race Bike Stem ». Substance ÉTS
Jean-René Poulin, David Barry, Vladimir Brailovski. 2016-10-14 « Fabrication additive d’une potence pour un vélo olympique d’Argon 18 ». Substance ÉTS
Yann Facchinello, Martin Brummund, Jean-Marc Mac-Thiong, Yvan Petit, Vladimir Brailovski. 2016-08-22 « Optimiser les implants vertébraux par modélisation ». Substance ÉTS
Yann Facchinello, Martin Brummund, Jean-Marc Mac-Thiong, Yvan Petit, Vladimir Brailovski. 2016-08-22 « Optimizing Spinal Implants through Modeling ». Substance ÉTS
Bruno Jetté, Morgan Letenneur, Mykhalio Samoilenko, Vladimir Brailovski. 2016-06-07 « Making the Most of Additive Manufacturing: Facing the Challenge ». Substance ÉTS
Bruno Jetté, Morgan Letenneur, Mykhalio Samoilenko, Vladimir Brailovski. 2016-06-07 « Tirer profit de la fabrication additive : un défi à relever ». Substance ÉTS

G. Bernier, Y. Petit, F. Marchand, P. Terriault, S. Nadeau. 2015 « Chapter 9: Case study : Toy design ».
V. Brailovski, P. Terriault, S. Prokoshkin, C. Simoneau, J. Rivard, S. Dubinskiy. 2015 « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ». Materials Today: Proceedings vol. 2 , nº Supp. 3. p. S511-S516
Simon Lacasse, Patrick Terriault, Charles Simoneau, Vladimir Brailovski. 2015 « Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ». Journal of Intelligent Material Systems and Structures vol. 26 , nº 15. p. 2055-2072
C. Simoneau, P. Terriault, V. Brailovski. 2015 « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ».
C. Simoneau, P. Terriault, V. Brailovski. 2015 « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». Affiche présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015)
P. Terriault, V. Brailovski. 2015 « Influence of boundary conditions on the simulation of architectured porous structures ».
P. Terriault, V. Brailovski. 2015 « Influence of boundary conditions on the simulation of architectured porous structures ». Affiche présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015)
V. Brailovski, P. Terriault, S. Prokoshkin, C. Simoneau, J. Rivard, S. Dubinskiy. 2015 « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ». Materials Today: Proceedings vol. 2 , nº Supp. 3. p. S511-S516
Vladimir Brailovski, Sergey Prokoshkin, Karine Inaekyan, Mikhail Petrzhik, Mikhail Filonov, Yuriy Pustov, Sergey Dubinskiy, Yulia Zhukova, Andrey Korotitskiy, Vadim Sheremetyev. 2015 « Thermomechanical treatment of Ti-Nb solid solution based SMA ». Foundations of Materials Science and Engineering vol. 81-82. p. 342-405
M. Brummund, V. Brailovski, Y. Petit, Y. Facchinello, J. M. Mac-Thiong. 2015 « Influence of spinal instrumentation stiffness on the mobility of porcine lumbar spine ». Communication lors de la conférence : 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (Montreal, QC, Canada, Sept. 01-05, 2015)
Martin Brummund, Vladimir Brailovski, Yann Facchinello, Yvan Petit, Jean-Marc Mac-Thiong. 2015 « Implementation of a 3D porcine lumbar finite element model for the simulation of monolithic spinal rods with variable flexural stiffness ».
Y. Facchinello, V. Brailovski, Y. Petit, M. Brummund, J. M. Mac-Thiong. 2015 « Tiges monolithiques aux propriétés variables pour la stabilisation de la colonne vertébrale : étude biomécanique ». Communication lors de la conférence : 45e Réunion Annuelle de la Société de Scoliose du Québec (St-Sauveur, QC, Canada, 15-17 oct. 2015)
Yann Facchinello, Vladimir Brailovski, Yvan Petit, Martin Brummund, Jaëlle Tremblay, Jean-Marc Mac-Thiong. 2015 « Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement ». Clinical Biomechanics vol. 30 , nº 10. p. 1026-1035
Yann Facchinello, Vladimir Brailovski, Yvan Petit, Martin Brummund, Jaelle Tremblay, Jean-Marc Mac-Thiong. 2015 « In-vitro assessment of the stabilization capacity of monolithic spinal rods with variable flexural stiffness: methodology and examples ».
K. Inaekyan, Vladimir Brailovski, S. Prokoshkin, V. Pushin, S. Dubinskiy, V. Sheremetyev. 2015 « Comparative study of structure formation and mechanical behavior of age-hardened Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ». Materials Characterization vol. 103. p. 65-74
A. Kreitcberg, Vladimir Brailovski, S. Prokoshkin, D. Gunderov, M. Khomutov, K. Inaekyan. 2015 « Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti-50at%Ni alloy ». Materials Science and Engineering A vol. 622. p. 21-29
Simon Lacasse, Patrick Terriault, Charles Simoneau, Vladimir Brailovski. 2015 « Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ». Journal of Intelligent Material Systems and Structures vol. 26 , nº 15. p. 2055-2072
S. Prokoshkin, V. Brailovski, K. Inaekyan, V. Demers, A. Kreitcberg. 2015 « Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ». Shape Memory and Superelasticity vol. 1 , nº 2. p. 191-203
Sergey Prokoshkin, Vladimir Brailovski, Karine Inaekyan, Andrey Korotitskiy, Alena Kreitcberg. 2015 « Thermomechanical treatment of TiNi intermetallic-based shape memory alloys ».
V. A. Sheremetyev, S. D. Prokoshkin, V. Brailovski, S. M. Dubinskiy, A. V. Korotitskiy, M. R. Filonov, M. I. Petrzhik. 2015 « Investigation of the structure stability and superelastic behavior of thermomechanically treated Ti-Nb-Zr and Ti-Nb-Ta shape-memory alloys ». Physics of Metals and Metallography vol. 116 , nº 4. p. 413-422
V. Sheremetyev, S. Prokoshkin, V. Brailovski, S. Dubinskiy, M. Filonov, M. Petrzhik. 2015 « Long-term stability of superelastic behavior of nanosubgrained Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ». Materials Today: Proceedings vol. 2 , nº suppl. 1. p. S26-S31
Vadim Sheremetyev, Sergey Prokoshkin, Sergey Dubinskiy, Vladimir Brailovski, Karine Inaekyan. 2015 « Fatigue properties of metastable beta Ti-22Nb-6Zr (at%) alloy for load-bearing biomedical applications ».
C. Simoneau, P. Terriault, V. Brailovski. 2015 « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ».
C. Simoneau, P. Terriault, V. Brailovski. 2015 « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». Affiche présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015)
P. Terriault, V. Brailovski. 2015 « Influence of boundary conditions on the simulation of architectured porous structures ».
P. Terriault, V. Brailovski. 2015 « Influence of boundary conditions on the simulation of architectured porous structures ». Affiche présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015)
Jaëlle Tremblay, Jean-Marc Mac-Thiong, Vladimir Brailovski, Yvan Petit. 2015 « Braided tubular superelastic cables provide improved spinal stability compared to multifilament sublaminar cables ». Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine vol. 229 , nº 9. p. 645-651
Jaëlle Tremblay, Jean-Marc Mac-Thiong, Vladimir Brailovski, Yvan Petit. 2015 « Factors affecting intradiscal pressure measurement during in vitrobiomechanical tests ». Scoliosis vol. 10 , nº Suppl 1. p. O19
Y. S. Zhukova, Y. A. Pustov, A. S. Konopatsky, S. M. Dubinskiy, M. R. Filonov, V. Brailovski. 2015 « Corrosion fatigue and electrochemical behavior of superelastic Ti-Nb-Ta alloy for medical implants under cyclic load conditions ». Materials Today: Proceedings vol. 2 , nº Supp. 3. p. S991-S994
Yulia Zhukova, Yury Pustov, Vadim Sheremetyev, Anton Konopatsky, Mikhail Filonov, Vladimir Brailovski. 2015 « Electrochemical characterization of oxidized nanostructured superelastic Ti-Nb-Zr alloy for medical implants ».
Bruno Jetté, Guillaume Fréchette, Olivier Guillemette, Robin Gaudreau, Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2015-08-19 « Comment prolonger la durée de vie des prothèses de la hanche? ». Substance ÉTS
Bruno Jetté, Guillaume Fréchette, Olivier Guillemette, Robin Gaudreau, Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2015-08-19 « Increasing Hip Prostheses’ Lifespan ». Substance ÉTS
Bruno Jetté, Guillaume Fréchette, Olivier Guillemette, Robin Gaudreau, Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2015-08-19 « Comment prolonger la durée de vie des prothèses de la hanche? ». Substance ÉTS
Bruno Jetté, Guillaume Fréchette, Olivier Guillemette, Robin Gaudreau, Charles Simoneau, Patrick Terriault, Vladimir Brailovski. 2015-08-19 « Increasing Hip Prostheses’ Lifespan ». Substance ÉTS

Vladimir Brailovski, Patrick Terriault, Sergei Prokoshkin, Jonathan Rivard, Charles Simoneau, Sergei Dubinskiy. 2014 « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
Sara Casciati, Antonio Isalgue, Vincenc Torra, Patrick Terriault. 2014 « SMA passive elements for damping in the stayed cables of bridges ».
Guillaume Maitrejean, Patrick Terriault, Diego Devis Capilla, Vladimir Brailovski. 2014 « Unit cell analysis of the superelastic behavior of open-cell tetrakaidecahedral shape memory alloy foam under quasi-static loading ». Smart Materials Research. p. 870649
Charles Simoneau, Patrick Terriault, Simon Lacasse, Vladimir Brailovski. 2014 « Adaptive composite panel with embedded SMA actuators: Modeling and validation ». Mechanics Based Design of Structures and Machines vol. 42 , nº 2. p. 174-192
Charles Simoneau, Patrick Terriault, Jonathan Rivard, Vladimir Brailovski. 2014 « Modeling of metallic foam morphology using the Representative Volume Element approach: Development and experimental validation ». International Journal of Solids and Structures vol. 51 , nº 21-22. p. 3633-3641
Patrick Terriault. 2014 « Développement de surfaces adaptatives pour des applications aéronautiques ». Communication lors de la conférence : Entretiens Jacques Cartiers "Colloque 12 - Les matériaux intelligents et leur impact sur notre qualité de vie" (Montréal, QC, Canada, 6 oct. 2014)
Patrick Terriault. 2014 « Modélisation multi-échelle de structres poreuses superélastiques ». Communication lors de la conférence : Séminaire du laboratoire Techniques de l’Ingénierie Médicale et de la Complexité - Informatique, Mathématiques et Applications (TIMC-IMAG), Université Joseph Fourier (Grenoble, France, 13 mai 2014)
Vicenc Torra, Guillem Carreras, Sara Casciati, Patrick Terriault. 2014 « On the NiTi wires in dampers for stayed cables ». Smart Structures and Systems vol. 13 , nº 3. p. 353-374
Vladimir Brailovski, Patrick Terriault, Sergei Prokoshkin, Jonathan Rivard, Charles Simoneau, Sergei Dubinskiy. 2014 « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
S. Dubinskiy, S. Prokoshkin, Vladimir Brailovski, K. Inaekyan, A. Korotitskiy. 2014 « In situ X-ray diffraction strain-controlled study of Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys: Crystal lattice and transformation features ». Materials Characterization vol. 88. p. 127-142
Yann Facchinello, Vladimir Brailovski, Yvan Petit, Jean-Marc Mac-Thiong. 2014 « Monolithic superelastic rods with variable flexural stiffness for spinal fusion: Simplified finite element analysis of an instrumented spine segment ».
Yann Facchinello, Vladimir Brailovski, Yvan Petit, Jean-Marc Mac-Thiong. 2014 « Monolithic superelastic rods with variable flexural stiffness for spinal fusion: modeling of the processing-properties relationship ». Medical Engineering and Physics vol. 36 , nº 11. p. 1455-1463
A. Yu Kreitcberg, S. D. Prokoshkin, Vladimir Brailovski, A. V. Korotitskiy. 2014 « Role of the structure and texture in the realization of the recovery strain resource of the nanostructured Ti-50.26 at %Ni alloy ». Physics of Metals and Metallography vol. 115 , nº 9. p. 926-947
A. Kreitcberg, Vladimir Brailovski, S. Prokoshkin, K. Inaekyan. 2014 « Influence of Thermomechanical Treatment on Structure and Crack Propagation in Nanostructured Ti-50.26 at%Ni Alloy ». Metallography, Microstructure, and Analysis vol. 3 , nº 1. p. 46-57
A. Kreitcberg, S. Prokoshkin, Vladimir Brailovski, D. Gunderov, M. Khomutov. 2014 « Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: a preliminary study ».
Guillaume Maitrejean, Patrick Terriault, Diego Devis Capilla, Vladimir Brailovski. 2014 « Unit cell analysis of the superelastic behavior of open-cell tetrakaidecahedral shape memory alloy foam under quasi-static loading ». Smart Materials Research. p. 870649
J. Rivard, Vladimir Brailovski, S. Dubinskiy, S. Prokoshkin. 2014 « Fabrication, morphology and mechanical properties of Ti and metastable Ti-based alloy foams for biomedical applications ». Materials Science and Engineering C vol. 45. p. 421-433
Charles Simoneau, Patrick Terriault, Simon Lacasse, Vladimir Brailovski. 2014 « Adaptive composite panel with embedded SMA actuators: Modeling and validation ». Mechanics Based Design of Structures and Machines vol. 42 , nº 2. p. 174-192
Charles Simoneau, Patrick Terriault, Jonathan Rivard, Vladimir Brailovski. 2014 « Modeling of metallic foam morphology using the Representative Volume Element approach: Development and experimental validation ». International Journal of Solids and Structures vol. 51 , nº 21-22. p. 3633-3641

T. Georges, Vladimir Brailovski, Patrick Terriault. 2013 « Experimental bench for shape memory alloys actuators design and testing ». Experimental Techniques vol. 37 , nº 6. p. 24-33
Guillaume Maîtrejean, Patrick Terriault, Vladimir Brailovski. 2013 « Density dependence of the macroscale superelastic behavior of porous shape memory alloys: a two-dimensional approach ». Smart Materials Research vol. 2013
Guillaume Maitrejean, Patrick Terriault, Vladimir Brailovski. 2013 « Density dependence of the superelastic behavior of porous shape memory alloys: Representative Volume Element and scaling relation approaches ». Computational Materials Science vol. 77. p. 93-101
Patrick Terriault, Vladimir Brailovski. 2013 « Implementation of Likhachev's model into a finite element program ».
Patrick Terriault, Simon Lacasse, Charles Simoneau, Vladimir Brailovski. 2013 « Adaptive composite panel with embedded SMA actuators: design, manufacturing, testing ».
V. Torra, C. Auguet, A. Isalgue, G. Carreras, Patrick Terriault, F. C. Lovey. 2013 « Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations ». Engineering Structures vol. 49. p. 43-57
V. Torra, A. Isalgue, C. Auguet, G. Carreras, F. C. Lovey, Patrick Terriault. 2013 « Damping in civil engineering using SMA part 2 - Particular properties of NiTi for damping of stayed cables in bridges ». Canadian Metallurgical Quarterly vol. 52 , nº 1. p. 81-89
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2013 « Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates ». Composite Structures vol. 100. p. 424-435
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2013 « Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates ». Composite Structures vol. 95. p. 227-235
Yannick Baril, Yan Bourgeois, Vladimir Brailovski, Kajsa Duke, G. Yves Laflamme, Yvan Petit. 2013 « Improving greater trochanteric reattachment with a novel cable plate system ». Medical Engineering & Physics vol. 35 , nº 3. p. 383-391
Vladimir Brailovski, S. Prokoshkin, M. Gauthier, K. Inaekyan, S. Dubinskiy. 2013 « Mechanical properties of porous metastable beta Ti-Nb-Zr alloys for biomedical applications ». Journal of Alloys and Compounds vol. 577. p. 413-417
Vladimir Brailovski, Sergey Prokoshkin, Karine Inaekyan, Sergey Dubinskiy. 2013 « Influence of omega-phase precipitation hardening on the static and dynamic properties of metastable beta Ti-Nb-Zr and Ti-Nb-Ta alloys ».
S. Dubinskiy, Vladimir Brailovski, S. Prokoshkin, V. Pushin, K. Inaekyan, V. Sheremetyev, M. Petrzhik, M. Filonov. 2013 « Structure and Properties of Ti-19.7Nb-5.8Ta Shape Memory Alloy Subjected to Thermomechanical Processing Including Aging ». Journal of Materials Engineering and Performance vol. 22 , nº 9. p. 2656-2664
Sergey Dubinskiy, Vladimir Brailovski, Sergey Prokoshkin, Karine Inaekyan. 2013 « In-situ X-ray study of phase transformations in Ti-Nb-based SMA under variable stress-temperature conditions: Preliminary results ».
Yann Facchinello, Vladimir Brailovski, Karina Inaekyan, Yvan Petit, Jean-Marc Mac-Thiong. 2013 « Manufacturing of monolithic superelastic rods with variable properties for spinal correction: Feasibility study ». Journal of the Mechanical Behavior of Biomedical Materials vol. 22. p. 1-11
T. Georges, Vladimir Brailovski, Patrick Terriault. 2013 « Experimental bench for shape memory alloys actuators design and testing ». Experimental Techniques vol. 37 , nº 6. p. 24-33
A. Kreitcberg, V. Brailovski, S. Prokoshkin, Y. Facchinello, К Inaekyan, S. Dubinskiy. 2013 « Microstructure and functional fatigue of nanostructured Ti–50.26 at%Ni alloy after thermomechanical treatment with warm rolling and intermediate annealing ». Materials Science and Engineering: A vol. 562. p. 118-127
Guillaume Maîtrejean, Patrick Terriault, Vladimir Brailovski. 2013 « Density dependence of the macroscale superelastic behavior of porous shape memory alloys: a two-dimensional approach ». Smart Materials Research vol. 2013
Guillaume Maitrejean, Patrick Terriault, Vladimir Brailovski. 2013 « Density dependence of the superelastic behavior of porous shape memory alloys: Representative Volume Element and scaling relation approaches ». Computational Materials Science vol. 77. p. 93-101
Jérémie Ménard, Maxime Émard, Fanny Canet, Vladimir Brailovski, Yvan Petit, George Y. Laflamme. 2013 « Initial tension loss in cerclage cables ». The Journal of Arthroplasty vol. 28 , nº 9. p. 1509-1512
Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2013 « On the use of shape memory alloy studs to recover load loss in bolted joints ». Journal of Pressure Vessel Technology vol. 135 , nº 2
S. Prokoshkin, Vladimir Brailovski, A. Korotitskiy, K. Inaekyan, S. Dubinskiy, M. Filonov, M. Petrzhik. 2013 « Formation of nanostructures in thermomechanically-treated Ti-Ni and Ti-Nb-(Zr, Ta) SMAs and their roles in martensite crystal lattice changes and mechanical behavior ». Journal of Alloys and Compounds vol. 577. p. 418-422
Sergey Prokoshkin, Vladimir Brailovski, Mikhail Petrzhik, Mikhail Filonov, Vadim Sheremetyev. 2013 « Mechanocyclic and time stability of the loading-unloading diagram parameters of nanostructured Ti-Nb-Ta and Ti-Nb-Zr SMA ».
V. A. Sheremet'Ev, S. M. Dubinskii, Yu S. Zhukova, Vladimir Brailovski, M. I. Petrzhik, S. D. Prokoshkin, Yu A. Pustov, M. R. Filonov. 2013 « Mechanical and electrochemical characteristics of thermomechanically treated superelastic Ti-Nb-(Ta, Zr) alloys ». Metal Science and Heat Treatment vol. 55 , nº 1-2. p. 100-108
Patrick Terriault, Vladimir Brailovski. 2013 « Implementation of Likhachev's model into a finite element program ».
Patrick Terriault, Simon Lacasse, Charles Simoneau, Vladimir Brailovski. 2013 « Adaptive composite panel with embedded SMA actuators: design, manufacturing, testing ».
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2013 « Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates ». Composite Structures vol. 100. p. 424-435
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2013 « Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates ». Composite Structures vol. 95. p. 227-235
Yannick Baril, Vladimir Brailovski, Raymond Cartier, Patrick Terriault. 2013-12-17 « Binding component ».
Yannick Baril, Vladimir Brailovski, Raymond Cartier, Patrick Terriault. 2013-12-17 « Binding component ».

T. Georges, V. Brailovski, P. Terriault. 2012 « Characterization and design of antagonistic shape memory alloy actuators ». Smart Materials and Structures vol. 21 , nº 3
Vicenc Torra, Carlota Auguet, Guillem Carreras, Lamine Dieng, Francisco C. Lovey, Patrick Terriault. 2012 « The SMA: An effective damper in Civil Engineering that smoothes oscillations ».
Vicenç Torra, Antonio Isalgue, Carlota Auguet, Fabio Casciati, Sara Casciati, Patrick Terriault. 2012 « SMA dampers for cable vibration: An available solution for oscillation mitigation of stayed cables in bridges ».
Y. Baril, Y. Bourgeois, V. Brailovski, K. Duke, G. Y. Laflamme, Y. Petit. 2012 « Testing system for the comparative evaluation of greater Trochanter re-attachment devices ». Experimental Techniques vol. 36 , nº 4. p. 74-82
Vladimir Brailovski, S. Prokoshkin, K. Inaekyan, S. Dubinskiy. 2012 « Influence of omega-phase precipitation hardening on the static and dynamic properties of beta Ti-Nb-Zr(Ta) alloys ». Communication lors de la conférence : European Symposium on Martensitic Transformations (ESOMAT) (Saint-Petersburg, Russia, Sept. 2-6, 2012)
Vladimir Brailovski, Sergey Prokoshkin, Karine Inaekyan, Sergey Dubinskiy, Maxime Gauthier. 2012 « Mechanical properties of thermomechanically-processed metastable beta Ti-Nb-Zr alloys for biomedical applications ».
S. Dubinskiy, Vladimir Brailovski, K. Inaekyan, S. Prokoshkin. 2012 « In-situ X-ray study of phase transformation in Ti-Nb-based SMA under variable stress-temperature conditions ». Communication lors de la conférence : European Symposium on Martensitic Transformations (ESOMAT) (Saint-Petersburg, Russia, Sept. 2-6, 2012)
Maxime Émard, Fanny Canet, Yannick Baril, Vladimir Brailovski, Yvan Petit, G.-Yves Laflamme. 2012 « Étude biomécanique de la fixation par cerclage de l'ostéotomie étendue du grand trochanter ». Communication lors de la conférence : 32e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montreal, QC, Canada, May 11, 2012)
Yann Facchinello, Vladimir Brailovski, Sergey D. Prokoshkin, Thomas Georges, Sergey M. Dubinskiy. 2012 « Manufacturing of nanostructured Ti-Ni shape memory alloys by means of cold/warm rolling and annealing thermal treatment ». Journal of Materials Processing Technology vol. 212 , nº 11. p. 2294-2304
T. Georges, V. Brailovski, P. Terriault. 2012 « Characterization and design of antagonistic shape memory alloy actuators ». Smart Materials and Structures vol. 21 , nº 3
Sergey Prokoshkin, Vladimir Brailovski, Karine Inaekyan, Andrey Korotitskiy, Sergey Dubinskiy, Mikhail Filonov, Mikhail Petrzhik. 2012 « A comparative study of structure formation in thermomechanically treated Ti-Ni and Ti-Nb-(Zr, Ta) SMA ».
Jaëlle Tremblay, Jean-Marc Mac-Thiong, Vladimir Brailovski, Yvan Petit. 2012 « Évaluation d'un nouveau montage expérimental pour l'évaluation biomécanique in vitro de la colonne vertébrale ». Affiche présentée lors de la conférence : 32e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, May 11, 2012)
Vladimir Brailovski, Raymond Cartier, Patrick Terriault, Yannick Baril. 2012-11-13 « Binding component ».
Vladimir Brailovski, Raymond Cartier, Patrick Terriault, Yannick Baril. 2012-11-13 « Binding component ».

Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Youssef Mébarki. 2011 « Aerostructural model for morphing laminar wing optimization in a wind tunnel ». Journal of Aircraft vol. 48 , nº 1. p. 66-76
Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Youssef Mébarki, Éric Laurendeau. 2011 « Lift-to-drag ratio and laminar flow control of a morphing laminar wing in a wind tunnel ». Smart Materials and Structures vol. 20 , nº 3
Charles Fischer, Patrick Terriault, Vladimir Brailovski. 2011 « Debonding characterization of SMA/polymer morphing structures ».
Thomas Georges, Vladimir Brailovski, Patrick Terriault. 2011 « Design of active bias SMA actuators for morphing wing applications ».
Patrick Terriault, Vladimir Brailovski. 2011 « Modeling of shape memory alloy actuators using Likhachev's formulation ». Journal of Intelligent Material Systems and Structures vol. 22 , nº 4. p. 353-368
Vicenc Torra, Antonio Isalgue, Carlota Auguet, Guillem Carreras, Fabio Casciati, Francisco C. Lovey, Patrick Terriault. 2011 « SMA in mitigation of extreme loads in civil engineering : study of their application in a realistic steel portico ».
Vicenç Torra, Antonio Isalgue, Carlota Auguet, Guillem Carreras, Francisco C. Lovey, Patrick Terriault, Lamine Dieng. 2011 « SMA in mitigation of extreme loads in civil engineering : damping actions in stayed cables ».
Vladimir Brailovski, S. D. Prokoshkin, M. Gauthier, K. E. Inaekyan, S. Dubinskiy, M. Petrzhik, M. R. Filonov. 2011 « Bulk and porous metastable beta Ti-Nb-Zr(Ta) alloys for biomedical applications ». Materials Science and Engineering C vol. 31 , nº 3. p. 643-657
Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2011 « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». Journal of Alloys and Compounds vol. 509 , nº 5. p. 2066-2075
Fanny Canet, Yannick Baril, Vladimir Brailovski, Yvan Petit, Guillaume Bissonnette, G. Yves Laflamme. 2011 « Force relaxation and sprinback of novel elastic orthopedic cables ».
Fanny Canet, Kajsa Duke, Yan Bourgeois, G. Yves Laflamme, Vladimir Brailovski, Yvan Petit. 2011 « Effect of force tightening on cable tension and displacement in greater trochanter reattachment ».
Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Youssef Mébarki. 2011 « Aerostructural model for morphing laminar wing optimization in a wind tunnel ». Journal of Aircraft vol. 48 , nº 1. p. 66-76
Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Youssef Mébarki, Éric Laurendeau. 2011 « Lift-to-drag ratio and laminar flow control of a morphing laminar wing in a wind tunnel ». Smart Materials and Structures vol. 20 , nº 3
S. M. Dubinskiy, S. D. Prokoshkin, Vladimir Brailovski, K. E. Inaekyan, A. V. Korotitskiy, M. R. Filonov, M. I. Petrzhik. 2011 « Structure formation during thermomechanical processing of Ti-Nb-(Zr, Ta) alloys and the manifestation of the shape-memory effect ». Physics of Metals and Metallography vol. 112 , nº 5. p. 503-516
Yann Facchinello, Vladimir Brailovski, Thomas Georges, Sergey D. Prokoshkin. 2011 « Functional properties of nanostructured Ti-Ni SMA produced by a combination of cold, warm rolling and annealing ».
M. R. Filonov, Vladimir Brailovski, S. D. Prokoshkin, Y. S. Zhukova, S. M. Dubinsky. 2011 « A study of structure formation in Ti-Nb-Zr shape memory alloys for medical application ».
Charles Fischer, Patrick Terriault, Vladimir Brailovski. 2011 « Debonding characterization of SMA/polymer morphing structures ».
Thomas Georges, Vladimir Brailovski, Patrick Terriault. 2011 « Design of active bias SMA actuators for morphing wing applications ».
N. Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Characteristics of a bolted joint with a shape memory alloy stud ».
Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Load recovery of a bolted joint with a shape memory alloy stud ».
S. D. Prokoshkin, A. V. Korotitskiy, Vladimir Brailovski, K. E. Inaekyan, S. M. Dubinskiy. 2011 « Crystal lattice of martensite and the reserve of recoverable strain of thermally and thermomechanically treated Ti-Ni shape- Memory alloys ». Physics of Metals and Metallography vol. 112 , nº 2. p. 170-187
Patrick Terriault, Vladimir Brailovski. 2011 « Modeling of shape memory alloy actuators using Likhachev's formulation ». Journal of Intelligent Material Systems and Structures vol. 22 , nº 4. p. 353-368
J. Tremblay, A. Levasseur, Yvan Petit, J. M. Mac-Thiong, Vladimir Brailovski. 2011 « Impact des conditions aux frontières sur le comportement biomécanique d'un segment vertébral : résultats préliminaires ». Affiche présentée lors de la conférence : 31e Journée de la Recherche : Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Canada, 6 mai 2011)
J. Tremblay, J.-M. Mac-Thiong, Vladimir Brailovski, Yvan Petit. 2011 « Évaluation d’un nouveau montage expérimental pour l’évaluation biomécanique in vitro de la colonne vertébrale ». Communication lors de la conférence : 41e Journée Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 27-29 oct. 2011)

G. Bernier, Yvan Petit, Françoise Marchand, Patrick Terriault, Sylvie Nadeau. 2010 « Case study : toy design ».
Vladimir Brailovski, Patrick Terriault. 2010 « A systematic approach to performance evaluation of shape memory alloys as actuator material ».
Vladimir Brailovski, Patrick Terriault, Thomas Georges, Daniel Coutu. 2010 « SMA actuators for morphing wings ».
Daniel Coutu, Vladimir Brailovski, Patrick Terriault. 2010 « Optimized design of an active extrados structure for an experimental morphing laminar wing ». Aerospace Science and Technology vol. 14 , nº 7. p. 451-458
Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010)
Van Ngan Lê, Henri Champliaud, Françoise Marchand, Patrick Terriault, Jean Arteau. 2010 « Effective learning of buckling of columns in engineering programs ».
M. Mamou, Y. Mebarki, M. Khalid, M. Genest, D. Coutu, A. V. Popov, C. Sainmont, T. Georges, L. Grigorie, Ruxandra Botez, Vladimir Brailovski, Patrick Terriault, I. Paraschivoiu, E. Laurendeau. 2010 « Aerodynamic performance optimization of a wind tunnel morphing wing model subject to various cruise flow conditions ».
V. Torra, A. Isalgue, G. Carreras, F. C. Lovey, H. Soul, P. Terriault, L. Dieng. 2010 « Experimental study of damping in civil engineering structures using smart materials (NiTi - SMA). Application to stayed cables for bridges ». International Review of Mechanical Engineering vol. 4 , nº 5. p. 601-611
Vicenc Torra, Antonio Isalgue, Ferran Martorell, Francisco C. Lovey, Patrick Terriault. 2010 « Damping in civil engineering using SMA. Part I : Particular properties of CuAlBe for damping of family houses ». Canadian Metallurgical Quarterly vol. 49 , nº 2. p. 179-190
Vicenc Torra, Francisco C. Lovey, Patrick Terriault. 2010 « Experimental study of damping in civil engineering structures using smart materials (Cu-Al-Be – NiTi SMA), applications to steel portico and to stayed cables for bridges (The SMARTeR project) ».
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2010 « Suppression of delamination propagation in carbon/epoxy laminates by use of superelastic stitching wires : preliminary results ».
Yannick Baril, Vladimir Brailovski. 2010 « Fatigue properties of superelastic Ti-Ni filaments and braided cables for bone fixation ». Journal of Biomedical Materials Research Part B-Applied Biomaterials vol. 92B , nº 2. p. 489-498
Yannick Baril, Vladimir Brailovski, Yan Bourgeois, Georges-Yves Laflamme, Yvan Petit. 2010 « Comparaison biomécanique entre deux systèmes de rattachement du grand trochanter ». Communication lors de la conférence : 30e Journée de la Recherche, Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Québec, Canada, 7 mai 2010)
Guillaume Bissonnette, Fanny Canet, Yannick Baril, Vladimir Brailovski, Yvan Petit, Georges-Yves Laflamme. 2010 « Nouveau câble iso-élastique : comparaison avec les câbles couramment utilisés en orthopédie ». Communication lors de la conférence : 30e Journée de la Recherche, Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Québec, Canada, 7 mai 2010)
Vladimir Brailovski, Patrick Terriault. 2010 « A systematic approach to performance evaluation of shape memory alloys as actuator material ».
Vladimir Brailovski, Patrick Terriault, Thomas Georges, Daniel Coutu. 2010 « SMA actuators for morphing wings ».
Fanny Canet, Yannick Baril, Guillaume Bissonnette, Vladimir Brailovski, Yvan Petit, Georges-Yves Laflamme. 2010 « A new superelastic cable for bone fixation in trauma : comparison with commonly used orthopaedic cables ». Affiche présentée lors de la conférence : 7th SICOT / SIROT Annual International Conference (Gothenburg, Sweden, Aug. 31-Sept. 3, 2010)
M. Chartrand, Vladimir Brailovski, Yannick Baril. 2010 « Test bench and methodology for sternal closure system testing ». Experimental Techniques vol. 34 , nº 3. p. 45-53
Daniel Coutu, Vladimir Brailovski, Patrick Terriault. 2010 « Optimized design of an active extrados structure for an experimental morphing laminar wing ». Aerospace Science and Technology vol. 14 , nº 7. p. 451-458
M. Mamou, Y. Mebarki, M. Khalid, M. Genest, D. Coutu, A. V. Popov, C. Sainmont, T. Georges, L. Grigorie, Ruxandra Botez, Vladimir Brailovski, Patrick Terriault, I. Paraschivoiu, E. Laurendeau. 2010 « Aerodynamic performance optimization of a wind tunnel morphing wing model subject to various cruise flow conditions ».
S. D. Prokoshkin, Vladimir Brailovski, A. V. Korotitskiy, K. E. Inaekyan, A. M. Glezer. 2010 « Specific features of the formation of the microstructure of titanium nickelide upon thermomechanical treatment including cold plastic deformation to degrees from moderate to severe ». Physics of Metals and Metallography vol. 110 , nº 3. p. 289-303
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2010 « Suppression of delamination propagation in carbon/epoxy laminates by use of superelastic stitching wires : preliminary results ».

Yannick Baril, Vladimir Brailovski, M. Chartrand, Patrick Terriault, R. Cartier. 2009 « Median sternotomy : comparative testing of braided superelastic and monofilament stainless steel sternal sutures ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine vol. 223 , nº H3. p. 363-374
Daniel Coutu, Vladimir Brailovski, Patrick Terriault. 2009 « Promising benefits of an active-extrados morphing laminar wing ». Journal of Aircraft vol. 46 , nº 2. p. 730-731
Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Éric Laurendeau. 2009 « Real-time optimization of a research morphing laminar wing in a wind tunnel ».
Thomas Georges, Vladimir Brailovski, Emeric Morellon, Daniel Coutu, Patrick Terriault. 2009 « Design of shape memory alloy actuators for morphing laminar wing with flexible extrados ». Journal of Mechanical Design vol. 131 , nº 9. p. 0910061-0910069
Thomas Georges, Vladimir Brailovski, Emeric Morellon, Daniel Coutu, Patrick Terriault. 2009 « Wind-tunnel testing of shape memory alloys actuators as morphing wing driving systems ».
A. Paradis, Patrick Terriault, Vladimir Brailovski. 2009 « Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading ». Computational Materials Science vol. 47 , nº 2. p. 373-383
Vicenc Torra, Antonio Isalgue, C. Auguet, G. Carreras, Francisco C. Lovey, H. Soul, Patrick Terriault. 2009 « Damping in civil engineering using SMA. The fatigue behavior and stability of CuAlBe and NiTi alloys ». Journal of Materials Engineering and Performance vol. 18 , nº 5-6. p. 738-745
Vicenc Torra, Antonio Isalgue, G. Carreras, Francisco C. Lovey, H. Soul, Patrick Terriault, B. Zapico. 2009 « The SMA properties in civil engineering applications. The SMARTeR project : use of SMA in damping of stayed cables for bridges ».
Vicenc Torra, Antonio Isalgue, Ferran Martorell, F. Casciati, Francisco C. Lovey, M. Peigney, Patrick Terriault, D. Tirelli, B. Zapico. 2009 « SMA in mitigation of extreme loads in civil engineering : damping of earthquake effects in family Houses ans in wind/rain actions for stayed cables in bridges ».
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2009 « Modeling of delamination initiation and propagation in composite laminates under monotonic tensile loading using the progressive damage modeling technique ». Science and Engineering of Composite Materials vol. 16 , nº 2. p. 99-114
Yannick Baril, Vladimir Brailovski, M. Chartrand, Patrick Terriault, R. Cartier. 2009 « Median sternotomy : comparative testing of braided superelastic and monofilament stainless steel sternal sutures ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine vol. 223 , nº H3. p. 363-374
V. Brailovski, S. D. Prokoshkin, V. Demers, K. Inaekyan, I. Yu Khmelevskaya. 2009 « Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ».
Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2009 « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ».
Daniel Coutu, Vladimir Brailovski, Patrick Terriault. 2009 « Promising benefits of an active-extrados morphing laminar wing ». Journal of Aircraft vol. 46 , nº 2. p. 730-731
Daniel Coutu, Vladimir Brailovski, Patrick Terriault, Mahmoud Mamou, Éric Laurendeau. 2009 « Real-time optimization of a research morphing laminar wing in a wind tunnel ».
V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009 « Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ». Journal of Materials Processing Technology vol. 209 , nº 6. p. 3096-3105
V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009 « Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ». Materials Science and Engineering : A vol. 513-514. p. 185-196
K. Duke, Yvan Petit, Vladimir Brailovski, Yan Bourgeois, C. Toueg, Georges-Yves Laflamme. 2009 « Fixation du grand trochanter : évaluation expérimentale du serrage des câbles et des déplacements du grand trochanter durant la marche ». Communication lors de la conférence : 29e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 24 avril 2009)
Kajsa Duke, Georges-Yves Laflamme, Vladimir Brailovski, Yan Bourgeois, Charles Toueg, Annie Levasseur, Yvan Petit. 2009 « Greater trochanter reattachment : experimental evaluation of cable tension and displacement during walking ». Affiche présentée lors de la conférence : Annual Meeting of the American Society of Biomechanics (State College, PA, August 26-29, 2009)
Thomas Georges, Vladimir Brailovski, Emeric Morellon, Daniel Coutu, Patrick Terriault. 2009 « Design of shape memory alloy actuators for morphing laminar wing with flexible extrados ». Journal of Mechanical Design vol. 131 , nº 9. p. 0910061-0910069
Thomas Georges, Vladimir Brailovski, Emeric Morellon, Daniel Coutu, Patrick Terriault. 2009 « Wind-tunnel testing of shape memory alloys actuators as morphing wing driving systems ».
K. E. Inaekyan, Vladimir Brailovski, S. D. Prokoshkin, A. V. Korotitskiy, A. Chernavina. 2009 « Microhardness of binary near-equiatomic Ti-Ni alloys after severe cold rolling and post-deformation annealing ».
K. E. Inaekyan, Vladimir Brailovski, S. D. Prokoshkin, A. V. Korotitskiy, A. M. Glezer. 2009 « Characterization of amorphous and nanocrystalline Ti-Ni-based shape memory alloys ». Journal of Alloys and Compounds vol. 473 , nº 1-2. p. 71-78
A. Paradis, Patrick Terriault, Vladimir Brailovski. 2009 « Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading ». Computational Materials Science vol. 47 , nº 2. p. 373-383
O. Scalzo, S. Turenne, M. Gauthier, Vladimir Brailovski. 2009 « Mechanical and microstructural characterization of porous NiTi shape memory alloys ». Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science vol. 40A , nº 9. p. 2061-2070
Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2009 « Modeling of delamination initiation and propagation in composite laminates under monotonic tensile loading using the progressive damage modeling technique ». Science and Engineering of Composite Materials vol. 16 , nº 2. p. 99-114

Y. Baril, Vladimir Brailovski, M. Chartrand, Patrick Terriault, R. Cartier. 2008 « In-vitro testing of a new superelastic sternum closure component ».
Y. Baril, Vladimir Brailovski, Patrick Terriault, R. Cartier. 2008 « Modeling and testing of a new sternal closure device using tubular mesh-like superelastic nitinol structure ».
Yannick Baril, Vladimir Brailovski, Patrick Terriault. 2008 « Fatigue properties of superelastic Ti-Ni filaments used in braided cables for bone fixation ».
Vladimir Brailovski, Patrick Terriault, D. Coutu, T. Georges, E. Morellon, C. Fischer, S. Bérubé. 2008 « Morphing laminar wing with flexible extrados powered by shape memory alloy actuators ».
T. Georges, Vladimir Brailovski, D. Coutu, Patrick Terriault. 2008 « Design diagram for linear SMA actuators integrated in a morphing wing structure ».
M. B. Jaber, H. Smaoui, Patrick Terriault. 2008 « Finite element analysis of a shape memory alloy three-dimensional beam based on a finite strain description ». Smart Materials and Structures vol. 17 , nº 4
P. Lafortune, Patrick Terriault, Vladimir Brailovski, V. Torra. 2008 « Superelasticity-related phenomena of shape memory alloy passive dampers ».
F. Martorell, V. Torra, A. Isalgue, M. Li Perea, Patrick Terriault, F. C. Lovey. 2008 « Damping by SMA in civil engineering structures ».
A. Paradis, Patrick Terriault, Vladimir Brailovski, V. Torra. 2008 « On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ». Smart Materials and Structures vol. 17 , nº 6
Patrick Terriault, P. Lafortune, Dominic Plamondon, Vladimir Brailovski. 2008 « Design of a progressively expandable stent using finite elements ».
V Torra, A Isalgue, C Auguet, F.C Lovey, J.L Pelegrina, Patrick Terriault. 2008 « Pre-stressed NiTi: effects of the thermodynamics forces and time ».
V Torra, I Isalgue, F Martorell, F.C Lovey, H Soul, Patrick Terriault. 2008 « Fatigue life in NiTi for damping applications ».
Y. Baril, Vladimir Brailovski, M. Chartrand, Patrick Terriault, R. Cartier. 2008 « In-vitro testing of a new superelastic sternum closure component ».
Y. Baril, Vladimir Brailovski, Patrick Terriault, R. Cartier. 2008 « Modeling and testing of a new sternal closure device using tubular mesh-like superelastic nitinol structure ».
Yannick Baril, Vladimir Brailovski, Patrick Terriault. 2008 « Fatigue properties of superelastic Ti-Ni filaments used in braided cables for bone fixation ».
Y. Bourgeois, K. Duke, G.-Y. Laflamme, Vladimir Brailovski, Yvan Petit. 2008 « Évaluation expérimentale du déplacement du grand trochanter après fixation avec plaques ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008)
Vladimir Brailovski. 2008 « Manufacturing of nanostructured Ti-Ni shape memory alloys ». Communication lors de la conférence : International Conference Strength of the Heterogeneous Structures (PROST) (Moscou, Russia, Apr. 8-10, 2008)
Vladimir Brailovski. 2008 « Pecularities of the structure and properties of nanostructured Ti-Ni alloy subjected to the thermomechanical processing ». Communication lors de la conférence : International Conference "Strength of the Heterogeneous Structures" (PROST) (Moscou, Russia, Apr. 8-10, 2008)
Vladimir Brailovski, S. Prokoshkin, K. Inaekyan, A. Korotitskiy, A. Glezer. 2008 « Structure and properties features of nanostructured Ti0Ni SMA after severe plastic deformation and post-deformation annealing ».
Vladimir Brailovski, Patrick Terriault, D. Coutu, T. Georges, E. Morellon, C. Fischer, S. Bérubé. 2008 « Morphing laminar wing with flexible extrados powered by shape memory alloy actuators ».
T. Georges, Vladimir Brailovski, D. Coutu, Patrick Terriault. 2008 « Design diagram for linear SMA actuators integrated in a morphing wing structure ».
I. Yu Khmelevskaya, S. D. Prokoshkin, I. B. Trubitsyna, M. N. Belousov, S. V. Dobatkin, E. V. Tatyanin, A. V. Korotitskiy, Vladimir Brailovski, V. V. Stolyarov, E. A. Prokofiev. 2008 « Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high-pressure torsion ». Materials Science and Engineering : A vol. 481-482. p. 119-122
I. Khmelevskaya, S. Prokoshkin, Vladimir Brailovski, K. Inaekyan, V. Demers, I. Gurtovaya, A. Korotitskiy, S. Dobatkin. 2008 « Functional properties of Ti-Ni-based shape memory alloys ».
Andrey V. Korotitskiy, K. E. Inaekyan, Vladimir Brailovski, Sergey D. Prokoshkin. 2008 « Long-term microhardness evolution in Ti-Ni shape memory alloys processed by severe cold rolling ».
P. Lafortune, Patrick Terriault, Vladimir Brailovski, V. Torra. 2008 « Superelasticity-related phenomena of shape memory alloy passive dampers ».
A. Paradis, Patrick Terriault, Vladimir Brailovski, V. Torra. 2008 « On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ». Smart Materials and Structures vol. 17 , nº 6
S. D. Prokoshkin, Vladimir Brailovski, K. E. Inaekyan, V. Demers, I. Yu Khmelevskaya, S. V. Dobatkin, E. V. Tatyanin. 2008 « Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ». Materials Science and Engineering : A vol. 481-482. p. 114-118
S. Prokoshkin, A. Korotitskiy, Vladimir Brailovski, K Inaekyan. 2008 « Effect of dislocation substructure and grain structure of B2-austenite on martensite lattice parameters and transformation lattice strain in binary Ti-Ni Alloys ».
S.D. Prokoshkin, A.V. Korotitskiy, Vladimir Brailovski, K.E. Inaekyan. 2008 « Effect of nanocrystalline structure and polygonized dislocaton substructure on Ti-Ni martensite lattice parameters and transformation latice strain ».
Patrick Terriault, P. Lafortune, Dominic Plamondon, Vladimir Brailovski. 2008 « Design of a progressively expandable stent using finite elements ».

D Coutu, Vladimir Brailovski, Patrick Terriault, C Fisher. 2007 « Experimental validation of the 3D numerical model for an adaptative laminar wing with flexible extrados ».
Pierre Lafortune, Jason McCormick, Reginald Desroches, Patrick Terriault. 2007 « Testing of superelastic recentering pre-strained braces for seismic resistant design ». Journal of Earthquake Engineering vol. 11 , nº 3. p. 383-399
Patrick Terriault, V. Torra, C. Fischer, Vladimir Brailovski, A. Isalgue. 2007 « Superelastic shape memory alloy damper equipped with a passive adaptable pre-straining mechanism ».
V. Torra, A. Isalgue, F. Martorell, Patrick Terriault, F. C. Lovey. 2007 « Built in dampers for family homes via SMA: an ANSYS computation scheme based on mesoscopic and microscopic experimental analyses ». Engineering Structures vol. 29 , nº 8. p. 1889-1902
Vladimir Brailovski, S. D. Prokoshkin, E. Bastarash, V. Demers, K. E. Inaekyan, I. Yu Khmelevskaya. 2007 « Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ».
D Coutu, Vladimir Brailovski, Patrick Terriault, C Fisher. 2007 « Experimental validation of the 3D numerical model for an adaptative laminar wing with flexible extrados ».
V. Demers, V. Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2007 « Functional properties of nanostructured Ti-50.0 at % Ni alloys ».
S. Prokoshkin, Vladimir Brailovski, K. Inaekyan, V. Demers, I. Khmelevskaya, S. Dobatkin, E. Tatyanin. 2007 « Severely cold-rolled and annealed Ti-Ni shape memory alloys : structure, transformations and functional properties ».
Patrick Terriault, V. Torra, C. Fischer, Vladimir Brailovski, A. Isalgue. 2007 « Superelastic shape memory alloy damper equipped with a passive adaptable pre-straining mechanism ».

D. Coutu, Vladimir Brailovski, V. Demers, Patrick Terriault. 2006 « The design diagram for optimal shape memory alloys linear actuators ».
A. Isalgue, F.C. Lovey, Patrick Terriault, F. Martorell, R.M. Torra, V. Torra. 2006 « SMA for dampers in civil engineering ». Materials Transactions vol. 47 , nº 3. p. 682-690
F. Martorell, A. Isalgue, V. Torra, F. C. Lovey, Patrick Terriault. 2006 « SMA a tool for passive damping in civil buildings ».
Patrick Terriault, F. Viens, Vladimir Brailovski. 2006 « Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS ». Computational Materials Science vol. 36 , nº 4. p. 397-410
Philippe Theriault, Patrick Terriault, Vladimir Brailovski, Richard Gallo. 2006 « Finite element modeling of a progressively expanding shape memory stent ». Journal of Biomechanics vol. 39 , nº 15. p. 2837-2844
Vladimir Brailovski, S. D. Prokoshkin, I. Yu Khmelevskaya, K. E. Inaekyan, V. Demers, E. Bastarache, S. V. Dobatkin, E. V. Tatyanin. 2006 « Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ». Materials Science and Engineering : A vol. 438-440. p. 597-601
Vladimir Brailovski, Sergui D. Prokoshkin, Irina Yu. Khmelevskaya, Karine E. Inaekyan, Vincent Demers, Sergui V. Dobatkin, Evgeny V. Tatyanin. 2006 « Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ». Materials Transactions vol. 47 , nº 3. p. 795-804
D. Coutu, Vladimir Brailovski, V. Demers, Patrick Terriault. 2006 « The design diagram for optimal shape memory alloys linear actuators ».
V. Demers, Vladimir Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2006 « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Journal of ASTM International vol. 3 , nº 6
P. Masson, P. Micheau, Y. Pasco, Marc Thomas, Vladimir Brailovski, M. Meunier, Y.-A Peter, I.-H Song, D. Mateescu, A. Misra, N. Mrad, J. Pinsonneault. 2006 « Smart technologies for structural health monitoring of aerospace structures ».
S. D. Prokoshkin, Vladimir Brailovski, I. Yu Khmelevskaya, S. V. Dobatkin, K. E. Inaekyan, V. Demers, E. Bastarache, E. V. Tatianin. 2006 « Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ». Bulletin of the Russian Academy of Sciences : Physics vol. 70 , nº 9. p. 1536-1541
S. D. Prokoshkin, A. V. Korotitskiy, A. V. Tamonov, I. Yu Khmelevskaya, Vladimir Brailovski, S. Turenne. 2006 « Comparative X-ray and time-of-flight neutron diffraction studies of martensite crystal lattice in stressed and unstressed binary Ti-Ni alloys ». Materials Science and Engineering : A vol. 438-440. p. 549-552
S. Prokoshkin, I. Khmelevskaya, S. Dobatkin, I. Trubitsyna, E. Tatyanin, S. Turenne, Vladimir Brailovski, V. Stolyarov, E. Prokofiev. 2006 « Thermomechanical conditions for nanocrystalline structure formation and functional properties of severely deformed Ti-Ni shape memory alloys ».
Patrick Terriault, F. Viens, Vladimir Brailovski. 2006 « Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS ». Computational Materials Science vol. 36 , nº 4. p. 397-410
Philippe Theriault, Patrick Terriault, Vladimir Brailovski, Richard Gallo. 2006 « Finite element modeling of a progressively expanding shape memory stent ». Journal of Biomechanics vol. 39 , nº 15. p. 2837-2844

Y. Baril, Vladimir Brailovski, R. Cartier, Patrick Terriault. 2005 « Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ».
François-Simon Gauthier, Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2005 « Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ».
V. Torra, A. Isalgue, F. Martorell, Patrick Terriault, F. Lovey. 2005 « Built in dampers for family homes via SMA : an ANSYS computation scheme on the mesoscopic and the microscopic experimental analysis ».
V. Torra, A. Isalgue, Patrick Terriault, A. Lovey. 2005 « From experimental data to quake damping by SMA: a critical experimental analysis and simulation ».
Franklin Wong, Olivier Boissonneault, Patrick Terriault. 2005 « Hybrid micro-macro-mechanical constitutive model for shape-memory alloys ».
Y. Baril, Vladimir Brailovski, R. Cartier, Patrick Terriault. 2005 « Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ».
François-Simon Gauthier, Pierre-Luc Vachon, Vladimir Brailovski, Patrick Terriault. 2005 « Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ».
K. E. Inaekyan, S. D. Prokoshkin, V. Brailovski, I. Yu. Khmelevskaya, V. Demers, S. V. Dobatkin, E. V. Tatyanin, E. Bastarache. 2005 « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ».
S. Prokoshkin, Vladimir Brailovski, I. Khmelevskaya, S. Dobatkin, K. Inaekyan, V. Turilina, V. Demers, E. Tat'yanin. 2005 « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment vol. 47 , nº 5-6. p. 182-187

E. Clement, Vladimir Brailovski, Patrick Terriault, E. Trochu. 2004 « Influence of stress concentration on the thermomechanical behavior of NiTi shape memory alloys ».
Vladimir Brailovski, I. Y. Khmelevskaya, S. D. Prokoshkin, V. G. Pushin, E. P. Ryklina, R. Z. Valiev. 2004 « Foundations of heat and thermomechanical treatments and their effect on the structure and properties of titanium nickelide-based alloys ». The Physics of Metals and Metallography vol. 97 , nº Suppl. 1. p. S3-S55
E. Clement, Vladimir Brailovski, Patrick Terriault, E. Trochu. 2004 « Influence of stress concentration on the thermomechanical behavior of NiTi shape memory alloys ».
S. D. Prokoshkin, I. Y. Khmelevskaya, Vladimir Brailovski, F. Trochu, S. Turenne, V. Y. U. Turilina. 2004 « Thermomechanical treatments and their influence on the microstructure and stress/strain diagrams of NiTi shape memory alloys ». Canadian Metallurgical Quarterly vol. 43 , nº 1. p. 95-108
S. D. Prokoshkin, A. V. Korotitskiy, Vladimir Brailovski, S. Turenne, I. Yu Khmelevskaya, I. B. Trubitsyna. 2004 « On the lattice parameters of phases in binary Ti-Ni shape memory alloys ». Acta Materialia vol. 52 , nº 15. p. 4479-4492

Vladimir Brailovski, Sergei Prokoshkin, Patrick Terriault, F. Trochu. 2003 « Shape memory alloys : fundamentals, modeling and applications ». Montreal, Canada : École de technologie supérieure. 844 p.
Vladimir Brailovski, E. Clement, Patrick Terriault, F. Trochu. 2003 « Influence of stress concentration on the recovery stress generation ».
Vladimir Brailovski, S. Prokoshkin, Patrick Terriault, F. Trochu. 2003 « Historical summary ».
Patrick Terriault. 2003 « Finite element modeling ».
Patrick Terriault, Karim Settouane, Vladimir Brailovski. 2003 « Biaxial testing at different temperatures of cruciform Ti-Ni samples ».
Patrick Terriault, A. Volkov, F. Trochu. 2003 « Constitutive relations ».
Vladimir Brailovski, Sergei Prokoshkin, Patrick Terriault, F. Trochu. 2003 « Shape memory alloys : fundamentals, modeling and applications ». Montreal, Canada : École de technologie supérieure. 844 p.
Vladimir Brailovski. 2003 « Recovery strain and shape recovery rate ».
Vladimir Brailovski. 2003 « Stress-strain diagrams ».
Vladimir Brailovski, E. Clement, Patrick Terriault, F. Trochu. 2003 « Influence of stress concentration on the recovery stress generation ».
Vladimir Brailovski, S. Prokoshkin, Patrick Terriault, F. Trochu. 2003 « Historical summary ».
Vladimir Brailovski, Sergei Prokoshkin. 2003 « Principles of optimization of thermomechanical treatment ».
Vladimir Brailovski, S. Turenne, F. Trochu. 2003 « Fatigue and degradation of SME ».
D. Y. Makarenkov, Vladimir Brailovski, F. Trochu. 2003 « Calculation of shape recovery in textured SM material ».
D. L. Piron, Vladimir Brailovski. 2003 « Corrosion and its prevention in shape memory alloys ».
S. D. Prokoshkin, Vladimir Brailovski, S. Turenne, I. Y. Khmelevskaya, A. V. Korotitskiy, I. B. Trubitsyna. 2003 « Concentration, temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys ».
S. D. Prokoshkin, Vladimir Brailovski, S. Turenne, I. Yu Khmelevskaya, A. V. Korotitskii, I. B. Trubitsyna. 2003 « On the lattice parameters of the B19' martensite in binary Ti-Ni shape-memory alloys ». Physics of Metals and Metallography vol. 96 , nº 1. p. 55-64
S. D. Prokoshkin, I. Y. Khmelevskaya, Vladimir Brailovski, F. Trochu, S. Turenne, V. Y. Turilina, K. E. Inaekyan. 2003 « Comparative study of structure and strain diagram changes in Ti-Ni alloys thermomechanically treated in martensitic or austenitic states ».
Patrick Terriault, Karim Settouane, Vladimir Brailovski. 2003 « Biaxial testing at different temperatures of cruciform Ti-Ni samples ».
S. Turenne, Vladimir Brailovski. 2003 « Characterization of shape memory alloys ».

Vladimir Brailovski, Patrick Terriault, Sergei Prokoshkin. 2002 « Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys ». Journal of Materials Engineering and Performance vol. 11 , nº 6. p. 614-621
Patrick Terriault, Vladimir Brailovski, K. Settouane. 2002 « The benefits of using phenomenological material laws in finite element modeling of SMA structures ». Communication lors de la conférence : 3rd World Conference on Structural Control (Como, Italia, Apr., 2002)
Patrick Terriault, Jean-François Châtelain. 2002 « Développement de travaux personnalisés en conception assistée par ordinateur ».
Vladimir Brailovski, Patrick Terriault, Sergei Prokoshkin. 2002 « Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys ». Journal of Materials Engineering and Performance vol. 11 , nº 6. p. 614-621
M. A. Crampon, Vladimir Brailovski, M. Sawan, F. Trochu. 2002 « Nerve cuff electrode with shape memory alloy armature : design and fabrication ». Bio-Medical Materials and Engineering vol. 12 , nº 4. p. 397-410
Patrick Terriault, Vladimir Brailovski, K. Settouane. 2002 « The benefits of using phenomenological material laws in finite element modeling of SMA structures ». Communication lors de la conférence : 3rd World Conference on Structural Control (Como, Italia, Apr., 2002)

Patrick Terriault, François Trochu. 2001 « The use of computer aided tools for the development of new shape medical applications ».
Vladimir Brailovski. 2001 « Optimization of the Post-Deformation Annealing Heat Treatment for NiTi Shape Memory Alloys ».
S. D. Prokoshkin, I. Y. Khmelevskaya, Vladimir Brailovski, F. Trochu, V. Y. Turilina. 2001 « Structure features, phase content and strain diagram parameters of Ti-Ni shape memory alloys after LTMT and post-deformation heating ». Metallofizika I Noveishie Tekhnologii vol. 23. p. 26-32
S. D. Prokoshkin, I. Yu Khmelevskaya, Vladimir Brailovski, F. Trosho, V. Yu Turilina. 2001 « Structure and deformation diagrams of Ti-Ni alloys subjected to a low-temperature thermomechanical treatment with postdeformation heating ». Physics of Metals and Metallography vol. 91 , nº 4. p. 423-31

P. Terriault. 2000 « L'utilisation d'outils de conception assistée par ordinateur pour le développement d'applications médicales en alliage à mémoire de forme ».
D. Yu. Makarenkov, Vladimir Brailovski, F. Trochu. 2000 « Calculation of recovery strain in a textured TiNi sheet ». Communication lors de la conférence : International Meeting New Materials and New Technologies in New Millennium (Crimea, Ukraine, Sept. 19-23, 2000)
S. D. Prokoshkin, S. Turenne, I. Yu Khmelevskaya, Vladimir Brailovski, F. Trochu. 2000 « Structural mechanisms of high-temperature shape changes in titanium-nickel alloys after Low-Temperature Thermomechanical Treatment ». Canadian Metallurgical Quarterly vol. 39 , nº 2. p. 225-234
S. D. Prokoshkin, S. Tyurenn, I. Yu Khmelevskaya, Vladimir Brailovski, F. Troshyu. 2000 « X-ray diffraction study of a high-temperature shape-memory effect in titanium nickelide ». Physics of Metals and Metallography vol. 90 , nº 2. p. 128-33
S. Turenne, S. Prokoshkin, Vladimir Brailovski, N. Sacépé. 2000 « Mechanical and X-ray characterisation of the assisted two-way shape memory effect in NiTi ». Canadian Metallurgical Quarterly vol. 39 , nº 2. p. 217-224

P. Terriault, F. Trochu. 1999 « Application of dual kriging to the phenomenological modeling of shape memory alloys ».
P. Terriault, F. Trochu. 1999 « Finite element simulation of three dimensional shape memory devices ».
Patrick Terriault, Francois Trochu, Vladimir Brailovski. 1999 « Tensorial generalization of a phenomenological material law for shape memory alloys ».
O. Volkov, F. Trochu, Vladimir Brailovski, N. Sacepe, Patrick Terriault. 1999 « Material law for NITI shape memory alloys based on dual kriging interpolation ». Journal of the Mechanical Behavior of Materials vol. 10 , nº 4. p. 215-226
Patrick Terriault, Francois Trochu, Vladimir Brailovski. 1999 « Tensorial generalization of a phenomenological material law for shape memory alloys ».
O. Volkov, F. Trochu, Vladimir Brailovski, N. Sacepe, Patrick Terriault. 1999 « Material law for NITI shape memory alloys based on dual kriging interpolation ». Journal of the Mechanical Behavior of Materials vol. 10 , nº 4. p. 215-226

F. Trochu, P. Terriault. 1998 « Nonlinear modelling of hysteretic material laws by dual kriging and application ». Computer Methods in Applied Mechanics and Engineering vol. 151 , nº 3-4. p. 545-558

P. Terriault, M. A. Meunier, F. Trochu. 1997 « Application of dual kriging to the construction of a general phenomenological material law for shape memory alloys ». Journal of Intelligent Material Systems and Structures vol. 8 , nº 7. p. 605-618

C. Labrecque, M. Braunovic, P. Terriault, F. Trochu, M. Schetky. 1996 « Experimental and theoretical evaluation of the behavior of a shape memory alloy Belleville washer under different operating conditions ».
F. Trochu, V. Brailovski, M. A. Meunier, P. Terriault, Y. Y. Qian. 1996 « Thermomechanical analysis of shape memory devices ». Bio-Medical Materials and Engineering vol. 6 , nº 6. p. 389-403
F. Trochu, V. Brailovski, M. A. Meunier, P. Terriault, Y. Y. Qian. 1996 « Thermomechanical analysis of shape memory devices ». Bio-Medical Materials and Engineering vol. 6 , nº 6. p. 389-403

Portes ouvertes

Publications

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996