Publications

Madani Grine, Mohamed Slamani, Aissa Laouissi, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2024. « Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ». International Journal of Advanced Manufacturing Technology. vol. 130 , nº 5-6. p. 3115-3132.

Madani Grine, Mohamed Slamani, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2023. « Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material ». International Journal of Advanced Manufacturing Technology. vol. 128 , nº 7-8. p. 3183-3196.

R. Côté, D. Delbergue, V. Demers. 2023. « Detection of defects in parts produced by material extrusion 3D printing using in-line pressure measurement ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Raphaël Côté, Vincent Demers, Nicole R. Demarquette, Sébastien Charlon, Jérémie Soulestin. 2023. « A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer ». Additive Manufacturing. vol. 68

Raphaël Cote, Vincent Demers, Nicole R. Demarquette, Sébastien Charlon, Jérémie Soulestin. 2023. « Producing metallic parts using 3D printing of low-viscosity powder-binder feedstock: A feasibility study ». 37th International Conference of the Polymer Processing Society (Fukuoka, Japan, Apr. 11-15, 2022) AIP Publishing.

D. Delbergue, L. Boudeau, V Demers. 2023. « Development of an aluminum-based feedstock for material extrusion 3D printing ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Vincent Demers. 2023. « Material extrusion 3D printing using low-viscosity MIM-like feedstocks ». International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Foad Haghniaz, Dorian Delbergue, Raphaël Côté, Vincent Demers. 2023. « Mold filling behaviour of LPIM feedstocks using numerical simulations and real-scale injections ». Powder Metallurgy. 14 p. (Sous presse)

Rafael S. Kurusu, Mohsen Gholami, Nicole R. Demarquette, Vincent Demers. 2023. « Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion ». International Journal of Advanced Manufacturing Technology. vol. 126 , nº 1-2. p. 381-390.

Saleh Meiabadi, Vincent Demers, Louis Dufresne. 2023. « Smoothed particle hydrodynamics approach for simulation of non-newtonian flow of feedstocks used in powder injection molding ». Metals. vol. 13 , nº 9.

Saleh Meiabadi, Fardin Nematzadeh, Kianoosh Kornokar, Hossein Mostaan, Mahmoud ShamsBorhan, Rasoul Khandan, Vincent Demers, Jonathan Lawrence, Mahmoud Moradi. 2023. « Contrasting the mechanical and metallurgical properties of laser welded and gas tungsten arc welded S500MC steel ». Welding in the World. (Sous presse)

Mahmoud Moradi, Kianoosh Kornokar, Fardin Nematzadeh, Hossein Mostaan, Saleh Meiabadi, Vincent Demers, Jonathan Lawrence. 2023. « Microstructural and mechanical investigation on fiber laser welding of S500MC steel ». Sadhana - Academy Proceedings in Engineering Sciences. vol. 48 , nº 1.

Mohamed Ahmed Omrane, Raphaël Côté, Vincent Demers. 2023. « Optimization of the printability envelope of low-viscosity powder-binder feedstocks used in material extrusion 3D printing ». Rapid Prototyping Journal. (Sous presse)

Emmanuel Pelletier, Vincent Demers. 2023. « Testing the limits of low-viscosity feedstock in material extrusion 3D printing of highly-filled polymer ». Communication lors de la conférence : HI-AM Conference ( Halifax, NS, Canada, June 27-28, 2023 )

Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2023. « Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ». Powder Technology. vol. 420

Frederic Bedard, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023. « Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ». International Journal of Advanced Manufacturing Technology. vol. 128 , nº 5-6. p. 2311-2317.

Prashant Dhondapure, Pierre Tize Mha, Soumyaranjan Nayak, Lea Ebacher, Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2023. « Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ». Journal of Materials Research and Technology. vol. 27 p. 8244-8257.

Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2023. « Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ». Canadian Metallurgical Quarterly. (Sous presse)

Antoine Geisler, Morteza Sadeghifar, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023. « Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study ». International Journal of Material Forming. vol. 16 , nº 1.

Faiçal Habassi, Manel Houria, Noureddine Barka, Mohammad Jahazi. 2023. « Influence of post-treatment on microstructure and mechanical properties of additively manufactured C300 maraging steel ». Materials Characterization. vol. 202

Mahshad Javidikia, Morteza Sadeghifar, Henri Champliaud, Mohammad Jahazi. 2023. « Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ». Journal of Advanced Joining Processes. vol. 8

Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023. « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials. vol. 16 , nº 17.

Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantale. 2023. « Interpolation and extrapolation performance measurement of analytical and ANN-based flow laws for hot deformation behavior of medium carbon steel ». Metals. vol. 13 , nº 3.

Sajad Mirzaei, Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean -Benoit Morin, Abdelhalim Loucif, Mohammad Jahazi. 2023. « Influence of spacers and skid sizes on heat treatment of large forgings within an industrial electric furnace ». Energies. vol. 16 , nº 7.

Musa Muhammed, Mousa Javidani, Majid Heidari, Mohammad Jahazi. 2023. « Enhancing the tribological performance of tool steels for wood-processing applications: A comprehensive review ». Metals. vol. 13 , nº 8.

Narges Omidi, Pedram Farhadipour, Lamya Baali, Karim Bensalem, Noureddine Barka, Mohammad Jahazi. 2023. « A comprehensive review of additively manufactured H13 tool steel applicable in the injection mold industry: Applications, designs, microstructure, mechanical properties ». JOM. vol. 75 , nº 11. p. 4457-4469.

Gamaliel Salazar, Jean-Sébastien Lemyre-Baron, Mohammad Jahazi, Henri Champliaud, Antoine Tahan. 2023. « Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ». Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023) p. 106-113. ASM International.

Sandrine A. Tcheuhebou Tina, Mahshad Javidikia, Mohammad Jahazi, Victor Songmene. 2023. « The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ». Processes. vol. 11 , nº 4.

Pierre Tize Mha, Prashant Dhondapure, Mohammad Jahazi, Amèvi Tongne, Olivier Pantalé. 2023. « Artificial neural network-based critical conditions for the dynamic recrystallization of medium carbon steel and application ». Metals. vol. 13 , nº 10.

Ashkan Hosseini, Elmira Moosavi-Khoonsari, Koen Meijer, Johannes Hage, Tim Peeters, Erik Offerman, Yongxiang Yang. 2023. « Thermodynamic analysis of zinc ferrite (ZnFe2O4) formation inside the HIsarna off-gas system ». Ironmaking & Steelmaking. vol. 50 , nº 5. p. 485-499.

Elmira Moosavi-Khoonsari, Jesus Alejandro Arias-Hernandez, Sun Yong Kwon. 2023. « Review and perspective on polyhedron model for estimating thermodynamic properties of oxides ». Journal of the American Ceramic Society. (Sous presse)

Elmira Moosavi-Khoonsari, Sina Mostaghel. 2023. « Thermodynamic assessment of tin-smelting from cassiterite concentrates ». Canadian Metallurgical Quarterly. (Sous presse)

Elmira Moosavi-Khoonsari, Sina Mostaghel, Andreas Siegmund. 2023. « Technology selection for slag zinc fuming process ». 10th International Conference on Lead and Zinc Processing (Lead-Zinc) (Changsha, China, Oct. 17-20, 2023) IOP Publishing.

Mohammed Alkhabbat, François Nadeau, Fatemeh Mirakhorli, Thien-My Dao, Xuan Tan Pham. 2023. « Effect of laser welding parameters with different fillers on solidification cracking and mechanical properties of AA7075 ». Metals. vol. 13 , nº 10.

Conrad Boton, Louis Rivest, Sylvain Kubicki, Oussama Ghnaya. 2023. « 4D simulation research in construction: A systematic mapping study ». Archives of Computational Methods in Engineering. vol. 30 , nº 4. p. 2451-2472.

Bruno Cognet, Jean-Philippe Pernot, Louis Rivest, Christophe Danjou. 2023. « Systematic comparison of digital maturity assessment models ». Journal of Industrial and Production Engineering. vol. 40 , nº 7. p. 519-537.

Oussama Ghnaya, Hamidreza Pourzarei, Louis Rivest, Conrad Boton. 2023. « Role of electronic document management systems in the design change management process ». Proceedings of the Canadian Society of Civil Engineering Annual Conference 2022 (Whistler, BC, Canada, May 25-28, 2022) p. 673-685. Springer Science and Business Media.

Elodie Hochscheid, Maggie Falardeau, James Lapalme, Conrad Boton, Louis Rivest. 2023. « Practitioners' concerns about their liability toward BIM collaborative digital mockups: Case study in civil engineering ». Journal of Construction Engineering and Management. vol. 149 , nº 9.

C. Tiaya, S. Nadeau, C. Boton, L. Rivest. 2023. « Maquettes numériques comme outil de prévention par la conception des risques de SST de la phase d’exploitation et de maintenance des ouvrages industriels ». Communication lors de la conférence : Groupe BIM du Québec : Soirée conférence - Impact social et économique ( Montréal, QC, Canada, 21 juin 2023 )

Kevin Gildas Dongmo Tambah, Jean-Pierre Kenné, Victor Songmene. 2023. « Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ». Journal of Quality in Maintenance Engineering. vol. 29 , nº 1. p. 1-26.

Abram Girgis, Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023. « Effect of Cu content on the alloy tensile properties of Al-Cu based alloys tested at 25 degrees C and 250 degrees C: Application of the concept of quality index ». Materials. vol. 16 , nº 4.

A. M. A. Mohamed, E. Samuel, A. M. Samuel, F. H. Samuel, V. Songmene, H. W. Doty. 2023. « Effect of intermetallics and tramp elements on porosity formation and hardness of Al-Si-Mg and Al-Si-Cu-Mg alloys ». International Journal of Metalcasting. vol. 17 , nº 2. p. 664-681.

A. M. A. Mohamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2023. « Effect of free cutting elements on the microstructural evaluation and mechanical properties of Al–Si cast alloys ». International Journal of Metalcasting. vol. 17 , nº 2. p. 959-979.

Lida Radan, Victor Songmene, Yasser Zedan, Fawzy H. Samuel. 2023. « Investigating the effect of heat treatment on the microstructure and hardness of aluminum-lithium alloys ». Materials. vol. 16 , nº 19.

Morteza Sadeghifar, Mahshad Javidikia, Abdelhalim Loucif, Mohammad Jahazi, Victor Songmene. 2023. « Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling ». Journal of Materials Research and Technology. vol. 24 p. 395-406.

Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023. « A comparative study of grain refining of Al-(7–17%) Si cast alloys using Al-10% Ti and Al-4% B master alloys ». Materials. vol. 16 , nº 7.

Agnes M. Samuel, Ehab Samuel, Victor Songmene, Fawzy H. Samuel. 2023. « A review on porosity formation in aluminum-based alloys ». Materials. vol. 16 , nº 5.

Ehab Samuel, Agnes M. Samuel, Victor Songmene, Fawzy H. Samuel. 2023. « A review on the analysis of thermal and thermodynamic aspects of grain refinement of aluminum-silicon-based alloys ». Materials. vol. 16 , nº 16.

Ali Tahmasbi, Agnes M. Samuel, Yasser Zedan, Victor Songmene, Fawzy H. Samuel. 2023. « Effect of aging treatment on the strength and microstructure of 7075-based alloys containing 2% Li and/or 0.12% Sc ». Materials. vol. 16 , nº 23.

Helene Bechara, Arezki Merkhouf, Ryad Zemouri, Bachir Kedjar, Kamal Al Haddad, Antoine Tahan. 2023. « Field winding short circuit fault signature analysis in stray flux of large hydrogenerator ». 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023) p. 78-83. Institute of Electrical and Electronics Engineers.

Sabrine Ben Amor, Floriane Zongo, Ameni Eltaief, Aymen Maatki, Borhen Louhichi, Antoine Tahan. 2023. « A new method to select optimal part building orientation for additive manufacturing processes based on geometric complexity and heat shrinkage ». Progress in Additive Manufacturing. vol. 8 , nº 2. p. 211-222.

Antoine Chrétien, Antoine Tahan, Philippe Cambron, Adaiton Oliveira-Filho. 2023. « Operational wind turbine blade damage evaluation based on 10-min SCADA and 1 Hz Data ». Energies. vol. 16 , nº 7.

Q. Dollon, A. Tahan, J. Antoni, M. Gagnon, C. Monette. 2023. « Toward a better understanding of synchronous vibrations in hydroelectric turbines ». Journal of Sound and Vibration. vol. 544

Rony Ibrahim, Antoine Tahan, Bachir Kedjar, Kamal Al-Haddad, Ryad Zemouri, Arezki Merkhouf. 2023. « Vibroacoustic signal-based diagnosis for rotor faults in large synchronous machines - an overview ». 6th International Conference on Renewable Energy for Developing Countries (REDEC) (Zouk Mosbeh, Lebanon, July 05-07, 2023) p. 72-77. IEEE.

Rony Ibrahim, Ryad Zemouri, Bachir Kedjar, Antoine Tahan, Arezki Merkhouf, Kamal Al-Haddad. 2023. « Rotor fault diagnosis in a hydrogenerator based on the stator vibration and the variational autoencoder ». IEEE International Electric Machines and Drives Conference, IEMDC (San Francisco, CA, USA, May 15-18, 2023) Institute of Electrical and Electronics Engineers.

Sagar Jose, Khanh T. P. Nguyen, Kamal Medjaher, Ryad Zemouri, Mélanie Lévesque, Antoine Tahan. 2023. « Fault detection and diagnostics in the context of sparse multimodal data and expert knowledge assistance: Application to hydrogenerators ». Computers in Industry. vol. 151

Adaiton Oliveira-Filho, Ryad Zemouri, Philippe Cambron, Antoine Tahan. 2023. « Early detection and diagnosis of wind turbine abnormal conditions using an interpretable supervised variational autoencoder model ». Energies. vol. 16 , nº 12.

Antoine Proteau, Antoine Tahan, Ryad Zemouri, Marc Thomas. 2023. « Predicting the quality of a machined workpiece with a variational autoencoder approach ». Journal of Intelligent Manufacturing. vol. 34 , nº 2. 19 p. p. 719-737.

M. Tlija, A. Korbi, B. Louhichi, A. Tahan. 2023. « A computer-aided design-based tolerance analysis of assemblies with form defects and deformations of nonrigid parts ». Journal of Computing and Information Science in Engineering. vol. 23 , nº 2.

Ryad Zemouri, Rony Ibrahim, Antoine Tahan. 2023. « Hydrogenerator early fault detection: Sparse Dictionary Learning jointly with the Variational Autoencoder ». Engineering Applications of Artificial Intelligence. vol. 120

Mohammad E. Bajgholi, Gilles Rousseau, Edward Ginzel, Denis Thibault, Martin Viens. 2023. « Total focusing method applied to probability of detection ». International Journal of Advanced Manufacturing Technology. vol. 126 , nº 7-8. p. 3637-3647.

Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2023. « Advanced ultrasonic inspection methodologies for fitness-for-service (F.F.S) assessment of hydraulic turbines ». International Journal of Advanced Manufacturing Technology. vol. 129 , nº 5-6. p. 2621-2633.

Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault, Martin Gagnon. 2023. « Reliability assessment of non-destructive testing (NDT) for the inspection of weld joints in the hydroelectric turbine industry ». International Journal of Advanced Manufacturing Technology. vol. 128 , nº 9-10. p. 4223-4233.

A. Amjadian, J-F. Chatelain, D. Shariari. 2022. « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET ( Vancouver, BC, Canada, Feb. 24-25, 2022 )

Amir Amjadian, Jean-François Chatelain, Davood Shahriari. 2022. « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Journal of Advanced Research in Engineering & Technology. vol. 6 , nº 1. p. 1-5.

Mustapha Arslane, Mohamed Slamani, Belkacem Aoufi, Jean-François Chatelain. 2022. « Locator placement optimization during machining turbine blades using genetic algorithm ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022) p. 1169-1173.

Madani Grine, Mohamed Slamani, Mustapha Arslane, Jean-François Chatelain. 2022. « Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022) p. 2023-2028.

Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022. « Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ». International Journal of Advanced Manufacturing Technology. vol. 121 , nº 11-12. p. 8127-8142.

Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022. « Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ». Journal of Manufacturing and Materials Processing. vol. 6 , nº 5.

Ronan Mathieu, Mohamed Ali Charfi, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Roger Serra, Gilbert Lebrun. 2022. « Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ». International Journal of Advanced Manufacturing Technology. vol. 122 , nº 9-10. p. 3969-3981.

Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, Jean-François Chatelain. 2022. « A comparative evaluation of the performance of three CNC machine tools ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022) p. 686-691.

Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, René Mayer, Jean-François Chatelain. 2022. « Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ». International Journal of Advanced Manufacturing Technology. vol. 120 p. 5093-5115.

M. Slamani, H. Chafai, J. F. Chatelain. 2022. « Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite ». Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering. (Sous presse)

R. Côté, S. Ancé, S. Charlon, J. Soulestin, V. Demers, N. Demarquette. 2022. « Impact of the process parameters on printing pressure experienced in material extrusion additive manufacturing of highly-filled polymer (MEAM-HP) ». Communication lors de la conférence : 37th International Conference of the Polymer Processing Society (PPS-37) ( Fukuoka, Japan, Apr. 11-15, 2022 )

David Langlais, Vincent Demers, Vladimir Brailovski. 2022. « Rheology of dry powders and metal injection molding feedstocks formulated on their base ». Powder Technology. vol. 396 , nº Part A. p. 13-26.

Seyed Mohammad Majdi, Atefeh Ayatollahi Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2022. « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy. vol. 65 , nº 2. p. 170-180.

Olivier Miclette, Raphaël Côté, Vincent Demers, Vladimir Brailovski. 2022. « Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ». Additive Manufacturing. vol. 60

Mohammad Saleh Meiabadi, Mahmoud Moradi, Afshin Kazerooni, Vincent Demers. 2022. « Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology ». International Journal of Materials and Product Technology. vol. 64 , nº 2. p. 140-155.

Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2022. « Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ». Heat Transfer Engineering. vol. 43 , nº 12. p. 1041-1064.

Riadh Azzaz, Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022. « Slag characterization regarding refractory wear in EAF steelmaking route ». Affiche présentée lors de la conférence : 61st Annual Conference of Metallurgists (COM) ( Montreal, QC, Canada, Aug. 21-24, 2022 )

Zhang Chunping, Abdelhalim Loucif, Mohammad Jahazi, Jean Benoit Morin. 2022. « FEM simulation of the effect of mold initial temperature on carbon macrosegregation in large-size steel ingots ». Materials Science Forum. 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap (Kyoto, Japan - En ligne, Oct. 14-17, 2021) p. 258-263. Trans Tech Publications.

Simin Dourandish, Henri Champliaud, Jean -Benoit Morin, Mohammad Jahazi. 2022. « Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ». International Journal of Advanced Manufacturing Technology. vol. 123 , nº 7-8. p. 2833-2851.

L. Ebacher, M. Jahazi, J. B. Morin, B. Ritchey. 2022. « Thermomechanical study of H13 hot forged bars ». 4th International Ingot Casting Rolling Forging, ICRF 2022 - Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022) p. 26-37. Association for Iron and Steel Technology, AISTECH.

Adriana Eres-Castellanos, Muftah Zorgani, Davood Shahriari, Radu Romanica, Jose Antonio Jimenez, Carlos Garcia-Mateo, Mohammad Jahazi. 2022. « Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel ». Journal of Materials Research and Technology. vol. 18 p. 3428-3442.

Eslam M. Fayed, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2022. « Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ». Materials Science and Engineering A. vol. 838 16 p.

B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2022. « Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ». Metals and Materials International. vol. 28 , nº 2. p. 487-502.

Neda Ghodrati, Mounir Baiteche, Abdelhalim Loucif, Paloma Isabel Gallego, Morin Jean-Benoit, Mohammad Jahazi. 2022. « Influence of hot top height on macrosegregation and material yield in a large-size cast steel ingot using modeling and experimental validation ». Metals. vol. 12 , nº 11.

Neda Ghodrati, Abdelhalim Loucif, Jean -Benoit Morin, Mohammad Jahazi. 2022. « Modeling of the influence of hot top design on microporosity and shrinkage cavity in large-size cast steel ingots ». 8th International Congress on the Science and Technology of Steelmaking (Montreal, QC, Canada, Aug. 02-04, 2022) p. 239-244. Association for Iron & Steel Technology.

Manel Houria, Nedjoua Matougui, Brahim Mehdi, Nabil Kherrouba, Mohammad Jahazi. 2022. « Effect of plastic anisotropy on the kinetics of static softening in AA2024-T3 aluminum alloy ». Metals and Materials International. vol. 28 p. 2042-2058.

Kianoosh Kaveh, Jean-Benoit Morin, Mohammad Jahazi, Elmira Moosavi-Khoonsari. 2022. « Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking ». 8th International Congress on the Science and Technology of Steelmaking (ICS) (Montreal, QC, Canada, Aug. 02-04, 2022) p. 199-206. Association for Iron & Steel Technology.

M. Kavyani, G. R. Ebrahimi, H. R. Ezatpour, M. Jahazi. 2022. « Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ». Journal of Magnesium and Alloys. vol. 10 , nº 6. p. 1640-1662.

Abdelhalim Loucif, Zhang Chunping, Jean-Benoît Morin, Mohammad Jahazi. 2022. « A FEM analysis on the influence of manganese on carbon and chromium macrosegregation in large size steel ingot ». 10th International Conference on Material Science and Engineering Technology (ICMSET 2021)), the 5th International Conference on Building Materials and Materials Engineering (ICBMM 2021), and the 6th International Conference on Materials Technology and Ap p. 252-257. Trans Tech Publications.

Mohammad Maroufkhani, Alireza Khodabandeh, Iulian Radu, Mohammad Jahazi. 2022. « Pitting corrosion resistance of the 316L stainless steel welds: influenced of oxygen content in the protective gas ». Canadian Society for Mechanical Engineering International Congress (Alberta, AB, Canada, 7-8 juin 2022) Canadian Society for Mechanical Engineering (CSME).

Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2022. « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology. vol. 36 , nº 3. p. 221-239.

Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2022. « A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ». International Journal of Advanced Manufacturing Technology. vol. 121 , nº 5-6. p. 3977-3987.

Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas. 2022. « Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel ». Materials Characterization. vol. 192

Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2022. « Dissimilar linear friction welding of selective laser melted Inconel 718 to forged Ni-based superalloy AD730: Evolution of strengthening phases ». Journal of Materials Science and Technology. vol. 96 p. 248-261.

Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. 2022. « Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ». Journal of Materials Research and Technology. vol. 21 p. 3412-3424.

Ali Vedaei-Sabegh, Jean-Benoît Morin, Mohammad Jahazi. 2022. « Influence of thermally grown oxide layers thickness on temperature evolution during the forging of large size steel ingots ». Materials Chemistry and Physics. vol. 275 16 p.

Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Jean-Benoit Morin. 2022. « FE modelling and prediction of macrosegregation patterns in large size steel ingots: Influence of filling rate ». Metals. vol. 12 , nº 1.

Elhocine Derardja, Arash Rafiei, Elmira Moosavi-Khoonsari. 2022. « Development of a smart database for wastes from the Canadian mining and metallurgical industry ». 61st Annual Conference of Metallurgists (COM) (Montreal, QC, Canada, Aug. 21-24, 2022) Canadian Institute of Mining, Metallurgy and Petroleum.

Yan Ma, Elmira Moosavi-Khoonsari, Håkon A. Hartvedt Olsen Myklebust, Gabriella Tranell. 2022. « Oxidation and fume formation from liquid silicomanganese alloys exposed to atmospheres containing moisture ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 53 , nº 4. p. 2618-2633.

Elmira Moosavi-Khoonsari, Sina Mostaghel, Andreas Siegmund, Jean-Pierre Cloutier. 2022. « A review on pyrometallurgical extraction of antimony from primary resources: Current practices and evolving processes ». Processes. vol. 10 , nº 8.

Elmira Moosavi-Khoonsari, Arash Rafiei. 2022. « Development of a smart database for solid mine wastes contributing to circular economy of mining sector ». CIMBC 2022 - CIM Annual Convention (Vancouver, BC, Canada, May 01-04, 2022) Canadian Institute of Mining, Metallurgy and Petroleum.

Elmira Moosavi-Khoonsari, Marie-Aline Van Ende, In-Ho Jung. 2022. « Kinetic simulation of hot metal pretreatment: desulfurization using powder injection ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 53 p. 981-998.

Osiris Canciglieri Junior, Frédéric Noël, Louis Rivest, Abdelaziz Bouras. 2022. « Product lifecycle management. Green and blue technologies to support smart and sustainable organizations : 18th IFIP WG 5.1 International Conference, PLM 2021, Curitiba, Brazil, July 11–14, 2021, Revised Selected Papers, Part II ». 2 Springer.

Seyedmorteza Ghaffarishahri, Louis Rivest. 2022. « A prototype of an automated feature recognition algorithm for aerospace sheet metal parts ». Computer-Aided Design and Applications. vol. 19 , nº 4. p. 624-661.

Julia Guerineau, Matthieu Bricogne, Louis Rivest, Alexandre Durupt. 2022. « Organizing the fragmented landscape of multidisciplinary product development: a mapping of approaches, processes, methods and tools from the scientific literature ». Research in Engineering Design. vol. 33 p. 307-349.

J. Montlahuc, A. Polette, A. Tahan, J. P. Pernot, L. Rivest. 2022. « Multi-source point cloud semantic segmentation using neural network ». 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III (Nice, France, June 06-11, 2022) p. 515-522. International Society for Photogrammetry and Remote Sensing.

Christian Tiaya Tedonchio, Sylvie Nadeau, Conrad Boton, Louis Rivest. 2022. « Digital mock-ups as support tools for preventing risks related to energy sources in the operation stage of industrial facilities through design ». Results in Engineering. vol. 16

Mohamed H. Abdelaziz, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022. « Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ». Materials. vol. 15 , nº 8.

Haithem Bahri, Victor Songmene, Jules Kouam. 2022. « Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ». Micromachines. vol. 13 , nº 10.

Shimaa El-Hadad, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty, Victor Songmene. 2022. « Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ». Materials. vol. 15 , nº 19.

J. Hernandez-Sandoval, Y. Zedan, V. Songmene, M. H. Abdelaziz, F. H. Samuel, G. H. Garza-Elizondo. 2022. « Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ». International journal of metalcasting. vol. 16 , nº 3. p. 1235-1251.

Jules Kouam, Victor Songmene, Ali Bahloul, Agnes M. Samuel. 2022. « Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ». Materials. vol. 15 , nº 11.

M. G. Mahmoud, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022. « Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ». International Journal of Metalcasting. vol. 16 , nº 3. p. 1164-1190.

M. G. Mahmoud, Y. Zedan, A. M. Samuel, V. Songmene, F. H. Samuel. 2022. « The use of rare earth metals in AlSiCu casting alloys ». International Journal of Metalcasting. vol. 16 , nº 2. p. 535-552.

S. Salem, M. Hamed, Y. Zedan, A. M. Samuel, H. W. Doty, V. Songmene, F. H. Samuel. 2022. « Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ». International Journal of Metalcasting. vol. 16 , nº 3. p. 1488-1506.

A. M. Samuel, Y. Zedan, H. W. Doty, V. Songmene, F. H. Samuel. 2022. « Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ». International Journal of Metalcasting. vol. 16 , nº 2. p. 553-572.

Ehab Samuel, Ahmed M. Nabawy, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022. « Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ». Materials. vol. 15 , nº 13.

Mahmoud Alipour Sougavabar, Seyed Ali Niknam, Behnam Davoodi, Victor Songmene. 2022. « Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ». Materials. vol. 15 , nº 4.

Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022. « A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ». Materials. vol. 15 , nº 9.

Zakaria Ahmed M. Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene. 2022. « Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ». Processes. vol. 10 , nº 11.

Y. Zedan, V. Songmene, A. M. Samuel, F. H. Samuel, H. W. Doty. 2022. « Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ». International Journal of Metalcasting. vol. 16 , nº 4. p. 1915-1931.

Yasser Zedan, Guillermo H. Garza-Elizondo, Mahmoud Tash, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy Hosny Samuel. 2022. « Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ». Materials. vol. 15 , nº 3.

Yasser Zedan, Agnes M. Samuel, Herbert W. Doty, Victor Songmene, Fawzy H. Samuel. 2022. « Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ». Materials. vol. 15 , nº 1.

Yasser Zedan, Victor Songmene, Agnes M. Samuel, Fawzy H. Samuel, Herbert W. Doty. 2022. « Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ». Materials. vol. 15 , nº 9.

Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Antoine Tahan, Vladimir Brailovski. 2022. « Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ». 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022) American Society of Mechanical Engineers.

H. Bechara, R. Zemouri, A. Tahan, B. Kedjar, A. Merkhouf, K. Al-haddad. 2022. « Non-invasive anomaly diagnosis for hydro electrical generators rotor inter-turn short-circuit detection using stray flux and the VAE ». International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022) p. 1855-1861. Piscataway, NJ, USA : IEEE.

Sabrine Ben Amor, Antoine Tahan, Borhen Louhichi. 2022. « The impact of geometric complexity on printing time and cost for additive manufacturing (AM) process ». Advances in Mechanical Engineering and Mechanics II : Selected Papers from the 5th Tunisian Congress on Mechanics, CoTuMe (En ligne, Mar. 22-24, 2021) p. 203-210. Springer Science and Business Media Deutschland GmbH.

Adaiton Moreira de Oliveira-Filho, Philippe Cambron, Antoine Tahan. 2022. « Condition monitoring of wind turbine main bearing using SCADA data and informed by the principle of energy conservation ». Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022) p. 276-282. IEEE.

Quentin Dollon, Jérôme Antoni, Antoine Tahan, Martin Gagnon, Christine Monette. 2022. « A fast collapsed Gibbs sampler for frequency domain operational modal analysis ». Mechanical Systems and Signal Processing. vol. 173

R. Ibrahim, R. Zemouri, A. Tahan, F. Lafleur, B. Kedjar, A. Merkhouf, K. Al-haddad. 2022. « Anomaly detection for large hydrogenerators using the variational autoencoder based on vibration signals ». International Conference on Electrical Machines (ICEM) (Valencia, Spain, Sept. 05-08, 2022) p. 1609-1615. Piscataway, NJ, USA : IEEE.

M. Nassar, L. Guizani, M. J. Nollet, A. Tahan. 2022. « Seismic reliability assessment of base-isolated bridges in Quebec ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil. vol. 49 , nº 2. 13 p. p. 242-254.

Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2022. « Effects of temperature, analysis and modelling uncertainties on the reliability of base-isolated bridges in Eastern Canada ». Structures. vol. 37 p. 295-304.

Quang Hung Pham, Jérôme Antoni, Antoine Tahan, Martin Gagnon, Christine Monette. 2022. « Simulation of non-Gaussian stochastic processes with prescribed rainflow cycle count using short-time Fourier transform ». Probabilistic Engineering Mechanics. vol. 68

Quang Hung Pham, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2022. « Prediction of hydroelectric turbine runner strain signal via cyclostationary decomposition and kriging interpolation ». Renewable Energy. vol. 182 p. 998-1011.

Antoine Proteau, Ryad Zemouri, Antoine Tahan, Marc Thomas, Wafa Bounouara, Stéphane Agnard. 2022. « CNC machining quality prediction using variational autoencoder: A novel industrial 2 TB dataset ». Prognostics and Health Management Conference (PHM-2022 London) (London, UK, May 27-29, 2022) p. 360-367. Piscataway, NJ, USA : IEEE.

Edward Ginzel, Mohammad E. Bajgholi, Mariana Burrowes M. Guimarâes, Fabrice Foucher, Gilles Rousseau, Martin Viens. 2022. « Total focusing method used for flaw sizing in probability of detection determination ». e-Journal of Nondestructive Testing. vol. 27 , nº 7.

H. Shahmiri, M. Viens. 2022. « Nondestructive evaluation of electroplating-induced hydrogen embrittlement in cadmium-coated high-strength steel using ultrasonic surface waves ». Materials Evaluation. vol. 79 , nº 11. p. 1094-1104.

Mustapha Arslane, Mohamed Slamani, Jean-François Chatelain. 2021. « Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ». International Journal of Advanced Manufacturing Technology. vol. 114 p. 1697-1716.

Arquimedes Castillo-Morales, Xavier Rimpault, Jean-François Chatelain, Gilbert Lebrun. 2021. « Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ». Journal of Composites Science. vol. 5 , nº 5. 21 p.

Vincent Demers, Simon Lamarre, Jean-François Chatelain. 2021-02-16. « Low-pressure powder injection molding machine, kit and method ».

Mohamed Slamani, Jean-Francois Chatelain, Alexandre Il, Marek Balazinski. 2021. « Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ». Physica A: Statistical Mechanics and its Applications. vol. 570 20 p.

Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain, Yves Beauchamp. 2021. « Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ». International Journal of Material Forming. vol. 14 , nº 6. p. 1497-1510.

Mohamed Slamani, Nouha Karabibene, Jean-Francois Chatelain, Xavier Rimpault, Yves Beauchamp. 2021. « Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ». Measurement: Journal of the International Measurement Confederation. vol. 184 16 p.

K. Xing, X. Rimpault, J. R. R. Mayer, J. F. Chatelain, S. Achiche. 2021. « Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ». 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021) p. 43-52. euspen.

Mohamed Azzouni, Vincent Demers, Louis Dufresne. 2021. « Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ». International Journal of Material Forming. vol. 14 , nº 5. p. 961-972.

Raphaël Côté, Mohamed Azzouni, Vincent Demers. 2021. « Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding ». Powder Technology. vol. 381 p. 255-268.

Raphaël Côté, Mohamed Azzouni, Oussema Ghanmi, Sarthak Kapoor, Vincent Demers. 2021. « Impact of rheological model on numerical simulation of low-pressure powder injection moulding ». Powder Metallurgy. vol. 64 , nº 1. p. 8-16.

Vincent Demers. 2021. « Review of low-pressure powder injection molding process ». Proceedings of the 2021 International Conference on Powder Metallurgy & Particulate Materials (PowderMet2021) (Orlando, FL, USA, June 20-23, 2021) Metal Powder Industries Federation.

O. Ghanmi, V. Demers. 2021. « Molding properties of titanium-based feedstock used in low-pressure powder injection molding ». Powder Technology. vol. 379 p. 515-525.

Mahmoud Moradi, Mohammad Saleh Meiabadi, Vincent Demers. 2021. « A numerical investigation of friction stir welding parameters in joining dissimilar aluminium alloys using finite element method ». International Journal of Manufacturing Research. vol. 16 , nº 1. p. 32-51.

Atefeh A. Tafti, Vincent Demers, Seyed M. Majdi, Guillem Vachon, Vladimir Brailovski. 2021. « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals. vol. 11 , nº 2. 14 p.

Atefeh A. Tafti, Vincent Demers, Guillem Vachon, Vladimir Brailovski. 2021. « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering. vol. 143 , nº 3.

Y. Zedan, M. Iben Houria, N. Vanderesse, F. Atmani, F. Mirakhorli, F. Nadeau, V. Demers, P. Bocher. 2021. « Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ». International Journal of Fatigue. vol. 147 13 p.

Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Jean-Benoît Morin, Mohammad Jahazi. 2021. « Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ». International Journal of Advanced Manufacturing Technology. vol. 113 , nº 9-10. p. 2447-2460.

Yassine Bouissa, Muftah Zorgani, Davood Shahriari, Henri Champliaud, Jean-Benoît Morin, Mohammad Jahazi. 2021. « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 52 , nº 5. p. 1883-1900.

K. Chadha, C. Aranas, M. Jahazi. 2021. « Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ». Metals and Materials International. vol. 27 , nº 11. p. 4307-4321.

S. Dourandish, M. Jahazi, G. R. Ebrahimi, L. Ebacher. 2021. « Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ». Journal of Materials Research and Technology. vol. 13 p. 260-270.

Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2021. « Phased array probe for the inspection of large steel forgings ». Cogent Engineering. vol. 8 , nº 1.

Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Carlos Garcia-Mateo. 2021. « Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ». Materials & Design. vol. 197 15 p.

Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021. « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports. vol. 11 , nº 1. 17 p.

Eslam M. Fayed, Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2021. « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals. vol. 11 , nº 1. 25 p.

B. V. Feujofack Kemda, N. Barka, M. Jahazi, D. Osmani. 2021. « Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ». Metals and Materials International. vol. 27 , nº 5. p. 1205-1223.

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021. « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology. vol. 25 , nº 6. p. 957-983.

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021. « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) p. 17-20. Elsevier.

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2021. « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials. vol. 14 , nº 15.

Makarim Khan, Davood Shahriari, Mohammad Jahazi, Jean-Benoit Morin. 2021. « Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel ». Frontiers in Mechanical Engineering. vol. 7 14 p.

J. H. Liu, N. Binot, D. Delagnes, M. Jahazi. 2021. « Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ». Journal of Materials Research and Technology. vol. 12 p. 234-242.

Abdelhalim Loucif, Jean Benoit Morin, Louis Philippe Lapierre-Boire, Mohammad Jahazi. 2021. « Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ». 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020) p. 29-34. Trans Tech Publications Ltd.

Roghayeh Nikbakht, Mohammad Saadati, Taek-Soo Kim, Mohammad Jahazi, Hyoung Seop Kim, Bertrand Jodoin. 2021. « Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ». Surface & Coatings Technology. vol. 425 13 p.

Seyedmohammad Tabaie, Farhad Rezai-Aria, Bertrand C. D. Flipo, Jonathan Cormier, Mohammad Jahazi. 2021. « Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 52 , nº 8. p. 3475-3488.

Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C. D. Flipo, Mohammad Jahazi. 2021. « Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ». Materials Characterization. vol. 171

M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021. « Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ». Materials Characterization. vol. 176

M. Zorgani, C. Garcia-Mateo, M. Jahazi. 2021. « Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ». Materials and Design. vol. 210 12 p.

Frank N. H. Schrama, Elisabeth M. Beunder, Sourav K. Panda, Hessel-Jan Visser, Elmira Moosavi-Khoonsari, Adam Hunt, Jilt Sietsma, Rob Boom, Yongxiang Yang. 2021. « Optimal hot metal desulphurisation slag considering iron loss and sulphur removal capacity part II: Evaluation ». Ironmaking and Steelmaking. vol. 48 , nº 1. p. 14-24.

Frank N. H. Schrama, Elisabeth M. Beunder, Sourav K. Panda, Hessel-Jan Visser, Elmira Moosavi-Khoonsari, Jilt Sietsma, Rob Boom, Yongxiang Yang. 2021. « Optimal hot metal desulphurisation slag considering iron loss and sulphur removal capacity part I: Fundamentals ». Ironmaking and Steelmaking. vol. 48 , nº 1. p. 1-13.

Frank N. H. Schrama, Elisabeth M. Beunder, Sourav Kumar Panda, Elmira Moosavi-Khoonsari, Rob Boom, Jilt Sietsma, Yongxiang Yang. 2021. « How to design hot metal desulphurisation slag with a high sulphur capacity and low iron entrapment? ». Communication lors de la conférence : 11th International Conference on Molten Slags, Fluxes and Salts (Molten) ( Seoul, Korea, Feb. 21-25, 2021 )

Tiantian Yin, Jaesung Lee, Elmira Moosavi-Khoonsari, In-Ho Jung. 2021. « Critical evaluation and the thermodynamic optimization of the Sn-O system ». Ceramics International. vol. 47 , nº 20. p. 29267-29276.

Conrad Boton, Louis Rivest, Oussama Ghnaya, Moataz Chouchen. 2021. « What is at the Root of Construction 4.0: A systematic review of the recent research effort ». Archives of Computational Methods in Engineering. vol. 28 , nº 4. p. 2331-2350.

Mario Bourgault, Robert Pellerin, Conrad Boton, Ivanka Iordanova, Louis Rivest, Christophe Danjou, Nathalie Perrier, Daniel Forgues, Erik Poirier, Laurent Joblot. 2021. « Transformer le secteur de la construction par le numérique : Un chantier ambitieux et nécessaire ». In Le Québec économique 9 : Perspectives et défis de la transformation numérique . p. 433-456. Cirano.

Bruno Cognet, Jean-Philippe Pernot, Louis Rivest, Christophe Danjou. 2021. « Digital maturity models: Comparing manual and semi-automatic similarity assessment frameworks ». International Journal of Product Lifecycle Management. vol. 13 , nº 4. p. 291-316.

Alexandre Macloud, Ali Zeighami, Rachid Aissaoui, Louis Rivest. 2021. « Extracting grasping cues from pistol-shaped tools for digital human models ». Computer-Aided Design and Applications. vol. 18 , nº 6. p. 1167-1185.

Christian Tiaya Tedonchio, Sylvie Nadeau, Conrad Boton, Louis Rivest. 2021. « BIM and PLM-based management of occupational health and safety: A comparative literature review ». Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021) p. 892-901.

Haithem Bahri, Victor Songmene, Jules Kouam, Agnes Marie Samuel, Fawzy Hosny Samuel. 2021. « CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ». Materials. vol. 14 , nº 21.

Tarek Elgnemi, Victor Songmene, Jules Kouam, Martin B. G. Jun, Agnes Marie Samuel. 2021. « Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ». Materials. vol. 14 , nº 19.

Tarek-Shaban-Mohamed Elgnemi, Martin Byung-Guk Jun, Victor Songmene, Agnes Marie Samuel. 2021. « Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ». Materials. vol. 14 , nº 8.

Mohsen Marani, Mohammadjavad Zeinali, Victor Songmene, Chris K. Mechefske. 2021. « Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ». Measurement: Journal of the International Measurement Confederation. vol. 177 p. 704-713.

Alliche Mohamed-Amine, Djennane Mohamed, Djebara Abdelhakim, Victor Songmene. 2021. « Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ». Materials. vol. 14 , nº 24.

Oluwole Olufayo, Victor Songmene, Jean-Pierre Kenné, Michael Ayomoh. 2021. « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research. vol. 59 , nº 17. p. 5352-5371.

Agnes Samuel, Yasser Zedan, Herbert Doty, Victor Songmene, Fawzy H. Samuel. 2021. « A review study on the main sources of porosity in Al-Si cast alloys ». Advances in Materials Science and Engineering. vol. 2021 16 p.

Dinh Son Tran, Victor Songmene, Anh Dung Ngo. 2021. « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications. vol. 33 p. 11721-11738.

Yasser Zedan, Keyhan Jabbari, Seyed A. Niknam, Victor Songmene. 2021. « Machinability study of AA6061 under various heat treatment conditions ». Iranian Journal of Science and Technology - Transactions of Mechanical Engineering. vol. 45 p. 543-553.

Sabrine Ben Amor, Floriane Zongo, Borhen Louhichi, Vladimir Brailovski, Antoine Tahan. 2021. « Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ». 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021) American Society of Mechanical Engineers (ASME).

Q. Chatenet, E. Remy, M. Gagnon, M. Fouladirad, A. S. Tahan. 2021. « Modeling cavitation erosion using non-homogeneous gamma process ». Reliability Engineering and System Safety. vol. 213 11 p.

Quentin Chatenet, Antoine S. Tahan, Mitra Fouladirad, Martin Gagnon, Emmanuel Remy. 2021. « Maintenance strategies comparison for francis turbine runner subjected to cavitation ». Sustainability. vol. 13 , nº 19.

B. Danouj, S. A. Tahan, E. David, M. Lotfi. 2021. « Partial discharges location in power transformers using piezoceramic sensors ». International Journal of Electrical and Computer Engineering. vol. 11 , nº 3. p. 1942-1950.

Q. Dollon, J. Antoni, A. Tahan, M. Gagnon, C. Monette. 2021. « Operational Modal Analysis of hydroelectric turbines using an order based likelihood approach ». Renewable Energy. vol. 165 p. 799-811.

Q. Dollon, C. Monette, M. Gagnon, A. Tahan, J. Antoni. 2021. « Calibration of critical speed predictions using experimental measurements ». 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) UK : IOP Publishing.

Quang Hung Pham, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2021. « Rainflow-counting matrix interpolation over different operating conditions for hydroelectric turbine fatigue assessment ». Renewable Energy. vol. 172 p. 465-476.

Pham Quang Hung, Martin Gagnon, Jérôme Antoni, Antoine Tahan, Christine Monette. 2021. « A proposal for the dynamic strain interpolation on hydroelectric turbine runner ». 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) UK : IOP Publishing.

Mondher Souilah, Antoine Tahan, Nabil Abacha. 2021. « A small displacement torsor model to evaluate machining accuracy in the presence of locating and machine geometric errors ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021 (Charlottetown, PE, Canada, June 27-30, 2021)

Mohammad Ebrahim Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2021. « Capability of advanced ultrasonic inspection technologies for hydraulic turbine runners ». Applied Sciences. vol. 11 , nº 10. 15 p.

Mohamed Ali Charfi, Ronan Mathieu, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Gilbert Lebrun. 2020. « Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ». Journal of Composites Science. vol. 4 , nº 4.

Maryam Jamshidi, Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2020. « Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ». International Journal of Advanced Manufacturing Technology. vol. 106 , nº 9-10. p. 3859-3868.

Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp, Philippe Bocher, Nicolas Vanderesse. 2020. « A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ». Journal of Composites Science. vol. 4 , nº 2.

Yousef Saadati, Gilbert Lebrun, Christophe Bouvet, Jean-François Chatelain, Yves Beauchamp. 2020. « Study of translaminar fracture toughness of unidirectional flax/epoxy composite ». Composites Part C: Open Access. vol. 1

Yousef Saadati, Gilbert Lebrun, Jean-François Chatelain, Yves Beauchamp. 2020. « Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ». Journal of Composite Materials. vol. 54 , nº 20. p. 2781-2801.

Mohamed Slamani, Jean-François Chatelain. 2020. « Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ». Measurement: Journal of the International Measurement Confederation. vol. 152

Ghalya Ali, Vincent Demers, Raphaël Côté, Nicole R. Demarquette. 2020. « Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ». Materials Performance and Characterization. vol. 9 , nº 4. 14 p.

Mohamed Aziz Ben Trad, Vincent Demers, Raphaël Côté, Mehran Sardarian, Louis Dufresne. 2020. « Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock ». Advanced Powder Technology. vol. 31 , nº 3. p. 1349-1358.

M. Zaid Ahmed, K. Chadha, S. R. Reddy, D. Shahriari, P. P. Bhattacharjee, M. Jahazi. 2020. « Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 51 , nº 12. p. 6406-6420.

Alireza Aleyari, Omid Majidi, Nicolas Bombardier, Xuan-Tan Pham, Mohammad Jahazi. 2020. « Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ». Journal of Manufacturing Processes. vol. 49 p. 10-17.

Frédéric Bédard, Mohammad Jahazi, Victor Songmene. 2020. « Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ». International Journal of Advanced Manufacturing Technology. vol. 107 , nº 1-2. p. 333-342.

Y. Bouissa, N. Bohlooli, D. Shahriari, H. Champliaud, J. B. Morin, M. Jahazi. 2020. « FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ». Journal of Manufacturing Processes. vol. 58 p. 592-605.

Thiago Bruno Carneiro, Samuel Filgueiras Rodrigues, Clodualdo Aranas, Fulvio Siciliano, Eden Santos Silva, Gedeon Silva Reis, Edson Jansen Pedrosa Miranda, Valdemar Silva Leal, Mohammad Jahazi, John Joseph Jonas. 2020. « Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ». Journal of Materials Research and Technology. vol. 9 , nº 5. p. 10254-10264.

K. Chadha, C. Aranas, D. Shahriari, M. Jahazi, J. G. Spray. 2020. « The effect of retained work hardening on the driving force for dynamic transformation ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 51 , nº 11. p. 5617-5622.

Oussama Chaieb, Oluwole A. Olufayo, Victor Songmene, Mohammad Jahazi. 2020. « Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ». Materials. vol. 13 , nº 15. 21 p.

A. Chamanfar, S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire. 2020. « Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ». Journal of Materials Research and Technology. vol. 9 , nº 6. p. 12102-12114.

M. Chegini, M. R. Aboutalebi, S. H. Seyedein, G. R. Ebrahimi, M. Jahazi. 2020. « Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ». Journal of Manufacturing Processes. vol. 56 p. 916-927.

Eslam M. Fayed, Davood Shahriari, Mohammad Saadati, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2020. « Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ». Materials. vol. 13 , nº 11. 23 p.

B. V. Feujofack Kemda, Noureddine Barka, M. Jahazi, D. Osmani. 2020. « Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ». International Journal of Advanced Manufacturing Technology. vol. 106 , nº 5-6. 15 p. p. 2477-2491.

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020. « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL ( En ligne, Nov. 05-06, 2020 )

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020. « Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ». The International Journal of Advanced Manufacturing Technology. vol. 110 , nº 9. p. 2669-2683.

Mahshad Javidikia, Morteza Sadeghifar, Victor Songmene, Mohammad Jahazi. 2020. « On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ». International Journal of Advanced Manufacturing Technology. vol. 106 , nº 9-10. p. 4547–4565.

Abdelhalim Loucif, Chunping Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2020. « Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ». 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019) p. 82-86. Trans Tech Publications Ltd.

Hossein Monajati, Mariem Zoghlami, Amevi Tongne, Mohammad Jahazi. 2020. « Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ». Metals. vol. 10 , nº 9.

Morteza Sadeghifar, Mahshad Javidikia, Victor Songmene, Mohammad Jahazi. 2020. « Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ». Simulation Modelling Practice and Theory. vol. 104 18 p.

Ahad Shafiee, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim, Mohammad Jahazi. 2020. « Development and microstructural characterization of a new wrought high entropy superalloy ». Metals and Materials International. vol. 26 , nº 5. p. 591-602.

S. Tabaie, F. Rézaï-Aria, M. Jahazi. 2020. « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists ( Toronto, ON, Canada, Aug. 24-27, 2020 )

Seyedmohammad Tabaie, Farhad Rézaï-Aria, Mohammad Jahazi. 2020. « Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ». Metals. vol. 10 , nº 5. 20 p.

Ali Vedaei-Sabegh, Jean-Benoit Morin, Mohammad Jahazi. 2020. « Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ». Steel Research International. vol. 91 , nº 4.

C. Zhang, M. Jahazi, R. Tremblay. 2020. « Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ». International Journal of Advanced Manufacturing Technology. vol. 107 , nº 1-2. p. 167-175.

Chunping Zhang, Mohammad Jahazi, Paloma Isabel Gallego. 2020. « On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ». Metals. vol. 10 , nº 1. 17 p.

M. Zorgani, Carlos Garcia-Mateo, M. Jahazi. 2020. « The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ». Journal of Materials Research and Technology. vol. 9 , nº 4. p. 7762-7776.

James A. Small, Corrie J. G. van Hoek, Katrin Schollbach, Elmira Moosavi-Khoonsari, Frank J. L. van der Does, Stefan Melzer, Tako P. R. de Jong, Tilly de Bie, Rob A. Versfeld, Michiel de Roo, Sieger R. van der Laan. 2020. « A method for analysis of nuisance dust from integrated steel works: chemical and mineralogical characteristics of contributing sources ». Environmental Sciences Europe. vol. 32 , nº 1. 30 p.

Olivier Champagne, Xuan-Tan Pham. 2020. « Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ». International Journal of Heat and Mass Transfer. vol. 154 8 p.

Dinh-Dong Dang, Xuan-Tan Pham, Chi-Cong Nguyen. 2020. « Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ». Journal of Thermal Science and Engineering Applications. vol. 29 , nº 1. p. 206-218.

Seyedmorteza Ghaffarishahri, Louis Rivest. 2020. « Feature recognition for structural aerospace sheet metal parts ». Computer-Aided Design and Applications. vol. 17 , nº 1. p. 16-43.

Seyedmorteza Ghaffarishahri, Louis Rivest. 2020. « Feature-based model difference identification for aerospace sheet metal parts ». Computer-Aided Design and Applications. vol. 18 , nº 3. p. 443-467.

Hamidreza Pourzarei, Louis Rivest, Conrad Boton. 2020. « Cross-Pollination as a comparative analysis approach to comparing BIM and PLM: A literature review ». Product Lifecycle Management Enabling Smart X : 17th IFIP WG 5.1 International Conference, PLM 2020, Rapperswil, Switzerland, July 5–8, 2020, Revised Selected Papers (Rapperswil, Switzerland, July 05-08, 2020) p. 724-737. Springer.

Augias Anagonou, Thierry Godjo, Victor Songmene, Yvette Tankpinou. 2020. « Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ». Déchets Sciences et Techniques. p. 39-48.

Augias Anagonou, Victor Songmene, Thierry Godjo, Jules Kouam. 2020. « Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ». International Journal of Advanced Research and Publications. vol. 4 , nº 2. p. 96-106.

Mohsen Marani, Victor Songmene, Mohammadjavad Zeinali, Jules Kouam, Yasser Zedan. 2020. « Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ». Neural Computing and Applications. vol. 32 p. 8115-8126.

Mohsen Marani, Mohammadjavad Zeinali, Jules Kouam, Victor Songmene, Chris K. Mechefske. 2020. « Prediction of cutting tool wear during a turning process using artificial intelligence techniques ». International Journal of Advanced Manufacturing Technology. vol. 111 , nº 1-2. p. 505-515.

Oluwole A. Olufayo, Mouhamed Dhafer Boulaares, Victor Songmene. 2020. « Machining/machinability of Rene 65 superalloy for aerospace applications ». IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) Piscataway, NJ, USA : IEEE.

Mohamed Nejib Saidi, Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2020. « Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ». Aerosol Science and Engineering. vol. 4 , nº 1. p. 9-17.

Mohamed Shnfir, J. Kouam, V. Songmene. 2020. « Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ». International Journal of Advanced Manufacturing Technology. vol. 110 , nº 3-4. p. 617-627.

V. Songmene, O. A. Olufayo. 2020. « Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ». Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020) p. 36-45. IEEE.

Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam. 2020. « Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ». International Journal of Advanced Manufacturing Technology. vol. 110 , nº 11-12. p. 3423-3444.

Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam, Arturo Rodriguez-Uribe, Manjusri Misra, Amar Kumar Mohanty. 2020. « Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ». Materials. vol. 13 , nº 5. 22 p.

Ali Yeganefar, Seyed Ali Niknam, Victor Songmene. 2020. « Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ». Transactions of the Canadian Society for Mechanical Engineering. vol. 44 , nº 3. p. 427-439.

Ali Aidibe, Souheil Antoine Tahan, Mojtaba Kamali Nejad. 2020. « Interlaboratory empirical reproducibility study based on a GD&T benchmark ». Applied Sciences. vol. 10 , nº 14. 16 p.

Kaveh Babanezhad, Ali Aidibe, Gilles Foucault, Antoine Tahan, Jean Bigeon. 2020. « Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ». Precision Engineering. vol. 65 p. 116-129.

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2020. « Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ». Journal of Risk Research. vol. 23 , nº 3. p. 297-312.

Olivier Blancke, Dragan Komljenovic, Antoine Tahan, Normand Amyot, Claude Hudon, Jean-François Boudreau, Mélanie Lévesque. 2020. « From data to asset health management in the context of hydropower generation: A holistic concept ». Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018) p. 258-266. Cham, Switzerland : Springer International Publishing.

Quentin Chatenet, Mitra Fouladirad, Emmanuel Remy, Martin Gagnon, Laurent Tôn-Thât, Antoine Tahan. 2020. « On the performance of the maximum likelihood estimation method for gamma process ». 29th European Safety and Reliability Conference (ESREL) (Hannover, Germany, Sept. 22-26, 2019) p. 943-950. Research Publishing Services.

Quentin Chatenet, Martin Gagnon, Emmanuel Remy, Mitra Fouladirad, Antoine Tahan. 2020. « Stochastic modeling of cavitation erosion in francis runner ». International Journal of Fluid Machinery and Systems. vol. 13 , nº 1. p. 21-29.

G. Kahwati, A. Tahan, A. Merkhouf, C. Hudon, K. Al-Haddad. 2020. « Reliability index for health monitoring of hydroelectric synchronous machine's insulation ». 2020 International Conference on Electrical Machines (Gothenburg, Sweden, Aug. 23-26, 2020) p. 1418-1423. New York : IEEE.

Thibaud Lamothe, Michel Blain, Martin Gagnon, Jérôme Lonchampt, Antoine Tahan. 2020. « Technico-economic modelling of maintenance cost for hydroelectric turbine runners ». Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018) p. 238-245. Cham, Switzerland : Springer International Publishing.

Antoine Proteau, Ryad Zemouri, Antoine Tahan, Marc Thomas. 2020. « Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ». International Journal of Advanced Manufacturing Technology. vol. 111 , nº 11-12. p. 3597-3611.

Ryad Zemouri, Melanie Levesque, Normand Amyot, Claude Hudon, Olivier Kokoko, Souheil Antoine Tahan. 2020. « Deep convolutional variational autoencoder as a 2D-visualization tool for partial discharge source classification in hydrogenerators ». IEEE Access. vol. 8 p. 5438-5454.

Floriane Zongo, Charles Simoneau, Anatolie Timercan, Antoine Tahan, Vladimir Brailovski. 2020. « Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ». International Journal of Advanced Manufacturing Technology. vol. 107 p. 1411-1436.

Mohammad E. Bajgholi, Gilles Rousseau, Martin Viens, Denis Thibault. 2020. « Performance of Ultrasonic Inspection on hydroelectric turbine runner ». Communication lors de la conférence : 3rd International Symposium on Structural Health Monitoring and Nondestructive Testing ( Québec, QC, Canada, Nov. 25-26, 2020 )

Ehsan Mohseni, Hamid Habibzadeh Boukani, Demartonne Ramos Franca, Martin Viens. 2020. « A study of the automated eddy current detection of cracks in steel plates ». Journal of Nondestructive Evaluation. vol. 39 , nº 1. 12 p.

Ehsan Mohseni, Demartonne Ramos Franca, Martin Viens, Wen Fang Xie, Baoguang Xu. 2020. « Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ». Journal of Nondestructive Evaluation. vol. 39 , nº 2.

Ehsan Mohseni, Martin Viens, Wen-Fang Xie. 2020. « Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ». Journal of Nondestructive Evaluation. vol. 39 , nº 1.

Konstantin Polyakov, Fernando López, Martin Viens. 2020. « Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ». The e-Journal of Nondestructive Testing. vol. 25 , nº 12. 2 p.

Jean-François Chatelain, C. M. Ouellet-Plamondon, B. Lasseur, H. Kuate-Togue. 2019. « Effect of additives on the machinability of glass fiber reinforced polymer ». In Materials Design and Applications II Coll. «Advanced Structured Materials», . p. 295-312. Springer Verlag.

Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon. 2019. « Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ». Journal of Manufacturing and Materials Processing. vol. 3 , nº 3.

Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Ronan Mathieu. 2019. « Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ». Journal of Composites Science. vol. 3 , nº 3. 16 p.

Louis-Alexandre Généreux, Gilbert Lebrun, Martin Viens, Jean-François Chatelain. 2019. « Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ». In Materials Design and Applications II Coll. «Advanced Structured Materials», . p. 341-362. Springer Verlag.

Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019. « Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ». European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12) p. 75-80. International Centre for Numerical Methods in Engineering (CIMNE).

Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019. « Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ». 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)

Mohamed Slamani, Jean-François Chatelain. 2019. « Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ». Journal of Manufacturing Processes. vol. 37 p. 177-195.

Mohamed Slamani, Jean-Francois Chatelain, Hossein Hamedanianpour. 2019. « Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ». International Journal of Material Forming. vol. 12 , nº 3. p. 331-353.

Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019. « Five-axis machine tool fault monitoring using volumetric errors fractal analysis ». CIRP Annals. vol. 68 , nº 1. 4 p. p. 555-558.

Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019. « Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ». 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019) p. 145-150. Berlin, Germany : Elsevier B.V..

Mohamed Aziz Ben Trad, Vincent Demers, Louis Dufresne. 2019. « Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ». Journal of Materials Engineering and Performance. vol. 28 , nº 9. p. 5551-5562.

V Demers. 2019. « Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ». PIM International. vol. 13 , nº 2. p. 53-63.

Vincent Demers. 2019. « Low-pressure powder injection moulding : Enabling cost-effective low and high-volume production ». Powder Injection Moulding International. vol. 13 , nº 2. p. 53-61.

Ashwaq A. Al-Hashedi, Marco Laurenti, Mohamed Amine Mezour, Tayebeh Basiri, Heithem Touazine, Mohamed Jahazi, Faleh Tamimi. 2019. « Advanced inorganic nanocomposite for decontaminating titanium dental implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials. vol. 107 , nº 3. p. 761-772.

Pierre Belanger, Mohammad Jahazi. 2019. « Friction stir welded lap joint inspection using ultrasonic guided waves ». 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 38 (Burlington, VT, USA, July 15-19, 2018) USA : AIP Publishing.

Nima Bohlooli Arkhazloo, Yassine Bouissa, Farzad Bazdidi-Tehrani, Mohammad Jadidi, Jean-Benoit Morin, Mohammad Jahazi. 2019. « Experimental and unsteady CFD analyses of the heating process of large size forgings in a gas-fired furnace ». Case Studies in Thermal Engineering. vol. 14

Yassine Bouissa, Davood Shahriari, Henri Champliaud, Mohammad Jahazi. 2019. « Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ». Case Studies in Thermal Engineering. vol. 13

K. Chadha, M. Jahazi, John G. Spray. 2019. « Effect of strain rate on the columnar to equiaxed transition in an as-cast medium-carbon low-alloy steel during hot deformation ». Materials Science and Technology (MS&T19) (Portland, OR, USA, Sept. 29-Oct. 3, 2019) p. 431-438. Materials Science and Technology.

K. Chadha, Davood Shahriari, C. Jr. Aranas, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2019. « On the role of chromium in dynamic transformation of austenite ». Metals and Materials International. vol. 25 , nº 3. p. 559-569.

Kanwal Chadha, Mohammad Jahazi. 2019-03-12. « Approche atomistique de la transformation de l’acier ». Substance ÉTS. vol.

Kanwal Chadha, Mohammad Jahazi. 2019-03-12. « Atomistic Approach in Steel Transformation ». Substance ÉTS. vol.

Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Belanger. 2019. « Live imaging using TFM in a 30-inch forged steel block ». ASNT Annual Conference 2019 (Las Vegas, NV, USA, Nov. 18-21, 2019) ASNT.

Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019. « Design and optimisation of a phased array transducer for ultrasonic inspection of large forged steel ingots ». NDT and E International. vol. 103 p. 119-129.

Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Belanger. 2019. « Influence of local mechanical parameters on ultrasonic wave propagation in large forged steel ingots ». Journal of Nondestructive Evaluation. vol. 38 , nº 3. 9 p.

G. R. Ebrahimi, A. Momeni, H. R. Ezatpour, M. Jahazi, P. Bocher. 2019. « Dynamic recrystallization in Mone1400 Ni-Cu alloy: mechanism and role of twinning ». Materials Science and Engineering : A. vol. 744 p. 376-385.

Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero, Mateo Garcia. 2019. « On the control of the scale of nanobainitic microstructures by prior austenite strengthening ». Communication lors de la conférence : European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) ( Stockholm, Sweden, Sept. 01-05, 2019 )

A. Fall, H. Monajati, A. Khodabandeh, M. H. Fesharaki, H. Champliaud, M. Jahazi. 2019. « Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ». Materials Science and Engineering: A. vol. 749 p. 166-175.

Eslam Fayed, Mamoun Medraj, Davood Shahriari, Mohammad Jahazi, Vladimir Brailovski. 2019. « Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering.

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019. « A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ». International Journal of Material Forming. vol. 12 , nº 4. p. 693-702.

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2019. « Prediction of material behavior during biaxial stretching of superplastic 5083 aluminum alloy ». The International Journal of Advanced Manufacturing Technology. vol. 102 , nº 5-8. p. 2357-2366.

F. Masoumi, D. Shahriari, H. Monajati, J. Cormier, B. C. D. Flipo, A. Devaux, M. Jahazi. 2019. « Linear friction welding of AD730TM Ni-base superalloy: process-microstructure-property interactions ». Materials and Design. vol. 183 19 p.

Oluwole A. Olufayo, Oussama Chaieb, Victor Songmene, Mohammad Jahazi. 2019. « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 ( London, ON, Canada, June 02-05, 2019 )

Samuel F. Rodrigues, Fulvio Siciliano, Clodualdo Aranas Jr., Eden S. Silva, Gedeon S. Reis, Mohammad Jahazi, John J. Jonas. 2019. « Dynamic phase transformation behavior of a Nb-microalloyed steel during roughing passes at temperatures above the Ae3 ». Metals. vol. 9 , nº 3.

Mohammad Saadati, Amir Keyvan Edalat Nobarzad, Mohammad Jahazi. 2019. « On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size ». Journal of Manufacturing Processes. vol. 41 p. 242-251.

Ahad Shafiee, Jongun Moon, Hyoung Seop Kim, Mohammad Jahazi, Mahmoud Nili-Ahmadabadi. 2019. « Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy ». Materials Science and Engineering A. vol. 749 p. 271-280.

Seyedmohammad Tabaie, Davood Shahriari, Cléa Plouze, Alexandre Devaux, Jonathan Cormier, Mohammad Jahazi. 2019. « Hot ductility behavior of AD730™ nickel-base superalloy ». Materials Science and Engineering A. vol. 766 13 p.

Heithem Touazine, Kanwal Chadha, Mohammad Jahazi, Philippe Bocher. 2019. « Characterization of subsurface microstructural alterations induced by hard turning of Inconel 718 ». Journal of Materials Engineering and Performance. vol. 28 , nº 11. p. 7016-7024.

Chunping Zhang, Abdelhalim Loucif, Rami Tremblay, Mohammad Jahazi. 2019. « Influence of non-uniform temperature distribution of the mold on solidification behavior in large-size steel ingots ». Proceedings of the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2019) (Toronto, ON, Canada, Aug. 13-15, 2019) p. 573-581. Association for Iron & Steel Technology.

Y. Ma, B. Jiang, E. Moosavi-Khoonsari, S. Andersson, E. J. Opila, G. M. Tranell. 2019. « Oxidation of liquid silicon in air atmospheres containing water vapor ». Industrial and Engineering Chemistry Research. vol. 58 , nº 16. p. 6785-6795.

Elmira Moosavi-Khoonsari, Enno Zinngrebe, Sieger R. van der Laan, Rudi Kalter, Fokko Mensonides. 2019. « Thermodynamic modeling of refractory/mould slag/steel interactions concerning slag crawling ». METEC & 4th ESTAD 2019 : European Steel technology and Application Days (Düsseldorf, Germany, June 24-28, 2019)

Enno Zinngrebe, Mary van Winjngaarden, Fokko Mensonides, Rudi Kalter, Sieger R. van der Laan, Marco Rijnders, Elmira Moosavi-Khoonsari. 2019. « Microstructures of mould slag crawling at the SEN during thin slab casting ». METEC & 4th ESTAD 2019 : European Steel technology and Application Days (Düsseldorf, Germany, June 24-28, 2019)

Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2019. « Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ». Applied Thermal Engineering. vol. 150 p. 372-385.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01. « Behavior Characterization of Large Dimension Composite Plate ». Substance ÉTS. vol.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019-05-01. « Caractérisation du comportement d’une plaque composite de grande dimension ». Substance ÉTS. vol.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent Francois, Jean-Christophe Cuillière. 2019. « Characterization of multilayered carbon-fiber-reinforced thermoplastic composites for assembly process ». Journal of Thermoplastic Composite Materials. vol. 32 , nº 5. p. 673-689.

Ngoc-Hung Vu, Xuan-Tan Pham, Vincent François, Jean-Christophe Cuillière. 2019. « Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ». Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. vol. 233 , nº 17. p. 6167-6176.

B. Cognet, J. P. Pernot, L. Rivest, C. Danjou, T. Wuest, H. Karkkainen, M. Lafleur. 2019. « Towards a novel comparison framework of digital maturity assessment models ». Product Lifecycle Management in the Digital Twin Era : 16th IFIP WG 5.1 International Conference, PLM 2019, Moscow, Russia, July 8–12, 2019, Revised Selected Papers (Moscow, Russia, July 08-12, 2019) p. 58-71. Springer.

B. Cognet, J-P. Pernot, L. Rivest, C. Danjou, T. Wuest, H. Kärkkäinen, M. Lafleur. 2019. « Towards a novel comparison framework of digital maturity assessment models ». IFIP 16th International Conference on Product Lifecycle Management (Moscow, Russia, July 08-12, 2019)

Benoit Despatis-Paquette, Louis Rivest, Robert Pellerin. 2019. « Connectivity validation for indoor IoT applications with weightless protocol ». 15th International Conference on Distributed Computing in Sensor Systems (DCOSS) - IoTI4 2019 : International Workshop on IoT Applications and Industry 4.0 (Santorini Island, Greece, May 29-31, 2019) p. 393-399. Los Alamitos, CA, USA : IEEE Computer Society.

D. Forgues, L. Rivest, C. Danjou, J. Meyer. 2019. « De l’industrie 4.0 à la construction 4.0 : des exemples concrets! ». Communication lors de la conférence : Aedifica ( Montreal, QC, Canada, 14 avril 2019 )

Daniel Forgues, Louis Rivest, Christophe Danjou, Julien Meyer. 2019. « De l’Industrie 4.0 à la Construction 4.0 : Des exemples concrets! ». Communication lors de la conférence : Congrès de l'Association de la construction du Québec ( Charlevoix, QC, Canada, 15-16 mars 2019 )

Clément Lemaire, Louis Rivest, Conrad Boton, Christophe Danjou, Christian Braesch, Felix Nyffenegger. 2019. « Analyzing BIM topics and clusters through ten years of scientific publications ». Journal of Information Technology in Construction (ITcon). vol. 24 p. 273-298.

Alexandre Macloud, Ali Zeighami, Rachid Aissaoui, Louis Rivest. 2019. « Extracting grasping cues from one-handed tools geometry for digital human models ». International Conference on Human Systems Integration (HSI2019) (Biarritz, France, Sept. 11-13, 2019)

Jérémy Montlahuc, Louis Rivest, Jean-Philippe Pernot, Antoine Tahan, Arnaud Polette. 2019. « Vers une utilisation conjointe de données multi-sources pour la génération et le traitement de nuages de points multicouches de parcelles et d’ouvrages existants : constats et premiers éléments d’analyse ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS ( Gatineau, QC, Canada, 27-31 mai 2019 )

Louis Rivest, Christian Braesch, Felix Nyffenegger, Christophe Danjou, Nicolas Maranzana, Frédéric Segonds. 2019. « Identifying PLM themes and clusters from a decade of research literature ». International Journal of Product Lifecycle Management. vol. 12 , nº 2. p. 81-106.

Valentin Thieulin, Louis Rivest, Antoine Tahan. 2019. « Investigation des performances in situ de la numérisation d’une tuyauterie industrielle par photogrammétrie et lumière structurée ». Affiche présentée lors de la conférence : 87 e Congrès de l'ACFAS ( Gatineau, QC, Canada, 27-31 mai 2019 )

J. Ajaja, W. Jomaa, P. Bocher, R. R. Chromik, V. Songmene, M. Brochu. 2019. « Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ». International Journal of Advanced Manufacturing Technology. vol. 104 , nº 1-4. p. 141-157.

Ali Bahloul, Abdelhakim Djebara, Mohamed Nejib Saidi, Victor Songmene, Fernando Villalpando, Marcelo Reggio. 2019. « Computational and experimental analysis of ultrafine particle dispersion during granite polishing ». Aerosol Science and Engineering. vol. 3 , nº 1. p. 21-31.

Ali Bahloul, Rafael Francisco Jorge Vanterpool, Abdelhakim Djebara, Victor Songmene, Mohamed Nejib Said, Jules Kouam, Marcelo Reggio, Fernando Villalpando. 2019. « Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ». «Rapports scientifiques» Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p.

Hamid Javadi, Walid Jomaa, Victor Songmene, Myriam Brochu, Philippe Bocher. 2019. « Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ». International Journal of Precision Engineering and Manufacturing. vol. 20 , nº 8. p. 1297-1310.

F. B. Kouamou, V. Songmene, J. Kouam. 2019. « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 ( London, ON, Canada, June 02-05, 2019 )

Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2019. « Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ». Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019) p. 1382-1390. IEOM Society.

Seyed Ali Niknam, Masoud Saberi, Jules Kouam, Ramin Hashemi, Victor Songmene, Marek Balazinski. 2019. « Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ». Journal of Central South University. vol. 26 , nº 6. p. 1563-1572.

Seyed Ali Niknam, Azziz Tiabi, Victor Songmene. 2019. « Burr edge occupancy: edge finishing index for milling machined parts ». Transactions of the Canadian Society for Mechanical Engineering. vol. 43 , nº 2. p. 248-255.

Oluwole A. Olufayo, Hanqing Che, Victor Songmene, Christina Katsari, Stephen Yue. 2019. « Machinability of Rene 65 superalloy ». Materials. vol. 12 , nº 12.

Oluwole A. Olufayo, Osamaand Elfasi, Victor Songmene. 2019. « Machinability studies of ferritic, austenitic and martensitic stainless steels ». Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019) Western University - Department of Mechanical and Materials Engineering.

M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2019. « Study of surface quality and dust particles emission and dispersion during dry polishing of granite ». International Journal of Advanced Manufacturing Technology. vol. 104 p. 4675-4684.

Mohamed Shnfir, Oluwole A. Olufayo, Walid Jomaa, Victor Songmene. 2019. « Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ». Materials. vol. 12 , nº 23.

Victor Songmene. 2019. « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL ( Trois-Rivières, QC, Canada, 31 janv. 2019 )

Victor Songmene. 2019. « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety ( Berlin, Germany, Apr. 23-24, 2019 )

Victor Songmene. 2019. « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM ( Saint-Hubert, QC, Canada, 01 oct. 2019 )

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2019. « Tool condition monitoring method in milling process using wavelet transform and long short-term memory ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) p. 153-161. INSA.

Kaveh Babanezhad, Gilles Foucault, Vahid Sabri, Antoine Tahan, Jean Bigeon. 2019. « The fixtureless inspection of flexible parts based on semi-geodesic distance ». Precision Engineering. vol. 59 p. 174-184.

Sabrine Ben Amor, Salah Abdellaoui, Antoine Tahan, Borhen Louhichi, João Manuel R. S. Tavares. 2019. « Choosing the best direction of printing for additive manufacturing process in medical applications using a new geometric complexity model based on part CAD data ». VipIMAGE : Proceedings of the VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (Porto, Portugal, Oct. 16-18, 2019) p. 679-692. Springer Netherlands.

Sabrine BEN Amor, Antoine Tahan, Borhen Louhichi. 2019. « Proposition of a geometric complexity model for additive manufacturing process based on CAD ». 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019) p. 442-448. Los Alamitos, CA, USA : IEEE Computer Society.

Olivier Blancke, Amélie Combette, Normand Amyot, Dragan Komljenovic, Mélanie Lévesque, Claude Hudon, Antoine Tahan, Noureddine Zerhouni. 2019. « A predictive maintenance approach for complex equipment based on a failure mechanism propagation model ». International Journal of Prognostics and Health Management. vol. 10 , nº 1. 16 p.

Q. Chatenet, M. Gagnon, L. Tôn-Thât, M. Fouladirad, E. Remy, A. S. Tahan. 2019. « Stochastic modelling of cavitation erosion in Francis runner ». 29th IAHR Symposium on Hydraulic Machinery and Systems (Kyoto, Japan, Sept. 17-21, 2018) UK : IOP Publishing.

Quentin Dollon, Antoine Tahan, Jérôme Antoni, Martin Gagnon, Christine Monette. 2019. « Dynamic characterization of hydroelectric turbine with transient data records using OBMA and phase-shift analysis ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) p. 343-355. INSA.

Marwa Haj Ibrahim, Ali Aidibe, Mohamed Ali Mahjoub, Antoine Tahan, Borhen Louhichi. 2019. « A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology ». International Journal of Advanced Manufacturing Technology. vol. 103 , nº 1-4. p. 409-422.

Ibtissem Jbira, Aicha Ben Makhlouf, Borhen Louhich, Antoine Tahan, Mohamed Ali Mahjoub, Dominique Deneux. 2019. « A comparative study of extraction cylinder features in industrial point clouds ». 23rd International Conference Information Visualisation (IV) (Paris, France, July 02-05, 2019) p. 431-441. Los Alamitos, CA, USA : IEEE Computer Society.

Ibtissem Jbira, Antoine Tahan, Serge Bonsaint, Mohamed Ali Mahjoub, Borhen Louhichi. 2019. « Reproducibility experimentation among computer-aided inspection software from a single point cloud ». Journal of Control Science and Engineering. vol. 2019 10 p.

Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2019. « A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions ». Engineering Structures. vol. 197

Q. H. Pham, M. Gagnon, A. Tahan, C. Monette. 2019. « Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) p. 28-39. INSA.

Antoine Proteau, Antoine Tahan, Marc Thomas. 2019. « Specific cutting energy: a physical measurement for representing tool wear ». International Journal of Advanced Manufacturing Technology. vol. 103 , nº 1-4. p. 101-110.

Antoine Proteau, Marc Thomas, Antoine Tahan. 2019. « Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture ». SURveillance VIbrations SHocks NOise : Book of Proceedings : SURVISHNO (Lyon, France, July 08-10, 2019) p. 546-560. INSA.

Floriane Zongo, Antoine Tahan, Vladimir Brailovski. 2019. « Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing. vol. 3 , nº 2.

Mohammad Ebrahim Bajgholi, Martin Viens. 2019. « Evaluation of the dead zones in the welded joints of hydraulic turbine runners ». Communication lors de la conférence : NDT in Canada 2019 ( Edmonton, AB, Canada, June 18-20, 2019 )

Ali Khademi Far, Louis-Daniel Théroux, Martin Viens, Oliver Arés, Hakim Bendada. 2019. « Non-destructive evaluation of impact damage in CFRP by means of IRT, shearography and ultrasonic testing ». Communication lors de la conférence : NDT in Canada 2019 ( Edmonton, AB, Canada, June 18-20, 2019 )

Alessandra Caggiano, Xavier Rimpault, Roberto Teti, Marek Balazinski, Jean-Francois Chatelain, Luigi Nele. 2018. « Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ». CIRP Annals. vol. 67 , nº 1. p. 483-486.

Pierre Coulon, Jean-François Chatelain, Martine Dubé, Xavier Rimpault. 2018. « Effect of curing pressure on machinability of carbon fiber composite ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) p. 307-310. Elsevier.

Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski, Xavier Rimpault. 2018. « An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ». International Journal of Advanced Manufacturing Technology. vol. 97 , nº 1-4. p. 413-426.

N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018. « Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ». International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)

N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018. « Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ». Journal of Management and Engineering Integration. vol. 11 , nº 1.

H. Kuate-Togue, J-F. Chatelain, C. Ouellet-Plamondon. 2018. « Effect of additives on cutting temperature of glass fibers reinforced polymers ». Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018) CSME.

X. Rimpault, J-F. Chatelain, M. Balazinski. 2018. « Fractal analysis applications for improving monitoring and prediction systems in machining ». 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)

Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2018. « Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ». Journal of Manufacturing and Materials Processing. vol. 2 , nº 3. 7 p.

Xavier Rimpault, Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski. 2018. « Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) p. 417-420. Elsevier.

Jianqiang Chen, Vincent Demers, Daniel P. Turner, Philippe Bocher. 2018. « Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 49A , nº 4. p. 1244-1253.

V. Demers, F. Fareh, S. Turenne, N. R. Demarquette, O. Scalzo. 2018. « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology. vol. 29 , nº 1. 11 p. p. 180-190.

E. Gholami, V. Demers. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (San Antonio, TX, USA, June 17-20, 2018) p. 253-264. Metal Powder Industries Federation.

Ehsan Gholami, Vincent Demers. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». International Journal of Mechanical and Production Engineering. vol. 6 , nº 10. p. 33-38.

D. Texier, F. Atmani, P. Bocher, F. Nadeau, J. Chen, Y. Zedan, N. Vanderesse, V. Demers. 2018. « Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ». International Journal of Fatigue. vol. 116 p. 220-233.

Clodualdo Jr. Aranas, Samuel Rodrigues, Ameth Fall, Mohammad Jahazi, John Jonas. 2018. « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals. vol. 8 , nº 5. 8 p.

Nima Bohlooli Arkhazloo, Farzad Bazdidi-Tehrani, Morin Jean-Benoit, Mohammad Jahazi. 2018. « A numerical thermal analysis of the heating process of large size forged ingots ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) p. 2278-2283. Trans Tech Publications.

Emna Ben Fredj, Hadi Ghasemi Nanesa, Mohammad Jahazi, Jean-Benoit Morin. 2018. « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International. vol. 25 , nº 5. p. 554-562.

Samuel Bertrand, Davood Shahriari, Mohammad Jahazi, Henri Champliaud. 2018. « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ». 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018) p. 1382-1390. Netherlands : Elsevier B.V..

Matthieu Bitterlin, Davood Shahriari, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Mohammad Jahazi. 2018. « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International. vol. 58 , nº 9. p. 1711-1720.

Gary Brionne, Abdelhalim Loucif, Chunping Zhang, Louis-Philippe Lapierre-Boire, Mohammad Jahazi. 2018. « 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) p. 2360-2364. Trans Tech Publications Ltd.

K. Chadha, Z. Ahmed, C. Aranas, D. Shahriari, M. Jahazi. 2018. « Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ». Materialia. vol. 1 p. 155-167.

Frederic Dupont-Marillia, Mohammad Jahazi, Pierre Bélanger. 2018. « Phased array inspection of large size forged steel parts ». 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) American Institute of Physics.

Baoqi Guo, Clodualdo Aranas, Anes Foul, Xiankun Ji, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018. « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering A. vol. 729 p. 119-124.

Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2018. « Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 49 , nº 12. p. 5956-5961.

Abdelhalim Loucif, Emna Ben Fredj, Nathan Harris, Davood Shahriari, Mohammad Jahazi, Louis-Philippe Lapierre-Boire. 2018. « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 49 , nº 3. p. 1046-1055.

Abdelhalim Loucif, Matthieu Bitterlin, Mohammad Jahazi, Rami Tremblay, Jean-Benoît Morin, Louis-Philippe Lapierre-Boire. 2018. « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis. vol. 7 , nº 2. p. 203-208.

Abdelhalim Loucif, Davood Shahriari, Kanwal Chadha, Chunping Zhang, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre-Boire. 2018. « Cracking and failure in a high strength low alloy steel during solidification ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) p. 15-20. Trans Tech Publications Ltd.

Abdelhalim Loucif, Heithem Touazine, Mohammad Jahazi. 2018. « Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ». 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) p. 2284-2289. Trans Tech Publications Ltd.

Mountadar Lyassami, Davood Shahriari, Emna Ben Fredj, Jean-Benoit Morin, Mohammad Jahazi. 2018. « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing. vol. 2 , nº 2. 19 p.

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018. « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) IOP Publishing.

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier. 2018. « Finite element simulation of high-speed blow forming of an automotive component ». Metals. vol. 8 , nº 11. 12 p.

Mahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2018. « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes. vol. 34, part A p. 86-95.

F. Masoumi, L. Thebaud, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, B. C. D. Flipo. 2018. « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering A. vol. 710 p. 214-226.

Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018. « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology. vol. 96 , nº 1-4. p. 371-385.

H.-C. Nguyen, X-T. Pham, M. Jahazi. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

Raiyan Seede, Ahmad Mostafa, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2018. « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing. vol. 2 , nº 2. 21 p.

Binhan Sun, Fateh Fazeli, Colin Scott, Baoqi Guo, Clodualdo Aranas, Xin Chu, Mohammad Jahazi, Stephen Yue. 2018. « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering A. vol. 729 p. 496-507.

Seyyed Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2018. « Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ». THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) p. 305-310. Trans Tech Publications.

Seyyed Hesamondin Talebi, Mohammad Jahazi, Haikouhi Melkonyan. 2018. « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials. vol. 11 , nº 8. 12 p.

C. Zhang, D. Shahriari, A. Loucif, H. Melkonyan, M. Jahazi. 2018. « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology. vol. 99 , nº 9-12. p. 3035-3048.

Chunping Zhang, Abdelhalim Loucif, Mohammad Jahazi, Rami Tremblay, Louis-Philippe Lapierre. 2018. « On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ». Applied Sciences. vol. 8 , nº 10. 11 p.

K. E. Ekstrøm, H. Dalaker, M. Wallin, E. Moosavi-Khoonsari, G. Tranell. 2018. « Extraction of nickel from iron sludge ». Infacon XV: International Ferro-Alloys Congress (Cape Town, South Africa, Feb. 25-28, 2018) Southern African Institute of Mining and Metallurgy.

In-Ho Jung, M.-A. Van Ende, Km Dong-Geun, E. Moosavi-Khoonsari, Minami Tai. 2018. « Thermodynamic database for the slag and refractory system in the coal combustion process ». Communication lors de la conférence : 14th International Ceramics Congress (CIMTECH) ( Perugia, Italy, June 04-08, 2018 )

Dong-Geun Kim, Elmira Moosavi-Khoonsari, In-Ho Jung. 2018. « Thermodynamic modeling of the K2O-Al2O3 and K2O-MgO-Al2O3 systems with emphasis on β- and βʹʹ-aluminas ». Journal of the European Ceramic Society. vol. 38 , nº 9. p. 3188-3200.

Y. Ma, E. Moosavi-Khoonsari, I. Kero, G. Tranell. 2018. « The effect of water vapour on fume formation in a SiMn alloy system ». Infacon XV: International Ferro-Alloys Congress (Cape Town, South Africa, Feb. 25-28, 2018) Southern African Institute of Mining and Metallurgy.

Yan Ma, Elmira Moosavi-Khoonsari, Ida T. Kero, Gabriella M. Tranell. 2018. « Element distribution in the silicomanganese production process ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 49 , nº 5. p. 2444-2457.

E. Moosavi-Khoonsari, M. A. Van Ende, I. H. Jung. 2018. « Kinetic model for hot metal pretreatment using lime and magnesium ». 7th International Congress on Science and Technology of Steelmaking : The Challenge of Industry 4.0 (Venice, Italy, June 13-15, 2018) p. 478-485. Associazione Italiana di Metallurgia.

Wojciech Polkowski, Natalia Sobczak, Rafal Nowak, Artur Kudyba, Grzegorz Bruzda, Adelajda Polkowska, Marta Homa, Patrycja Turalska, Merete Tangstad, Jafar Safarian, Elmira Moosavi-Khoonsari, Alejandro Datas. 2018. « Wetting behavior and reactivity of molten silicon with h-BN substrate at ultrahigh temperatures up to 1750C ». Journal of Materials Engineering and Performance. vol. 27 , nº 10. p. 5040-5053.

F. N. H. Schrama, E. Moosavi-Khoonsari, E. M. Beunder, C. Kooij, R. Boom, J. Sietsma, Y. Yang. 2018. « Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation ». 7th International Congress on Science and Technology of Steelmaking : The Challenge of Industry 4.0 (Venice, Italy, June 13-15, 2018) p. 460-468. Associazione Italiana di Metallurgia.

Frank N. H. Schrama, Elisabeth M. Beunder, Elmira Moosavi-Khoonsari, Rob Boom, Jilt Sietsma, Yongxiang Yang. 2018. « Optimal slag in hot metal desulphurisation ». Affiche présentée lors de la conférence : MSE Technology poster presentation ( Delft, Netherlands, June 07, 2018 )

Maria Wallin, Kai Erik Ekstrøm, Elmira Moosavi-Khoonsari, Gabriella Tranell. 2018. « Formation of MnFe alloy by melting siliconmanganese sludge with iron scrap ». Communication lors de la conférence : Extraction 2018 : First Global Conference on Extractive Metallurgy ( Ottawa, ON, Canada, Aug. 26-29, 2018 )

Z. Arhumah, M. Alkhabbat, X-T. Pham. 2018. « Heat effect on mechanical properties and microstructure of aluminum welding ». Affiche présentée lors de la conférence : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

D. D. Dang, X. T. Pham, P. Labbe, F. Torriano, J. F. Morissette, C. Hudon. 2018. « CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ». Applied Thermal Engineering. vol. 130 p. 17-28.

M. Gharagozloo, X-T. Pham, C-C Nguyen. 2018. « Feasibility study of aluminium deposition by robotic MIG welding process ». CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)

T.-N. Tran, C.-C. Nguyen, X.-T. Pham. 2018. « Multi-physics modeling of aluminium laser welding process ». Affiche présentée lors de la conférence : REGAL student’s day ( Montreal, QC, Canada, June 18-19, 2018 )

Conrad Boton, Louis Rivest, Daniel Forgues, Julie R. Jupp. 2018. « Comparison of shipbuilding and construction industries from the product structure standpoint ». International Journal of Product Lifecycle Management. vol. 11 , nº 3. p. 191-220.

Benjamin Guérineau, Louis Rivest, Matthieu Bricogne, Alexandre Durupt, Benoît Eynard. 2018. « Towards a design-method selection framework for multidisciplinary product development ». 15th International Design Conference (DESIGN 2018) (Dubrovnik, Croatia, May 21-24, 2018) p. 2879-2890. Faculty of Mechanical Engineering and Naval Architecture.

Roland Maranzana, Omar Msaaf, Louis Rivest. 2018-04-17. « Method and system for comparing 3D models ».

Roland Maranzana, Omar Msaaf, Louis Rivest. 2018-12-18. « Méthode et système de comparaison de modèles 3D ».

L. Rivest, C. Danjou, R. Pellerin. 2018. « Positionnements stratégiques dans le contexte de l'industrie 4.0 ». Communication lors de la conférence : Table ronde 4.0 CEFRIO Prompt : De la pme 2.0 à l’entreprise 4.0 : la révolution des données ( Montreal, QC, Canada, 31 mai 2018 )

Louis Rivest, Christophe Danjou, Lola Lange, Robert Pellerin. 2018. « Positionnements stratégiques du vêtement connecté dans le contexte de l’Industrie 4.0 ». Communication lors de la conférence : Wear It Smart ( Montreal, QC, Canada, May 10, 2018 )

Louis Rivest, Christophe Danjou, Robert Pellerin. 2018. « Des pistes pour aborder l’ère du 4.0 ». Communication lors de la conférence : Table d'innovation - Conseil économique et tourisme du Haut-Richelieu ( St-Jean sur le Richelieu, QC, Canada, 20 juin 2018 )

A. Bouzid, V. Songmene, J. P. Kenné. 2018. « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) p. 294-300. Comite Africain de Metrologie.

Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2018. « Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ». Aerosol Science and Engineering. vol. 2 , nº 2. p. 92–97.

Guy Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenné, Vladimir Polotski, Victor Songmene. 2018. « Maintenance and setup planning in manufacturing systems under uncertainties ». Journal of Quality in Maintenance Engineering. vol. 24 , nº 2. p. 170-184.

Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018. « Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ». International Journal of Advanced Manufacturing Technology. vol. 99 , nº 1-4. p. 789-802.

Mohsen Marani, Victor Songmene, Jules Kouam, Yasser Zedan. 2018. « Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ». 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018) Piscataway, NJ, USA : IEEE.

Mohsen Marani-Barzani, Victor Songmene. 2018. « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day ( ,  )

Seyed Ali Niknam, Behnam Davoodi, J. Paulo Davim, Victor Songmene. 2018. « Mechanical deburring and edge-finishing processes for aluminum partsa review ». International Journal of Advanced Manufacturing Technology. vol. 95 , nº 1-4. 25 p. p. 1101-1125.

Seyed Ali Niknam, Jules Kouam, Victor Songmene, Marek Balazinski. 2018. « Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) p. 62-65. Elsevier.

Francisco G. Pantoja, Victor Songmene, Jean-Pierre Kenné, Oluwole A. Olufayo, Michael Ayomoh. 2018. « Development of a tool cost optimization model for stochastic demand of machined products ». Applied Mathematics. vol. 9 , nº 12. p. 1395-1423.

Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018. « A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ». International Journal of Advanced Manufacturing Technology. vol. 96 , nº 9-12. p. 3747-3791.

Morteza Sadeghifar, Ramin Sedaghati, Walid Jomaa, Victor Songmene. 2018. « Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ». International Journal of Advanced Manufacturing Technology. vol. 94 , nº 5-8. p. 2457-2474.

M. N. Saidi, V. Songmene, J. Kouam, A. Bahloul. 2018. « Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 1-4. p. 289-303.

V. Songmene, J. Kouam, A. Balhoul. 2018. « Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ». Measurement: Journal of the International Measurement Confederation. vol. 114 p. 398-408.

V. Songmene, A. Miazza, J. Kouam, O.A. Olufayo. 2018. « Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ». 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) p. 37-46. Comite Africain de Metrologie.

Victor Songmene. 2018. « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon ( London, UK, May 28-29, 2018 )

Victor Songmene, Alban Miazza, Mohamed Amine Hechmi, Oluwole Ayodeji Olufayo, Jules Kouam. 2018. « Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) p. 139-142. Elsevier.

Victor Songmene, Imed Zaghbani, Guillaume Kientzy. 2018. « Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) p. 505-508. Elsevier.

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018. « Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ». International Journal of Mechanical Engineering and Robotics Research. vol. 7 , nº 1. p. 30-34.

Fatemeh Aghazadeh, Antoine Tahan, Marc Thomas. 2018. « Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 9-12. p. 3217-3227.

A. Aidibe, A. Tahan, V. Brailovski. 2018. « A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ». Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018) European Powder Metallurgy Association (EPMA).

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2018. « A comparison between aggregation before and after propagation based on a reliability model ». Information Sciences. vol. 453 p. 99-110.

Olivier Blancke, Amélie Combette, Normand Amyot, Dragan Komljenovic, Mélanie Lévesque, Claude Hudon, Antoine Tahan, Noureddine Zerhouni. 2018. « A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ». Proceedings of the European Conference of the PHM Society. vol. 4 , nº 1. 12 p.

Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Mélanie Lévesque, Claude Hudon. 2018. « A holistic multi-failure mode prognosis approach for complex equipment ». Reliability Engineering and System Safety. vol. 180 p. 136-151.

P. Cambron, C. Masson, A. Tahan, F. Pelletier. 2018. « Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ». Renewable Energy. vol. 116 , nº B. 11 p. p. 88-98.

Alexandre Filion, Ahmed Joubair, Antoine S. Tahan, Ilian A. Bonev. 2018. « Robot calibration using a portable photogrammetry system ». Robotics and Computer-Integrated Manufacturing. vol. 49 p. 1339-1351.

Hamid Habibzadeh Boukani, Martin Viens, Souheil-Antoine Tahan, Martin Gagnon. 2018. « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology. vol. 98 , nº 5-8. p. 2201-2211.

Ibtissem Jbira, Antoine Tahan, Mohammed Ali Mahjoub, Borhen Louhichi. 2018. « Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ». ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)

M. Nassar, L. Guizani, M. -J. Nollet, A. Tahan. 2018. « Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ». 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)

Mohamad Nassar, Lotfi Guizani, Marie-José Nollet, Antoine Tahan. 2018. « A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ». 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018) p. 2773-2777. Earthquake Engineering Research Institute.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2018. « “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ». International Journal of Advanced Manufacturing Technology. vol. 97 , nº 1-4. p. 353-373.

Floriane Zongo, Antoine Tahan, Ali Aidibe, Vladimir Brailovski. 2018. « Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing. vol. 2 , nº 3. 14 p.

Guillaume Boivin, Martin Viens, Pierre Belanger. 2018. « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors. vol. 18 , nº 2.

M. Daoud, J. F. Chatelain, A. Bouzid. 2017. « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences. vol. 122 p. 392-404.

J. Delahaigue, J. F. Chatelain, G. Lebrun. 2017. « Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ». Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials: Design and Applications. vol. 231 , nº 1-2. p. 196-209.

Jérémy Delahaigue, Jean-Francois Chatelain, Gilbert Lebrun. 2017. « Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ». Fibers. vol. 5 , nº 4.

Seyedbehzad Ghafarizadeh, Amir Masoud Tahvilian, Jean-François Chatelain, Zhaoheng Liu, Henri Champliaud, Gilbert Lebrun. 2017. « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology. vol. 88 , nº 1. 8 p. p. 401-408.

K. Karabibene, J.-F. Chatelain, Y. Beauchamp, G. Lebrun. 2017. « Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ». 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)

Simon G. Lamarre, Vincent Demers, Jean-François Chatelain. 2017. « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology. vol. 91 , nº 5-8. 11 p. p. 2595-2605.

X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2017. « Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ». CIRP Journal of Manufacturing Science and Technology. vol. 16 9 p. p. 72-80.

Xavier Rimpault, Jean-François Chatelain, Jolanta Ewa Klemberg-Sapieha, Marek Balazinksi. 2017. « Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ». Mechanics & Industry. vol. 18 , nº 1. 11 p.

M. Slamani, S. Djeffal, J-F. Chatelain. 2017. « Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ». La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)

Jianqiang Chen, Vincent Demers, Eve-Line Cadotte, Daniel Turner, Philippe Bocher. 2017. « Structural performance of inconel 625 superalloy brazed joints ». Journal of Materials Engineering and Performance. vol. 26 , nº 2. 7 p. p. 547-553.

V. Demers, M. M. Elmajdoubi, P. Bocher. 2017. « Moldability of low-pressure powder injection molding feedstocks ». Advances in Powder Metallurgy & Particulate Materials 2017 : Conference Proceedings (Las Vegas , NV, USA, June 13-16, 2017) p. 401-414. Metal Powder Industries Federation.

F. Fareh, V. Demers, N. R. Demarquette, S. Turenne, O. Scalzo. 2017. « Influence of segregation on rheological properties of wax-based feedstocks ». Powder Technology. vol. 320 p. 273-284.

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology. vol. 88 , nº 9-12. 9 p. p. 3395-3403.

Clodualdo Aranas, Anes Foul, Baoqi Guo, Ameth Fall, Mohammad Jahazi, John J. Jonas. 2017. « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia. vol. 133 p. 83-85.

Ali Bonakdar, Marjan Molavi-Zarandi, Ahmad Chamanfar, Mohammad Jahazi, Arash Firoozrai, Eric Morin. 2017. « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes. vol. 26 p. 339-354.

Yassine Bouissa, Henri Champliaud, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin, Nicolas Poulain. 2017. « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) ( Montreal, QC, Canada, July 17-20, 2017 )

K. Chadha, D. Shahriari, R. Tremblay, P. P. Bhattacharjee, M. Jahazi. 2017. « Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 48 , nº 9. p. 4297-4313.

Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2017. « An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ». Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015) p. 239-246. Springer.

Ahmad Chamanfar, Hossein Monajati, Alex Rosenbaum, Mohammad Jahazi, Ali Bonakdar, Eric Morin. 2017. « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization. vol. 132 p. 53-68.

S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin, M. Jahazi. 2017. « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology. vol. 88 , nº 9-12. 9 p. p. 2929-2937.

Frederic Dupont-Marillia, Mohammad Jahazi, Serge Lafreniere, Pierre Bélanger. 2017. « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) USA : American Institute of Physics.

A. Fall, M. Jahazi, A. R. Khodabandeh, M. H. Fesharakib. 2017. « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology. vol. 91 , nº 5-8. 13 p. p. 2919-2931.

Emna Ben Fredj, Hadi Ghasemi Nanesa, Davood Shahriari, Jean-Benoit Morin, Mohammad Jahazi. 2017. « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) p. 413-423. Springer International Publishing.

Hadi Ghasemi-Nanesa, Mohammad Jahazi, Majid Heidari, Tom Levasseur. 2017. « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) USA : American Institute of Physics.

Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2017. « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes. vol. 26 p. 131-141.

S. Hesamodin Talebi, Hadi Ghasemi-Nanesa, Mohammad Jahazi, Haikouhi Melkonyan. 2017. « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals. vol. 7 , nº 9. 13 p.

John J. Jonas, Clodualdo Aranas, Ameth Fall, Mohammad Jahazi. 2017. « Transformation softening in three titanium alloys ». Materials & Design. vol. 113 p. 305-310.

A. Loucif, M. Bitterlin, M. Jahazi, R. Tremblay, J. B. Morin, L. P. Lapierre-Boire. 2017. « Crack analysis in as cast large size ingot of a high strength steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) p. 766-767. International Conference on Fracture.

A. Loucif, D. Shahriari, K. Chadha, M. Jahazi, R. Tremblay, L. P. Lapierre-Boire. 2017. « Analysis of cracks and failure during solidification of a high strength low alloy steel ». 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017) p. 770-771. International Conference on Fracture.

Abdelhalim Loucif, Davood Shahriari, Chunping P. Zhang, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017. « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) p. 1176-1181. Trans Tech Publications.

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier, Ehab Samuel. 2017. « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) USA : American Institute of Physics.

F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, B. C. D. Flipo. 2017. « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 48A , nº 6. 14 p. p. 2886-2899.

Ahmad Mostafa, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj. 2017. « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals. vol. 7 , nº 6. 23 p.

Mohammad Saadati, Rasoul Azari Khosroshahi, Golamreza Ebrahimi, Mohammad Jahazi. 2017. « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering A. vol. 706 p. 142-152.

Mohammad Saadati, Rasoul Azari Khosroshahi, Gholamreza Ebrahimi, Mohammad Jahazi. 2017. « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization. vol. 131 p. 234-243.

Binhan Sun, Nicolas Vanderesse, Fateh Fazeli, Colin Scott, Jianqiang Chen, Philippe Bocher, Mohammad Jahazi, Stephen Yue. 2017. « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia. vol. 133 p. 9-13.

Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2017. « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology. vol. 239 p. 284-296.

Heithem Touazine, Jordan Akab, Mohammad Jahazi, Antoine Tahan, Walid Jomaa, Philippe Bocher. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology. vol. 93 , nº 9-12. 8 p. p. 3705-3712.

Heithem Touazine, Mohammad Jahazi, Philippe Bocher. 2017. « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology. vol. 88 , nº 9-12. 9 p. p. 3419-3427.

C. Zhang, D. Shahriari, A. Loucif, L. -Ph. Lapierre-Boire, R. Tremblay, H. Melkonyan, M. Jahazi. 2017. « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night ( Montreal, QC, Canada, March 15, 2017 )

Chunping P. Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017. « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) p. 491-500. Springer International Publishing.

Chunping Zhang, Davood Shahriari, Abdelhalim Loucif, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Rami Tremblay. 2017. « Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ». 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017) The Chinese Society for Metals.

In-Ho Jung, Elmira Moosavi-Khoonsari, Ting Wu. 2017. « Thermodynamic properties of oxide compounds estimated from polyhedron method ». Communication lors de la conférence : CALPHAD XLVI Conference ( Saint-Malo, France, June 11-16, 2017 )

Elmira Moosavi-Khoonsari, Farzad Jalilian, Florence Paray, Daryoush Emadi, Robin A. L. Drew. 2017. « Wettability behavior of Zinc-Based Alloys on cast iron ». Metallography, Microstructure, and Analysis. vol. 6 , nº 3. p. 221-232.

Elmira Moosavi-Khoonsari, In-Ho Jung. 2017. « Critical evaluation and thermodynamic optimization of the Na2O–FeO–Fe2O3–Al2O3–SiO2 system ». Journal of the European Ceramic Society. vol. 37 , nº 2. p. 787-800.

Ting Wu, Elmira Moosavi-Khoonsari, In-Ho Jung. 2017. « Estimation of thermodynamic properties of oxide compounds from polyhedron method ». Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. vol. 57 p. 107-117.

Mathieu Gendron, Bruce Hazel, Eric Boudreault, Henri Champliaud, Xuan-Tan Pham. 2017. « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications. vol. 31 , nº 13. 23 p. p. 1232-1254.

F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017. « Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ». Materials Characterization. vol. 123 p. 264-274.

F. Mirakhorli, X. Cao, X. T. Pham, P. Wanjara, J. L. Fihey. 2017. « Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ». International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) p. 1305-1310. Trans Tech Publications.

V. Sabri, S. Sattarpanah, S. A. Tahan, J. C. Cuillière, V. François, X. T. Pham. 2017. « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology. vol. 92 , nº 5-8. p. 2411-2423.

Ngoc-Hung Vu, Vincent François, Jean-Christophe Cuillière, Xuan-Tan Pham. 2017. « Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016) p. 96-103. DEStech publications.

Christophe Danjou, Robert Pellerin, Louis Rivest. 2017. « Le passage au numérique : Industrie 4.0 : des pistes pour aborder l'ère du numérique et de la connectivité ». Québec. Centre francophone d’informatisation des organisations (CEFRIO). 26 p.

Christophe Danjou, Louis Rivest, Robert Pellerin. 2017. « Douze positionnements stratégiques pour l’Industrie 4.0 : entre processus, produit et service, de la surveillance à l’autonomie ». CIGI 2017 : 12ème Congrès International de Génie Industriel (Compiègne, France, 3-5 mai 2017)

Benjamin Guerineau, Chen Zheng, Matthieu Bricogne, Alexandre Durupt, Louis Rivest, Harvey Rowson, Benoît Eynard. 2017. « Management of heterogeneous information for integrated design of multidisciplinary systems ». 27th CIRP Design 2017 (Cranfield, UK, May 10-12, 2017) p. 320-325. Elsevier.

Louis Rivest. 2017. « Des cas concrets de réussite à l’ère du 4.0 ». Communication lors de la conférence : Colloque sur l’industrie 4.0 ( Montréal, QC, Canada, 25 août 2017 )

Louis Rivest, Christophe Danjou, Robert Pellerin. 2017. « Positionnements stratégiques pour l’Industrie 4.0 ». Communication lors de la conférence : Entretiens Jacques Cartier : Vers l'Entreprise Aérospatiale Intelligente ( Montréal, QC, Canada, 17 oct. 2017 )

Mohsen Marani Barzani, Saeed Farahany, Victor Songmene. 2017. « Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ». Measurement. vol. 110 p. 263-274.

Tarek Elgnemi, Keivan Ahmadi, Victor Songmene, Jungsoo Nam, Martin B. G. Jun. 2017. « Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ». Journal of Manufacturing Processes. vol. 30 p. 133-140.

Walid Jomaa, Oussama Mechri, Julie Levesque, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017. « Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ». Journal of Manufacturing Processes. vol. 26 p. 446-458.

Walid Jomaa, Victor Songmene, Philippe Bocher. 2017. « Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ». Machining Science and Technology. vol. 21 , nº 3. 27 p. p. 335-361.

Walid Jomaa, Victor Songmene, Philippe Bocher, Augustin Gakwaya. 2017. « Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ». 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017) p. 347-353.

Frank Éric Kemi Yotat, Jean-Pierre Kenné, Victor Songmene. 2017. « Optimal stochastic control of an aluminium recycling unit in reverse logistics ». 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017) p. 385-390. CAL-TEK S.r.l..

Riad Khettabi, Mourad Nouioua, Abdelhakim Djebara, Victor Songmene. 2017. « Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ». International Journal of Advanced Manufacturing Technology. vol. 92 , nº 5/8. 6 p. p. 2593-2598.

Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017. « Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ». Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017) The Institute of Research Engineers and Scientists International Conference.

Mohsen Marani, Victor Songmene, Ibrahem Maher. 2017. « Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ». International Journal of Advances in Science, Engineering and Technology. vol. 5 , nº 3, Supp. 1. p. 11-14.

Seyed Ali Niknam, Marek Balazinski, Victor Songmene. 2017. « To characterize and optimize the surface quality attributes in slot milling operation ». International Journal of Advanced Manufacturing Technology. vol. 93 , nº 1-4. 20 p. p. 727-746.

Seyed Ali Niknam, Victor Songmene. 2017. « Burr formation and correlation with cutting force and acoustic emission signals ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. vol. 231 , nº 3. p. 399-414.

Philippe Cambron, Christian Masson, Antoine Tahan, David Torres, Francis Pelletier. 2017. « Comparison of power curve monitoring methods ». International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017) EDP Sciences.

Philippe Cambron, Antoine Tahan, Christian Masson, Francis Pelletier. 2017. « Bearing temperature monitoring of a Wind Turbine using physics-based model ». Journal of Quality in Maintenance Engineering. vol. 23 , nº 4. p. 479-488.

I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2017. « CAD/Tolerancing integration: Mechanical assembly with form defects ». Advances in Engineering Software. vol. 114 13 p. p. 312-324.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Antoine Souheil Tahan. 2017. « Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ». Journal of Verification, Validation and Uncertainty Quantification. vol. 2 , nº 4. 22 p.

Marc Poirier, Martin Gagnon, Antoine Tahan, André Coutu, Joël Chamberland-lauzon. 2017. « Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ». Mechanical Systems and Signal Processing. vol. 82 p. 193-205.

H. H. Boukani, E. Mohseni, M. Viens. 2017. « Effect of fatigue crack orientation on the sensitivity of eddy current inspection in martensitic stainless steels ». Communication lors de la conférence : NDT in Canada 2017 ( Québec, QC, Canada, June 06-08, 2017 )

Shilan Meimandi, Nicolas Vanderesse, Denis Thibault, Philippe Bocher, Martin Viens. 2017. « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization. vol. 124 p. 31-39.

E. Mohseni, M. Viens. 2017. « Sensitivity of eddy current signals to probe's tilt and lift-off while scanning semi-elliptical surface notches - a finite element modeling approach ». Communication lors de la conférence : NDT in Canada 2017 ( Québec, QC, Canada, June 06-08, 2017 )

Denis Thibault, Shilan Meimandi, Nicolas Vanderesse, Philippe Bocher, Martin Viens, Myriam Brochu, Martin Gagnon. 2017. « Linking defects found by non-destructive testing in stainless steel castings to the fatigue analysis of hydraulic turbines ». Communication lors de la conférence : 3rd International Symposium on Fatigue Design and Material Defects (FDMD) ( Lecco, Italy, Sept. 19-22, 2017 )

Christophe Travaglini, Christophe Bescond, Martin Viens, Pierre Belanger. 2017. « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring. vol. 16 , nº 4.

Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016. « Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ». Science and Engineering of Composite Materials. vol. 23 , nº 5. p. 543-550.

Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016. « Finite element analysis of surface milling of carbon fiber-reinforced composites ». International Journal of Advanced Manufacturing Technology. vol. 87 , nº 1. 11 p. p. 399-409.

Seyedbehzad Ghafarizadeh, Gilbert Lebrun, Jean-François Chatelain. 2016. « Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ». Journal of Composite Materials. vol. 50 , nº 8. p. 1059-1071.

S. G. Lamarre, V. Demers, J-F. Chatelain. 2016. « Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ». MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016) p. 175-183. Advanced Engineering Solutions.

S. Lamarre, V. Demers, J. F. Chatelain. 2016. « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants ( Montréal, QC, Canada, 9 mars 2016 )

X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2016. « Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ». Measurement. vol. 91 p. 84-92.

Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinski. 2016. « Surface profile topography of trimmed and drilled carbon/epoxy composite ». 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016) p. 27-30. Elsevier.

Xavier Rimpault, Jean-François Chatelain, Jolanta-Ewa Klemberg-Sapieha, Marek Balazinski. 2016. « Fractal analysis of cutting force and acoustic emission signals during CFRP machining ». 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) p. 143-146. Elsevier.

Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2016. « Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ». Robotics and Computer-Integrated Manufacturing. vol. 42 p. 63-72.

F. Fareh, V. Demers. 2016. « Rheological behavior of Inconel 718 feedstocks used in low-pressure powder injection molding ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants ( Montréal, QC, Canada, 9 mars 2016 )

F. Fareh, V. Demers, S. Turenne, O. Scalzo. 2016. « Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding ». International Conference on Advanced Materials Engineering and Technology (ICAMET) (Kaohsiung City, Taiwan, Dec. 4-5, 2015) p. 286-290. Trans Tech Publications Ltd.

Fouad Fareh, Vincent Demers, Nicole R. Demarquette, Sylvain Turenne, Orlando Scalzo. 2016. « Molding properties of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advances in Materials Science and Engineering. vol. 2016 7 p.

A. Mourier, V. Demers, Y. Baril, J. Figueroa. 2016. « Characterization of copper-silver-copper joints fabricated by sintering of silver nanoparticles ». International Conference & Exhibition on Advanced & Nano Materials (ICANM) (Montreal, QC, Canada, Aug. 01-03, 2016) p. 145-155.

Ali Aidibe, Mojtaba Kamali Nejad, Antoine Tahan, Mohammad Jahazi, Sylvain G. Cloutier. 2016. « A proposition for new quality 3D indexes to measure surface roughness ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) p. 327-330. Elsevier.

M. Anderson, F. Bridier, J. Gholipour, M. Jahazi, P. Wanjara, P. Bocher, J. Savoie. 2016. « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance. vol. 25 , nº 4. 13 p. p. 1526-1538.

Matthieu Bitterlin, Abdelhalim Loucif, Nicolas Charbonnier, Mohammad Jahazi, Louis-Philippe Lapierre-Boire, Jean-Benoît Morin. 2016. « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis. vol. 68 p. 122-131.

K. Chadha, D. Shahriari, M. Jahazi. 2016. « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana. vol. 108 , nº 4. p. 5-12.

Kanwal Chadha, Davood Shahriari, Mohammad Jahazi. 2016. « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) EDP Sciences.

Ameth Fall, Mostafa Hashemi Fesharaki, Ali Reza Khodabandeh, Mohammad Jahazi. 2016. « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals. vol. 6 , nº 11. 12 p. p. 275-286.

Hadi Ghasemi-Nanesa, Heithem Touazine, Mohammad Jahazi. 2016. « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology. vol. 85 , nº 1. p. 881-890.

Rupanjit Grewal, Clodualdo Aranas, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2016. « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia. vol. 109 p. 23-31.

Nathan Harris, Davood Shahriari, Mohammad Jahazi. 2016. « Analysis of void closure during open die forging process of large size steel ingots ». 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016) p. 579-585.

F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier. 2016. « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds. vol. 658 p. 981-995.

F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux. 2016. « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports. vol. 6 16 p.

Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016. « Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ». 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)

Mahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. 2016. « The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ». 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016) The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA).

Hadi Ghasemi Nanesa, Julien Boulgakoff, Mohammad Jahazi. 2016. « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes. vol. 22 p. 115-119.

Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi Nanesa. 2016. « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology. vol. 82 , nº 1-4. p. 39-48.

G. D. Sathiaraj, C. W. Tsai, J. W. Yeh, M. Jahazi, P. P. Bhattacharjee. 2016. « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds. vol. 688 p. 752-761.

D. Shahriari, A. Loucif, N. Harris, Y. Bouissa, M. Jahazi, L. P. Lapierre-Boire, N. Poulain. 2016. « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference ( Colombus, OH, USA, Sept. 19-20, 2016 )

A. Tongne, H. Robe, C. Desrayaud, M. Jahazi, E. Feulvarch. 2016. « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) USA : American Institute of Physics.

Mariem Zoghlami, Mohammad Jahazi, Victor Songmene. 2016. « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) p. 155-159. Trans Tech Publications Ltd.

Mariem Zoghlami, Hossein Monajati, Mohammad Jahazi, Victor Songmene. 2016. « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) ( Québec, QC, Canada, Oct. 03-06, 2016 )

Pierre Hudon, Dong-Geun Kim, Bikram Konar, Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Challenges in experimental phase diagram determinations of oxide systems ». Communication lors de la conférence : 14th International Union of Materials Research Societies - International Conference on Advanced Materials ( Jeju, Korea, Oct. 25-29, 2015 )

In-Ho Jung, Elmira Moosavi-Khoonsari. 2016. « Limitation of sulfide capacity concept for molten slags ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 2. p. 819-823.

Elmira Moosavi-Khoonsari, Pierre Hudon, In-Ho Jung. 2016. « Coupled experimental and thermodynamic optimization of the Na2O-FeO-Fe2O3-Al2O3 system: Part 1. Phase diagram experiments ». Journal of the American Ceramic Society. vol. 99 , nº 2. p. 705-714.

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Coupled experimental and thermodynamic optimization of the Na2O-FeO-Fe2O3-Al2O3 system: Part 2. Thermodynamic optimization ». Journal of the American Ceramic Society. vol. 99 , nº 2. p. 715-722.

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Critical evaluation and thermodynamic optimization of the Na2O-FeO-Fe2O3 system ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 1. p. 576-594.

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Critical evaluation and thermodynamic optimization of the Na2O-FeO-Fe2O3-SiO2 system ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 1. p. 291-308.

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Thermodynamic modeling of hot metal desulfurization using Na2O-based fluxes ». Affiche présentée lors de la conférence : TMS 2016 : 145th Annual Meeting and Exhibition ( Nashville, TN, USA, Feb. 14-18, 2016 )

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Thermodynamic modeling of sulfide capacities of Na2O-containing fluxes and its application to hot metal pretreatment ». Communication lors de la conférence : 10th International Conference on Molten Slags, Fluxes and Salts ( Seattle, WA, United states, May 22–25, 2016 )

Elmira Moosavi-Khoonsari, In-Ho Jung. 2016. « Thermodynamic modeling of sulfide capacity of Na2O-Containing oxide melts ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 5. p. 2875-2888.

D.-D. Dang, X.-T. Pham. 2016. « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». In Mathematical and Computational Approaches in Advancing Modern Science and Engineering . p. 413-424. Springer International Publishing.

Mathieu Gendron, Éric Boudreault, Bruce Hazel, Xuan-Tan Pham, Henri Champliaud. 2016. « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology. vol. 84 , nº 5. p. 1013-1029.

Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016. « Hybrid laser-arc welding of 10-mm-thick cast martensitic stainless steel CA6NM: as-welded microstructure and mechanical properties ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 47 , nº 7. 19 p. p. 3545-3563.

Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2016. « Post-weld tempered microstructure and mechanical properties of hybrid laser-arc welded cast martensitic stainless steel CA6NM ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. vol. 47 , nº 6. p. 3245-3256.

X. T. Pham, N. H. Vu, V. François, J. -C. Cuillière. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) ( Montréal, QC, Canada, 4 mai 2016 )

V. Sabri, S. A. Tahan, X. T. Pham, D. Moreau, S. Galibois. 2016. « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology. vol. 82 , nº 5-8. p. 1343-1352.

Josée Beaudoin, Geneviève Lefebvre, Mélanie Normand, Vanessa Gouri, Alexandre Skerlj, Robert Pellerin, Louis Rivest, Christophe Danjou. 2016. « Prendre part à la révolution manufacturière? Du rattrapage technologique à l’Industrie 4.0 chez les PME ». Québec. Centre francophone d’informatisation des organisations (CEFRIO). 31 p.

Conrad Boton, Louis Rivest, Daniel Forgues, Julie Jupp. 2016. « Comparing PLM and BIM from the product structure standpoint ». 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) 2016 (Columbia, SC, USA, July 11-13, 2016) p. 443-453. Springer New York LLC.

Benjamin Guerineau, Matthieu Bricogne, Alexandre Durupt, Louis Rivest. 2016. « Mechatronics vs. cyber physical systems: towards a conceptual framework for a suitable design methodology ». 11th France-Japan and 9th Europe-Asia Congress on Mechatronics / 17th International Conference on Research and Education in Mechatronics (REM ) (Compiegne, France, June 15-17, 2016) p. 314-320. Institute of Electrical and Electronics Engineers Inc..

Benjamin Guerineau, Louis Rivest, Matthieu Bricogne, Alexandre Durupt. 2016. « Agile and project-planned methods in multidisciplinary product design ». 13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries (PLM) (Columbia, SC, USA, July 11-13, 2016) p. 108-118. Springer New York LLC.

Felix Nyffenegger, Louis Rivest, Christian Braesch. 2016. « Identifying PLM themes, trends and clusters through ten years of scientific publications ». Product Lifecycle Management for Digital Transformation of Industries :13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016, Revised Selected Papers (Columbia, SC, USA, July 11-13, 2016) p. 579-591. Springer.

Samira Sadeghi, Thomas Dargon, Louis Rivest, Jean-Philippe Pernot. 2016. « Capturing and analysing how designers use CAD software ». Eleventh International Symposium on Tools and Methods for Competitive Engineering (TMCE’16) (Aix-en-Provence, France, May 9-13, 2016)

W. Jomaa, J. Mechri, J. Lévesque, A. Gakwaya, V. Songmene, P. Bocher. 2016. « Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ». XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)

W. Jomaa, V. Songmene, P. Bocher. 2016. « An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ». Materials and Manufacturing Processes. vol. 31 , nº 7. 7 p. p. 838-844.

Walid Jomaa, Victor Songmene, Philippe Bocher. 2016. « An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ». Journal of Materials Engineering and Performance. vol. 25 , nº 3. p. 1010-1027.

Guy-Richard Kibouka, Donatien Nganga-Kouya, Jean-Pierre Kenne, Victor Songmene, Vladimir Polotski. 2016. « Production planning of a failure-prone manufacturing system under different setup scenarios ». Journal of Applied Mathematics. vol. 2016 15 p.

A. F. Kouedeu, J-P. Kenné, V. Songmene. 2016. « Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

J. B. Mandatsy Moungomo, D. Nganga-Kouya, V. Songmene, J. Kouam, J. P. Kenné. 2016. « Machinability study of recycled aluminum cans and machining chips ». International Journal of Advanced Manufacturing Technology. vol. 87 , nº 9. 16 p. p. 2551-2566.

Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016. « Aluminium machining chips formation, treatment recycling: A review ». 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016) p. 71-76. Trans Tech Publications Ltd.

Jean Brice Mandatsy Moungomo, Donatien Nganga Kouya, Victor Songmene. 2016. « Turning and drilling machinability of recycled aluminum alloys ». 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) p. 77-82. Trans Tech Publications Ltd.

Seyed Ali Niknam, Jules Kouam, Victor Songmene. 2016. « Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials. vol. 18 , nº 1-2. p. 120-137.

Fatemeh Aghazadeh, M. Thomas, A. Tahan. 2016. « Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ». CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)

Ali Aidibe, Antoine Tahan, Vladimir Brailovski. 2016. « Metrological investigation of a selective laser melting additive manufacturing system: A case study ». IFAC-PapersOnLine. vol. 49 , nº 31. p. 25-29.

Kaveh Babanezhad, Gilles Foucault, Antoine Tahan, Jean Bigeon. 2016. « A bi-criterion flexible registration method for fixtureless inspection of compliant parts ». 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) p. 307-310. Elsevier.

Mounia Berdai, Antoine Tahan, Martin Gagnon. 2016. « Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering. vol. 3 , nº 1. 8 p.

M. Berdal, S-A. Tahan, M. Gagnon. 2016. « Maintenance strategy in fatigue based on the Hasofer Lind reliability index ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Claude Hudon, Melanie Lévesque. 2016. « A hydrogenerator model-based failure detection framework to support asset management ». 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016) Piscataway, NJ, USA : IEEE.

P. Cambron, R. Lepvrier, C. Masson, A. Tahan, F. Pelletier. 2016. « Power curve monitoring using weighted moving average control charts ». Renewable Energy. vol. 94 p. 126-135.

Q. Chatenet, A. Tahan, M. Gagnon, J. Chamberland-Lauzon. 2016. « Numerical model validation using experimental data: Application of the area metric on a Francis runner ». 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016) IOP Publishing.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2016. « Bayesian network as an adaptive parameter setting approach for genetic algorithms ». Complex & Intelligent Systems. vol. 2 , nº 1. p. 1-22.

I. Diagne, M. Gagnon, A. Tahan. 2016. « Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ». 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016) UK : IOP Publishing Ltd..

I. Jbira, M. Tlija, B. Louhichi, A. Tahan. 2016. « CAD/Tolerancing integration: mechanical system with geometric defects ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

A. Joubair, A. S. Tahan, I. A. Bonev. 2016. « Performances of observability indices for industrial robot calibration ». IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016) p. 2477-2484. IEEE.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2016. « Automatic fixtureless inspection of non-rigid parts based on filtering registration points ». International Journal of Advanced Manufacturing Technology. vol. 87 , nº 1. p. 687-712.

M. Kedadouche, M. Thomas, A. Tahan. 2016. « A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ». Mechanical Systems and Signal Processing. vol. 81 p. 88-107.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2016. « Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014) p. 151-165. Springer International Publishing.

Marc Jr. Lépine, Antoine S. Tahan. 2016. « The relationship between geometrical complexity and process capability ». Journal of Manufacturing Science and Engineering. vol. 138 , nº 5. 13 p.

Francis Pelletier, Christian Masson, Antoine Tahan. 2016. « Wind turbine power curve modelling using artificial neural network ». Renewable Energy. vol. 89 p. 207-214.

Antoine Proteau, S.-Antoine Tahan, Roland Maranzana, Pascal Lavoie. 2016. « Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ». 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent François, Souheil-Antoine Tahan. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) ( Montréal, QC, Canada, 4 mai 2016 )

Guillaume Boivin, Martin Viens, Pierre Belanger. 2016. « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing.

Ehsan Mohseni, Martin Viens, Demartonne R. Franca. 2016. « A model-based study of the effect of semi-elliptical surface notch geometry on the signal of a Split-D eddy current probe ». NDT Canada 2016 (Burlington, ON, Canada, Nov. 15-17, 2016) CINDE.

Christophe Travaglini, Christophe Bescond, Dermartonne Ramos Franca, Silvio E. Kruger, Martin Viens, Pierre Bélanger. 2016. « Scattering of high order guided wave modes around a through-thickness circular hole ». 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) AIP Publishing.

M. Daoud, J. F. Chatelain, A. Bouzid. 2015. « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology. vol. 81 , nº 9-12. p. 1987-1997.

M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015. « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology. vol. 77 , nº 9-12. p. 2019-2033.

Guillaume Mullier, Jean-François Chatelain. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering. vol. 9 , nº 8. p. 1509-1516.

Guillaume Mullier, Jean-François Chatelain. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)

Guillaume Mullier, Jean-François Chatelain. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) ( Barcelona, Spain, Aug. 17-18, 2015 )

Sy Quy Nguyen, Jean-Francois Chatelain. 2015. « Study of the milling process for thin components using a flexible setup configuration ». Applied Mechanics and Materials. vol. 704 p. 27-31.

Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinksi. 2015. « A new approach for surface profile roughness characterization in the laminated composite ply plane ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015) Canadian Aeronautics and Space Institute.

Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinski. 2015. « Surface condition of high speed trimming of CFRP ». 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)

Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015. « Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)

Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015. « Tool wear impact on surface roughness condition of CFRP high speed trimming ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)

M. Slamani, J. F. Chatelain. 2015. « High-speed robotic trimming of CFRP ». In Machinability of Fibre-Reinforced Plastics Coll. «Advanced Composites», . p. 83-101. De Gruyter.

Mohamed Slamani, Jean-François Chatelain. 2015. « Issues and challenges in robotic trimming of CFRP ». ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015) p. 400-405. SciTePress.

Mohamed Slamani, Jean-François Chatelain. 2015. « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics ( Colmar, Alsace, France, July 21-23, 2015 )

Mohamed Slamani, Jean-François Chatelain, Hossein Hamedanianpour. 2015. « Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ». International Journal of Material Forming. vol. 8 , nº 2. p. 305-316.

Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2015. « A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ». Measurement: Journal of the International Measurement Confederation. vol. 59 p. 268-283.

V. Demers, S. Turenne, O. Scalzo. 2015. « Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ». Journal of Materials Science. vol. 50 , nº 7. p. 2893-2902.

Vincent Demers, Sylvain Turenne, Orlando Scalzo. 2015. « Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ». Advanced Powder Technology. vol. 26 , nº 3. p. 997-1004.

F. Fareh, V. Demers, S. Turenne, O. Scalzo. 2015. « Segregation measurement of Inconel 718 feedstocks used in low-pressure metal injection molding ». Communication lors de la conférence : International Conference on Advanced materials engineering & technology (ICAMET 2015) ( Kaohsiung, Taiwan, Dec. 4-6, 2015 )

S. Prokoshkin, V. Brailovski, K. Inaekyan, V. Demers, A. Kreitcberg. 2015. « Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ». Shape Memory and Superelasticity. vol. 1 , nº 2. p. 191-203.

Clodualdo Aranas, Rupanjit Grewal, Kanwal Chadha, Davood Shahriari, Mohammad Jahazi, John J. Jonas. 2015. « Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015) p. 613-620. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.

T. Belhadj, V. Songmene, M. Jahazi. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL ( Chicoutimi, QC, Canada, 11 nov. 2015 )

K. Chadha, D. Shahriari, M. Jahazi. 2015. « Constitutive modelling of ingot breakdown process of low alloy steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015) Associazione Italiana di Metallurgia.

Kanwal Chadha, Pinaki Prasad Bhattacharjee, Mohammad Jahazi. 2015. « The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ». Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015) p. 107-114. Minerals, Metals and Materials Society.

Kanwal Chadha, Mohammad Jahazi, Abdelhalim Loucif, Davood Shahriari. 2015. « Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ». 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)

A. Chamanfar, M. Jahazi, A. Bonakdar, E. Morin, A. Firoozrai. 2015. « Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ». Materials Science and Engineering: A. vol. 642 p. 230-240.

A. Chamanfar, Mohammad Jahazi, J. Cormier. 2015. « A review on inertia and linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 46 , nº 4. p. 1639-1669.

A. Chamanfar, Mohammad Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2015. « Analysis of integrity and microstructure of linear friction welded Waspaloy ». Materials Characterization. vol. 104 p. 149-161.

Samir Mourad Chentouf, T. Belhadj, N. Bombardier, M. Jahazi. 2015. « Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ». 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)

H. Ghasemi Nanesa, Mohammad Jahazi. 2015. « Alternative phase transformation path in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A. vol. 634 p. 32-36.

Hadi Ghasemi-Nanesa, Mohammad Jahazi, Reza Naraghi. 2015. « Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ». Journal of Materials Science. vol. 50 , nº 17. p. 5758-5768.

Abdelhalim Loucif, Emna Ben Fredj, Mohammad Jahazi, Louis-Philippe Lapierreboire, Rami Tremblay, Raymond Beauvais. 2015. « Analysis of macrosegregation in large size forged ingot of high strength steel ». Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015) p. 1043-1046. Chinese Society for Metals.

Ilyes Maamri, Noureddine Barka, Abderrazak El Ouafi, Mohammad Jahazi. 2015. « A sensitivity study of 4340 steel hardness profile heat-treated by laser ». International Journal of Emerging Technology and Advanced Engineering. vol. 5 , nº 9. p. 7-13.

Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015. « On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) p. 641-642. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.

Hadi Ghasemi Nanesa, Mohammad Jahazi, Tom Levasseur. 2015. « Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ». International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015) p. 735-736. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.

D. Shahriari, Abdelhalim Loucif, Mohammad Jahazi, R. Tremblay, R. Beauvais. 2015. « 3D numerical simulation of solidification of large size ingots of high strength steels ». 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)

A. Tongne, Mohammad Jahazi, E. Feulvarch, C. Desrayaud. 2015. « Banded structures in friction stir welded Al alloys ». Journal of Materials Processing Technology. vol. 221 p. 269-278.

Amèvi Tongne, Christophe Desrayaud, Mohammad Jahazi, Eric Feulvarch. 2015. « Analytical modeling of material flow in friction stir welding ». 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)

Elmira Moosavi-Khoonsari, Pierre Hudon, In-Ho Jung. 2015. « Experimental investigation and thermodynamic optimization of the Na2O-FeO-Fe2O3-Al2O3-SiO2 system ». Communication lors de la conférence : AGU-GAC-MAC-CGU Joint Assembly ( Montreal, QC, Canada, May 03-07, 2015 )

D-D. Dang, X. T. Pham. 2015. « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC 2015) (Waterloo, ON, Canada, June 7-12, 2015)

Hugues Lessard, Gilbert Lebrun, Abdelhaq Benkaddour, Xuan-Tan Pham. 2015. « Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ». Composites Part A: Applied Science and Manufacturing. vol. 70 p. 59-68.

Fatemeh Mirakhorli, Xinjin Cao, Xuan Tan Pham, Priti Wanjara, Jean-Luc Fihey. 2015. « Hybrid laser-arc welding of cast martensitic stainless steel CA6NM: Post-weld tempered microstructure and mechanical properties ». Conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)

Hong-Den Nguyen, Martin Deshaies, Xuan-Tan Pham. 2015. « Simulation-assisted mold design for forming of thermoplastic PPS/ carbon fiber composites ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 18-21, 2015)

T. Hamon, R. Pellerin, Louis Rivest. 2015. « La conduite de projets de transformation de processus dans le secteur aérospatial : une revue critique des méthodologies de réingénierie ». 2e Conférence internationale en gestion de projet de l’UQTR (Trois-Rivières, QC, Canada, 28-29 mai 2015)

Romain Pinquié, Louis Rivest, Frédéric Segonds, Philippe Véron. 2015. « An illustrated glossary of ambiguous PLM terms used in discrete manufacturing ». International Journal of Product Lifecycle Management. vol. 8 , nº 2. p. 142-171.

A. Bahloul, A. Djebara, M. N. Saidi, V. Songmene. 2015. « Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ». Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015) p. 598-605. International Conference on Industrial Ventilation.

Mathieu Carrier, Mathieu Dansereau, Julio Fernandes, Jean-Sébastien Mérette, Yvan Petit, Victor Songmene. 2015-05-12. « Alésoir acétabulaire ».

Kouedeu Annie Francie, Kenne Jean-Pierre, Dejax Pierre, Songmene Victor, Polotski Vladimir. 2015. « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Journal of Manufacturing Systems. vol. 37 , nº Part 3. p. 662-671.

Jules Kouam, Victor Songmene, Marek Balazinski, Patrick Hendrick. 2015. « Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ». International Journal of Advanced Manufacturing Technology. vol. 79 , nº 5. p. 1325-1334.

A. F. Kouedeu, J.-P. Kenné, P. Dejax, V. Songmene, V. Polotski. 2015. « Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ». International Journal of Advanced Manufacturing Technology. vol. 76 , nº 9. p. 1607-1619.

Seyed Ali Niknam, Victor Songmene. 2015. « Milling burr formation, modeling and control: A review ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. vol. 229 , nº 6. p. 893-909.

M. N. Saidi, Victor Songmene, J. Kouam, A. Bahloul. 2015. « Experimental investigation on fine particle emission during granite polishing process ». International Journal of Advanced Manufacturing Technology. vol. 81 , nº 9. p. 2109-2121.

Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2015. « Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ». «Studies and Research Projects» IRSST. 82 p.

Victor Songmene, R. Njoya Doko. 2015. « Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ». Materials Science Forum. 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015) p. 381-388. Switzerland : Trans Tech Publications.

Gad N. Abenhaim, Alain Desrochers, Antoine S. Tahan, Jean Bigeon. 2015. « A finite-element boundary condition setting method for the virtual mounting of compliant components ». Journal of Computing and Information Science in Engineering. vol. 15 , nº 4. 8 p.

Gad N. Abenhaim, Alain Desrochers, S.-Antoine Tahan, Jean Bigeon. 2015. « A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ». CAD Computer Aided Design. vol. 62 p. 248-258.

Ali Aidibe, Antoine Tahan. 2015. « The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ». 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014) p. 84-89. Elsevier.

Ali Aidibe, S.-Antoine Tahan. 2015. « Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ». International Journal of Advanced Manufacturing Technology. vol. 79 , nº 5. p. 831-841.

Jérémy Arpin-Pont, Martin Gagnon, S.-Antoine Tahan, André Coutu, Denis Thibault. 2015. « Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ». Journal of Strain Analysis for Engineering Design. vol. 50 , nº 1. p. 40-50.

Olivier Blancke, Normand Amyot, Claude Hudon, Mélanie Lévesque, Antoine Tahan. 2015. « A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ». Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015) PHM Society.

H. H. Boukani, S. M. Chentouf, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2015. « The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ». AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014) p. 909-916. USA : AIP - American Institute of Physics.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, R. Sabourin. 2015. « Evaluation of genotypic diversity measurements exploited in real-coded representation ». arXiv. 13 p.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2015. « A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ». Mechanics and Industry. vol. 16 , nº 6. 15 p.

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ». 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014) EDP Sciences.

Mourad Kedadouche, Marc Thomas, Antoine Tahan, Raynald Guilbault. 2015. « Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ». Shock and Vibration. vol. 2015 12 p.

Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015. « Analysis and optimization of a new differentially driven cable parallel robot ». Journal of Mechanisms and Robotics. vol. 7 , nº 3. 6 p.

Hamed Khakpour, Lionel Birglen, Souheil-Antoine Tahan. 2015. « Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ». International Journal of Advanced Manufacturing Technology. vol. 77 , nº 5. p. 1167-1176.

Borhen Louhichi, Gad N. Abenhaim, Antoine S. Tahan. 2015. « CAD/CAE integration: updating the CAD model after a FEM analysis ». International Journal of Advanced Manufacturing Technology. vol. 76 , nº 1. p. 391-400.

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015. « An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ». 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)

Sasan Sattarpanah Karganroudi, Jean-Christophe Cuillière, Vincent Francois, Souheil-Antoine Tahan. 2015. « Inspection automatique de pièces flexibles sans gabarit de conformité ». Affiche présentée lors de la conférence : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) ( Trois-Rivières, QC, Canada, 25-26 mars 2015 )

Lionel Birglen, Benoit Leblanc, Xavier Maldague, Iraj Mantegh, Sylvain Roberge, Martin Viens, Wen-fang Xie. 2015. « Introduction of a robotic system for aerospace manufacturing: The case for non-destructive inspection and beyond ». 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 19-21, 2015)

P-C. Ostiguy, M. H. Sherafat, D. R. Franca, N. Bouslama, N. Quaegebeur, A. Maslouhi, L. Lessard, P. Hubert, M. Viens, M. R. Mofakhami, Z. Hajjar, P. Masson. 2015. « Selection of structural features for the systematic study of guided wave propagation and interaction with damage ». Structural health monitoring 2015 : System Reliability for Verification and Implementation (Stanfort, CA, USA, Sept. 1-3, 2015) p. 1973-1980. Destech Publications.

J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2015. « Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ». Insight: Non-Destructive Testing and Condition Monitoring. vol. 57 , nº 1. p. 18-24 and 34.

M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014. « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) p. 25-36. WITPress.

Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014. « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2014. « Experimental investigation to study cutting temperature during milling of unidirectional Carbon Fiber Reinforced Plastic ». ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014, November 14, 2014 - November 20, 2014 (Montreal, QC, Canada, Nov. 14-20, 2014) Montreal, QC, Canada : American Society of Mechanical Engineers (ASME).

Walid Jomaa, Monzer Daoud, Victor Songmene, Philippe Bocher, Jean-François Châtelain. 2014. « Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2014. « Analysis of trajectory deviation during high speed robotic trimming of carbon-fiber reinforced polymers ». Robotics and Computer-Integrated Manufacturing. vol. 30 , nº 5. p. 546-555.

Noureddine Barka, Ahmed Chebak, Abderrazak El Ouafi, Mohammad Jahazi, Abdellah Menou. 2014. « A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ». Journal of Materials Engineering and Performance. vol. 23 , nº 9. p. 3092-3099.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2014. « Evolution of flow stress and microstructure during isothermal compression of Waspaloy ». Materials Science and Engineering A. vol. 615 p. 497-510.

S. M. Chentouf, M. Jahazi, L. P. Lapierre-Boire, S. Godin. 2014. « Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ». Metallography, Microstructure, and Analysis. vol. 3 , nº 4. p. 281-297.

Samir Mourad Chentouf, Mohammad Jahazi, Rejean Fortin. 2014. « Influence of the quench process on microstructure evolution in a landing gear steel ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Mostafa Dadaei, Hamid Omidvar, Behrouz Bagheri, Mohammad Jahazi, Mahmoud Abbasi. 2014. « The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ». International Journal of Materials Research. vol. 105 , nº 4. p. 369-374.

Gholam Reza Ebrahimi, Amir Momeni, Mohammad Jahazi, Philippe Bocher. 2014. « Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 45 , nº 4. 13 p. p. 2219-2231.

Hadi Ghasemi-Nanesa, Mohammad Jahazi. 2014. « Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering A. vol. 598 p. 413-419.

Hadi Ghasemi-Nanesa, Mohammad Jahazi, Gil Trigo, Tom Levasseur. 2014. « Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ». TMS 2014 Supplemental Proceedings p. 991-997. Hoboken, NJ, USA : John Wiley & Sons, Inc..

R. Keivani, Mohammad Jahazi, Tan Pham, A. R. Khodabandeh, M. R. Afshar. 2014. « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology. vol. 73 , nº 1-4. p. 409-419.

Fatemeh Masoumi, Mohammad Jahazi, J. Cormier, D. Shahriari. 2014. « Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ». 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014)

A. Momeni, G. R. Ebrahimi, Mohammad Jahazi, Philippe Bocher. 2014. « Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ». Journal of Alloys and Compounds. vol. 587 p. 199-210.

A. Rosenbaum, A. Chamanfar, Mohammad Jahazi, A. Bonakdar. 2014. « Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ». Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014) American Society of Mechanical Engineers (ASME).

Emad Salari, Mohammad Jahazi, Alireza Khodabandeh, Hadi Ghasemi-Nanesa. 2014. « Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ». Materials and Design. vol. 58 p. 381-389.

H. Touazine, Mohammad Jahazi, Philippe Bocher. 2014. « Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Pierre Hudon, Dong-Geun Kim, Bikram Konar, Elmira Moosavi-Khoonsari, In-Ho Jung. 2014. « Challenges in experimental phase diagram determinations of oxide systems ». Communication lors de la conférence : Advances on Computational Thermodynamics ( Montebello, QC, Canada, 2014 )

Elmira Moosavi-Khoonsari, In-Ho Jung. 2014. « A coupled experimental study and thermodynamic modeling of the Na2O-FeO-Fe2O3-Al2O3 system ». Affiche présentée lors de la conférence : Advances on Computational Thermodynamics ( Montebello, QC, Canada, 2014 )

Elmira Moosavi‐Khoonsari, In‐Ho Jung. 2014. « A coupled experimental study and thermodynamic modeling of the Na2O‐FeO‐Fe2O3‐Al2O3 system ». Affiche présentée lors de la conférence : CALPHAD XLIII : Computer Coupling of Phase Diagrams and Thermochemistry ( Changsha, Hunan, China, June 01-06, 2014 )

Elmira Moosavi‐Khoonsari, In‐Ho Jung. 2014. « Development of a thermodynamic database for the Na2O‐FeO‐Fe2O3‐SiO2‐S system for the de‐sulfurization of molten steel ». Communication lors de la conférence : CALPHAD XLIII : Computer Coupling of Phase Diagrams and Thermochemistry ( Changsha, Hunan, China, June 01-06, 2014 )

F. Mirakhorli, X. Cao, Tan Pham, P. Wanjara, Jean-Luc Fihey. 2014. « Hybrid fiber laser-arc welding of 10-mm thick CA6NM stainless steel ». Materials Science and Technology Conference and Exhibition 2014, MS and T 2014 (Pittsburgh, PA, USA, Oct. 12-16, 2014) p. 1891-1900. Association for Iron and Steel Technology, AISTECH.

Phuong Nguyen-Tri, Rachid El Aidani, Étienne Leborgne, Tan Pham, Toan Vu-Khanh. 2014. « Chemical ageingaging of a polyester nonwoven membrane used in aerosol and drainage filter ». Polymer Degradation and Stability. vol. 101 , nº 1. p. 71-80.

Guillaume Bolduc, Louis Rivest. 2014. « Structural steel truck loading problem: documenting expert loaders reasoning ». Proceedings of the 2014 International Conference on Innovative Design and Manufacturing (ICIDM) (Montreal, QC, Canada, Aug. 13-15, 2014) p. 41-46. Piscataway, N. J., USA : IEEE.

M. Bricogne, Louis Rivest, N. Troussier, B. Eynard. 2014. « Concurrent versioning principles for collaboration: towards PLM for hardware and software data management ». International Journal of Product Lifecycle Management. vol. 7 , nº 1. p. 17-37.

Borhen Louhichi, Louis Rivest. 2014. « Maintaining consistency between CAD elements in collaborative design using association management and propagation ». Computers in Industry. vol. 65 , nº 1. p. 124-135.

Erik Poirier, Gulnaz Aksenova, Pierre Collot, Louis Rivest, Daniel Forgues, Sylvie Doré. 2014. « Transitioning to building information modeling and product lifecycle management in the Quebec construction industry: challenges, possible solutions and proposed action items ». Montréal. «BIM & PLM Workshop» École de technologie supérieure.

Louis Rivest. 2014. « Editorial ». International Journal of Product Lifecycle Management. vol. 7 , nº 1. 2 p. p. 1-2.

Abdelhakim Djebara, Ali Bahloul, Bernard Wenga Ntcheping, Victor Songmene. 2014. « Dilution method to characterize fine and ultrafine particle at high concentrations ». Conference Proceedings : 1st International Conference on Atmospheric Dust : DUST 2014 (Castellaneta Marina, Italy, June 1-6, 2014) p. 312-317. Digilabs Publishing.

Abdelhakim Djebara, Ali Bahloul, Victor Songmene. 2014. « Technique de dilution des concentrations de la poussière émise lors de la transformation des matériaux ». 36e Congrès de l'AQHSST :Bien s'outiller pour intervenir: se développer, se spécialiser, se renouveler : Congrès de l'Association québécoise pour l’hygiène, la santé et la sécurité du travail (Beaupré, QC, Canada, 7-9 mai 2014) Association québécoise pour l’hygiène, la santé et la sécurité du travail.

W. Jomaa, Victor Songmene, Philippe Bocher. 2014. « Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 ». Materials. vol. 7 , nº 3. p. 1603-1624.

Walid Jomaa, Victor Songmene, Philippe Bocher. 2014. « Material behavior modeling during high speed machining of 6061-T6 and 7075-T651 alloys ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) ( Sherbrooke, QC, Canada, Nov. 18, 2014 )

R. Kamguem, S.-Antoine Tahan, Victor Songmene. 2014. « Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ». International Journal of Materials Forming and Machining Processes. vol. 1 , nº 1. p. 48-72.

Jules Kouam, Abdelhakim Djebara, Victor Songmene. 2014. « Experimental investigation on the effect of pre-holes on drilling process performance of aluminum alloys: forces, surface finish and dust emission ». Advances in Materials Science and Applications. vol. 3 , nº 1. p. 13-23.

A. F. Kouedeu, J. P. Kenné, P. Dejax, V. Songmene, V. Polostki. 2014. « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) ( Sherbrooke, QC, Canada, Nov. 18, 2014 )

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014. « Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ». Applied Mathematics. vol. 5 , nº 10. p. 1557-1572.

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2014. « Stochastic optimal control of manufacturing systems under production-dependent failure rates ». International Journal of Production Economics. vol. 150 p. 174-187.

S. A. Niknam, Victor Songmene. 2014. « Analysis of friction and burr formation in slot milling ». 47th CIRP Conference on Manufacturing Systems, CMS 2014 (Windsor, Canada, Apr. 28-30, 2014) p. 755-759. Elsevier.

S. A. Niknam, Victor Songmene. 2014. « Analytical modelling of slot milling exit burr size ». International Journal of Advanced Manufacturing Technology. vol. 73 , nº 1-4. p. 421-432.

Seyed A. Niknam, Walery Wygowski, Marek Balazinksi, Victor Songmene. 2014. « Milling burr formation and avoidance ». In Machinability of Advanced Materials . p. 57-93. John Wiley & Sons, Inc..

Seyed Ali Niknam, Raid Khettabi, Victor Songmene. 2014. « Machinability and machining of titanium alloys: a review ». In Machining of Titanium Alloys Coll. «Materials Forming, Machining and Tribology», . p. 1-30. Springer-Verlag Berlin Heidelberg.

Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2014. « Machining burrs formation & deburring of aluminium alloys ». In Light metal alloys applications . p. 99-122. InTech publication.

Mohamed Nejib Saidi, Victor Songmene, Jules Kouam. 2014. « Design, fabrication and testing of a polishing tool adaptable to machine-tools ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) ( Sherbrooke, QC, Canada, Nov. 18, 2014 )

Victor Songmene. 2014. « Outillage - optimisation d'usinage ». Communication lors de la conférence : 1re édition de l'évènement Alliance Monde Polymères ( Lévis, QC, Canada, 11-12 février 2014 )

Victor Songmene, Riad Khettabi, Martin Viens, Jules Kouam, Stéphane Hallé, François Morency, Jacques Masounave, Abdelhakim Djebara. 2014. « Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ». Montréal, Québec, Canada. «Études et recherches» IRSST. 93 p.

Ali Aidibe, Antoine Tahan. 2014. « The inspection of deformable bodies using curvature estimation and Thompson-Biweight test ». International Journal of Advanced Manufacturing Technology. vol. 71 , nº 9-12. p. 1733-1747.

H. H. Boukani, Martin Viens, S.-Antoine Tahan, M. Gagnon. 2014. « On the performance of nondestructive testing methods in the hydroelectric turbine industry ». 27th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2014) (Montreal, QC, Canada, Sept. 22-26, 2014) IOP Publishing.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2014. « Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study ». Structural Safety. vol. 50 p. 1-8.

M. Kedadouche, M. Thomas, A. Tahan. 2014. « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». Mechanics & Industry. vol. 15 , nº 6. p. 467-476.

M. Kedadouche, Marc Thomas, Antoine Tahan. 2014. « Monitoring machines by using a hybrid method combining MED, EMD, and TKEO ». Advances in Acoustics and Vibration. vol. 2014

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2014. « Empirical mode decomposition of acoustic emission for early detection of bearing defects ». Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy, ) p. 367-377. Springer Berlin Heidelberg.

H. Khakpour, L. Birglen, S.-Antoine Tahan. 2014. « Synthesis of differentially driven planar cable parallel manipulators ». IEEE Transactions on Robotics. vol. 30 , nº 3. p. 619-630.

H. Khakpour, L. Birglenl, S.-Antoine Tahan, F. Paquet. 2014. « Experimental study on abrasive waterjet polishing of hydraulic turbine blades ». 27th IAHR Symposium on Hydraulic Machinery and Systems, IAHR 2014 (Montreal, QC, Canada, Sept. 22-26, 2014) Institute of Physics Publishing.

Borhen Louhichi, Mehdi Tlija, Abdelmajid Benamara, Antoine Tahan. 2014. « An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ». CAD Computer Aided Design. vol. 62 p. 259-274.

Hassan Radvar-Esfahlan, S.-Antoine Tahan. 2014. « Robust generalized numerical inspection fixture for the metrology of compliant mechanical parts ». International Journal of Advanced Manufacturing Technology. vol. 70 , nº 5-8. p. 1101-1112.

P. Masson, A. Maslouhi, P. Micheau, N. Quaegebeur, L. Lessard, P. Hubert, M. Viens, S. Kruger, M. R. Mofakhami, J. Pinsonnault, Z. Hajjar, P-C. Ostiguy, M. Sherafat, D. Ramos Franca. 2014. « Characterization of guided wave propagation in aircraft structures ». Affiche présentée lors de la conférence : 1er Forum du Réseau national | 7e Forum du CRIAQ ( Montreal, QC, Canada, Apr. 16-17, 2014 )

S. B. Ghafarizadeh, J. F. Chatelain, G. Lebrun. 2013. « Multi axis machining of high performance CFRP for aerospace industry ». 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013) p. 4027-4034. International Committee on Composite Materials.

Hossein Hamedanianpour, Jean-François Chatelain. 2013. « Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming ». Manufacturing Engineering and Process II (Vancouver, B.C., Canada, Apr. 13-14, 2013) p. 34-39. Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.

Melissa Anderson, Javad Gholipour, Florent Bridier, Philippe Bocher, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2013. « Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ». Transactions of the Canadian Society for Mechanical Engineering. vol. 37 , nº 1. p. 39-52.

Mahyar Asadi, Dominic Guillot, Arnaud Weck, Ashok K. Koul, Ahmad Chamanfar, Mohammad Jahazi. 2013. « Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) New York, NY, USA : American Society of Mechanical Engineers.

M. Bensalah, A. Chamanfar, S. Chentouf, M. Jahazi. 2013. « The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ». Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013) Curran.

N. Boutana, P. Bocher, M. Jahazi. 2013. « Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ». International Journal of Fatigue. vol. 51 p. 49-56.

A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A. K. Koul. 2013. « Microstructural characteristics of forged and heat treated Inconel-718 disks ». Materials and Design. vol. 52 p. 791-800.

Ahmad Chamanfar, Mohammad Jahazi, Javad Gholipour, Priti Wanjara, Stephen Yue. 2013. « Modeling grain size and strain rate in linear friction welded Waspaloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. vol. 44 , nº 9. p. 4230-4238.

F. Jalilian, M. Jahazi, R. A. L. Drew. 2013. « Microstructure evolution during transient liquid phase bonding of alloy 617 ». Metallography, Microstructure, and Analysis. vol. 2 , nº 3. p. 170-182.

A. R. Maldar, G. R. Ebrahimi, Meysam Haghshenas, M. Jahazi, P. Bocher. 2013. « Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ». Journal of Materials Engineering and Performance. vol. 22 , nº 11. p. 3306-3314.

D. Shahriari, A. Zolfaghari, Mohammad Jahazi, Philippe Bocher. 2013. « Development of an expert system to characterize weld defects identified by ultrasonic testing ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) New York, NY, USA : American Society of Mechanical Engineers.

In-Ho Jung, Pierre Hudon, Wan-Yi Kim, Marie-Aline Van Ende, Miftaur Rahman, Gabriel Garcia Curiel, Elmira Moosavi-Khoonsari. 2013. « Thermodynamic database of P2O5-containing oxide systems for the dephosphorization process in steelmaking ». Proceedings of the Ninth International Conference on Molten Slags, Fluxes and Salts (MOLTEN 12) (Beijing, China, May 27-30, 2012)

Elmira Moosavi-Khoonsari, In-Ho Jung. 2013. « Thermodynamic modeling of the Na2O-FeO-Fe2O3-SiO2 system ». Affiche présentée lors de la conférence : Materials Science & Technology Conference and Exhibition (MS&T13) ( Montreal, QC, Canada, Oct. 27-31, 2013 )

Quang Hien Bui, Xuan Tan Pham, Mario Fafard. 2013. « Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas ». International Journal of Plasticity. vol. 50 p. 127-145.

Mathieu Gendron, Eric Boudreault, Bruce Hazel, Henri Champliaud, Tan Pham. 2013. « Temperature profile optimization in a new robotic local induction heat treatment process ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) p. 766-773. Warrendale, PA, USA : Association for Iron and Steel Technology.

K. Kouwonou, X. T. Pham, G. Lebrun. 2013. « Modeling and characterization of thermoplastic composites peek/carbon ». Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013)

Hugues Lessard, Gilbert Lebrun, Xuan-Tan Pham. 2013. « Experimental evaluation of the thermo-stamping process for a 3d composite part made of unidirectional cf/peek prepregs ». 45th ISTC (Wichita, KS, USA, Oct. 21-24, 2013) SAMPE.

Tan Pham, G. Pradinc, X. Cao, J. L. Fihey. 2013. « Modeling of moving heat sources using meshless element free galerkin method ». ASM Proceedings of the International Conference: Trends in Welding Research (Chicago, IL, USA, June 4-8, 2012) p. 746-751. OH, USA : ASM International.

Xuan-Tan Pham. 2013. « Analyse thermique de Rosenthal par la méthode meshless element free Galerkin ». Communication lors de la conférence : Séminaire "Modélisation avancée des cuves d'électrolyse et efficacité énergétique'' de la Chaire de recherche industrielle CRSNG/Alcoa sur la modélisation avancée des cuves d'électrolyse et l'efficacité énergétique, Université Laval ( Québec, QC, Canada, 16 mai 2013 )

Xuan-Tan Pham. 2013. « Simulation numérique du soudage par éléments finis avec Sysweld ». Communication lors de la conférence : Symposoud 2013. Ensembles soudés: de la conception à la fabrication ( Varennes, QC, Canada, 30-31 mai 2013 )

Xuan-Tan Pham. 2013. « Two-dimensional rosenthal moving heat source analysis using the meshless element free Galerkin method ». Numerical Heat Transfer; Part A: Applications. vol. 63 , nº 11. p. 807-823.

G. Pradinc, X-T. Pham, X. Cao, J-L. Fihey, L. Mathieu. 2013. « An experimentally assisted numerical simulation of metal forming for thick and heavy plates by line heating ». Communication lors de la conférence : Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) ( Montreal, QC, Canada, Oct. 27-31, 2013 )

V. Sabri, S.-Antoine Tahan, X. T. Pham, H. Radvar-Esfahlan, B. Louhichi, A. M. Tahvilian. 2013. « Fixtureless profile inspection of non-rigid parts ». Proceedings of International Conference on Computers and Industrial Engineering, CIE (Hong Kong, China, Oct. 16-18, 2013) p. 86-97. Curran Associates Inc..

Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2013. « 3D CAD model comparison: An evaluation of model difference identification technologies ». Computer-Aided Design and Applications. vol. 10 , nº 2. p. 173-195.

A. Djebara, A. Bahloul, V. Songmene. 2013. « Émission et dispersion de particules lors de l'usinage à sec d'alliages d'aluminium ». Proceedings of the 12th International Aluminum Conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)

A. Djebara, W. Jomaa, A. Bahloul, V. Songmene. 2013. « Dust emission during dry machining of aeronautic aluminum alloys ». Proceedings of 1st International Conference on Aeronautics Sciences (ICAS) (Oran, Algeria, May 27-28, 2013) ICAS.

A. Djebara, Victor Songmene. 2013. « Dry machining of aluminum alloys and air quality ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) p. 135-139. Springer Science and Business Media, LLC.

A. Djebara, Y. Zedan, Jules Kouam, Victor Songmene. 2013. « The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ». Journal of Materials Engineering and Performance. vol. 22 , nº 12. p. 3840-3853.

Abdelhakim Djebara, Victor Songmene, Ali Bahloul. 2013. « Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ». Health. vol. 5 , nº 10A2. 8 p. p. 36-43.

W. Jomaa, Victor Songmene, Philippe Bocher. 2013. « On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel ». Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) p. 94-103. Warrendale, PA, USA : Association for Iron and Steel Technology.

R. Kamguem, A. Djebara, Victor Songmene. 2013. « Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ». International Journal of Advanced Manufacturing Technology. vol. 69 , nº 5-8. p. 1283-1298.

Rene Kamguem, Souheil Antoine Tahan, Victor Songmene. 2013. « Evaluation of machined part surface roughness using image texture gradient factor ». International Journal of Precision Engineering and Manufacturing. vol. 14 , nº 2. p. 183-190.

R. Khettabi, L. Fatmi, Jacques Masounave, Victor Songmene. 2013. « On the micro and nanoparticle emission during machining of titanium and aluminum alloys ». CIRP Journal of Manufacturing Science and Technology. vol. 6 , nº 3. p. 175-180.

Jules Kouam, Victor Songmene, Ali Bahloul. 2013. « Experimental investigation on PM2.5 particle emission during polishing of granite ». Health. vol. 5 , nº 10A2. 7 p. p. 29-35.

Jules Kouam, Victor Songmene, Yasser Zedan, AbdelHakim Djebara, Riad Khettabi. 2013. « On chip formation during drilling of cast aluminum alloys ». Machining Science and Technology. vol. 17 , nº 2. p. 228-245.

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene, Vladimir Polotski. 2013. « Analytical modelling and control of a hybrid manufacturing/remanufacturing system ». IFAC Proceedings Volumes. vol. 46 , nº 9. p. 401-406.

Annie Levasseur, Jérémie Ménard, Victor Songmene, Julio Fernandes, Yvan Petit. 2013. « Quality of reamed surface using serrated blades as compared to a convential acetabular reamer ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (San Diego, CA, USA, Nov. 15-21, 2013) p. ASME. American Society of Mechanical Engineers (ASME).

Sylvie Nadeau, Michèle Bouchard, Maximilien Debia, Nathalie DeMarcellis-Warin, Stéphane Hallé, Victor Songmene, Marie-Christine Therrien, Kevin Wilkinson, Barthelemy Ateme-Nguema, Genevieve Dufour, André Dufresne, Julien Fatisson, Sami Haddad, Madjid Hadioui, Jules Kouam, François Morency, Robert Tardif, Martin Viens, Scott Weichenthal, Claude Viau, Michel Camus. 2013. « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine. vol. 9 , nº 1. p. 22-24.

S. A. Niknam, V. Songmene. 2013. « Deburring and edge finishing of aluminum alloys : a review ». Proceedings of the 12th International Aluminum conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)

S. A. Niknam, Victor Songmene. 2013. « Modeling of burr thickness in milling of ductile materials ». International Journal of Advanced Manufacturing Technology. vol. 66 , nº 9-12. p. 2029-2039.

S. A. Niknam, Victor Songmene, Y. H. J. Au. 2013. « The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ». International Journal of Advanced Manufacturing Technology. vol. 69 , nº 9-12. p. 2679-2689.

Seyed Ali Niknam, Victor Songmene. 2013. « Experimental investigation and modeling of milling burrs ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) New York, N.Y., USA : American Society of Mechanical Engineers.

Seyed Ali Niknam, Victor Songmene. 2013. « Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. vol. 227 , nº 8. p. 1165-1179.

Seyed Ali Niknam, Victor Songmene. 2013. « Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ». International Journal of Precision Engineering and Manufacturing. vol. 14 , nº 8. p. 1311-1320.

Seyed Ali Niknam, Victor Songmene, Y. H. Joe Au. 2013. « Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ». Transactions of the Canadian Society for Mechanical Engineering. vol. 37 , nº 4. p. 1105-1114.

Yvan Petit, Julio Fernandes, Jean-Sébastien Mérette, Mathieu Dansereau, Victor Songmene, Mathieu Carrier. 2013-06-04. « Acetabular reamer ».

Stephane Segonds, Jacques Masounave, Victor Songmene, Christian Bes. 2013. « A simple analytical model for burr type prediction in drilling of ductile materials ». Journal of Materials Processing Technology. vol. 213 , nº 6. p. 971-977.

Victor Songmene, R. D. Njoya, B. T. Nkengue. 2013. « Machining performance of a graphitic SiC-aluminium matrix composite ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) p. 127-130. Springer Science and Business Media, LLC.

Imed Zaghbani, Victor Songmene, Ilian Bonev. 2013. « An experimental study on the vibration response of a robotic machining system ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. vol. 227 , nº 6. p. 866-880.

Y. Zedan, Victor Songmene, R. Khettabi, J. Kouam, Jacques Masounave. 2013. « Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions ». Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012) p. 131-134. Springer Science and Business Media, LLC.

Yasser Zedan, Victor Songmene, Jules Kouam, Jacques Masounave. 2013. « Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials. vol. 13 , nº 2-3. p. 231-252.

G. N. Abenhaim, A. Desrochers, Antoine S. Tahan. 2013. « An Investigation of the Repeatability of Nonrigid Parts Measurements: A Case Study of an Aluminum Panel ». 12th CIRP Conference on Computer Aided Tolerancing p. 105-111.

Gad N. Abenhaim, S. Antoine Tahan, Alain Desrochers, Jean-Francois Lalonde. 2013. « Aerospace panels fixtureless inspection methods with restraining force requirements; A technology review ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) Warrendale, PA, USA : SAE International.

Ali Aidibe, Antoine Tahan. 2013. « Curvature estimation for metrology of non-rigid parts ». ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013) New York, N.Y., USA : American Society of Mechanical Engineers.

Ali Aidibe, S. Antoine Tahan, Jean-Francois Lalonde. 2013. « A robust iterative displacement inspection algorithm for quality control of aerospace non-rigid parts without conformation jig ». SAE 2013 AeroTech Congress and Exhibition (AEROTECH) (Montreal, QC, Canada, Sept. 24-26, 2013) Warrendale, PA, USA : SAE International.

Ali Aidibe, S.-Antoine Tahan. 2013. « An inspection approach for nonrigid mechanical parts ». Manufacturing Science and Technology (ICMST2013) (Dubai, United Arab Emirates, Aug. 3-4, 2013) p. 806-811. Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2013. « Review of phenotypic diversity formulations for diagnostic tool ». Applied Soft Computing. vol. 13 , nº 1. p. 9-26.

B. Danouj, S.-Antoine Tahan, Éric David. 2013. « Using a new generation of piezoelectric sensors for partial discharge detection ». Measurement. vol. 46 , nº 1. p. 660-666.

M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2013. « On the fatigue reliability of hydroelectric Francis runners ». 5th International Conference on Fatigue Design, Fatigue Design 2013 (Senlis, France, Nov. 27-28, 2013) p. 565-574.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2013. « A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner ». International Journal of Fatigue. vol. 47 p. 300-307.

Mourad Kedadouche, Thameur Kidar, Marc Thomas, Antoine Tahan, Mohamed El Badaoui, Raynald Guilbault. 2013. « Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ». Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013) Chartres, France : Institute of Technology.

Mourad Kedadouche, Marc Thomas, Antoine Tahan. 2013. « Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects ». CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013) Reims, France : Université de Reims Champagne-Ardenne.

H. Radvar-Esfahlan, S.-Antoine Tahan. 2013. « Performance study of dimensionality reduction methods for metrology of nonrigid mechanical parts ». International Journal of Metrology and Quality Engineering. vol. 4 , nº 3. p. 193-200.

Baoguang Xu, W. F. Xie, Martin Viens, Ehsan Mohseni, Lionel Birglen, Iraj Mantegh. 2013. « Intelligent eddy current crack detection system design based on neuro-fuzzy logic ». Proceedings of the The NDT in Canada 2013 Conference in conjunction with the International Workshop on Smart Materials & Structures, SHM and NDT for the Energy Industry (Calgary, AB, Canada, Oct. 7-10, 2013)

J. Zheng, W. F. Xie, Martin Viens, L. Birglen, I. Mantegh. 2013. « Design of advanced automatic inspection system for turbine blade FPI analysis ». Review of Progress in Quantitative Nondestructive Evaluation (Denver, CO, USA, July 15-20, 2012) p. 612-619. USA : American Institute of Physics.

Jean-François Chatelain. 2012. « A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ». Journal of Management and Engineering Integration. vol. 5 , nº 1. p. 23-33.

Jean-François Chatelain, Jean-François Lalonde, Antoine S. Tahan. 2012. « Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ». International Journal of Mechanics. vol. 6 , nº 1. p. 43-51.

Jean-François Chatelain, Imed Zaghbani. 2012. « A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ». International Journal of Mechanics. vol. 6 , nº 1. p. 52-59.

Jean-François Chatelain, Imed Zaghbani, Joseph Monier. 2012. « Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ». World Academy of Science, Engineering & Technology. vol. 6 , nº 8. p. 988-994.

Benoit St-Pierre, Jean-François Chatelain, Louis Dufresne. 2012. « Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ». Transactions of the Canadian Society for Mechanical Engineering. vol. 36 , nº 2. p. 127-142.

Imed Zaghbani, Jean-Fraçois Chatelain, Victor Songmene, Sébastien Bérubé, Abdelatif Atarsia. 2012. « A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ». Journal of Composite Materials. vol. 46 , nº 16. p. 1955-1971.

Imed Zaghbani, Jean-François Chatelain, Sébastien Bérubé, Victor Songmene, Justin Lance. 2012. « Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ». International Journal of Machining and Machinability of Materials. vol. 12 , nº 4. p. 337-357.

Melissa Anderson, Philippe Bocher, Javad Gholipour, Mohammad Jahazi, Jean Savoie, Priti Wanjara. 2012. « Increasing the hydroformability of stainless steel 321 by multistep processing ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) p. 1243-1246. Krakow, Poland : Wiley-VCH Verlag.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012. « Maximizing the integrity of linear friction welded Waspaloy ». Materials Science and Engineering A. vol. 555 p. 117-130.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2012. « Suppressed liquation and microcracking in linear friction welded WASPALOY ». Materials and Design. vol. 36 p. 113-122.

L. Sarrat, A. Chamanfar, Mohammad Jahazi. 2012. « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future ( Paris, France, Nov. 12-15, 2012 )

Davood Shahriari, Iman Heidari, Kitae Kim, Mohammad Jahazi. 2012. « Welding temperature distribution in low carbon steel sheets by FDM and FEM ». Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) p. 607-610. Krakow, Poland : Wiley-VCH Verlag.

Abbas Tamadon, Ali Shokuhfar, Hossein Yoozbashizadeh, Mohammad Jahazi. 2012. « The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ». Advanced Processes in Materials. vol. 6 , nº 3 (22). p. 1-7.

S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012. « Microstructure and hardness control of a binary -TiAl alloy by heat treatment ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) p. 169-178. Applied Physics and Material Science (APMAS).

S. Zamani, H. Razavizadeh, Mohammad Jahazi. 2012. « The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ». 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012) p. 158-168. Applied Physics and Material Science (APMAS).

Elmira Moosavi-Khoonsari, In-Ho Jung. 2012. « Thermodynamic Modeling of Sulfide Capacity in Na2O-FetO-SiO2 system ». CS 2012 : Fifth International Congress on the Science and Technology of Steelmaking (Dresden, Germany, Oct. 01-03, 2012) Freiberg.

Louis Rivest, Abdelaziz Bouras, Borhen Louhichi. 2012. « Product Lifecycle Management. Towards Knowledge-Rich Enterprises IFIP WG 5.1 International Conference, PLM 2012, Montreal, QC, Canada, July 9-11, 2012, Revised Selected Papers ». Berlin, Heidelberg : Springer Berlin Heidelberg. 658 p.

Matthieu Bricogne, Louis Rivest, Nadege Troussier, Benoit Eynard. 2012. « Towards PLM for mechatronics system design using concurrent software versioning principles ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) p. 339-348. New York, NY : Springer New York.

Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2012. « Comparing 3D CAD models: Uses, methods, tools and perspectives ». Computer-Aided Design and Applications. vol. 9 , nº 6. p. 771-794.

Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2012. « Integration of explicit geometric constraints in the comparison of 3D CAD models for part design reuse ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) p. 445-457. New York, NY : Springer New York.

M. A. El Hani, Louis Rivest, Roland Maranzana. 2012. « Product data reuse in product development: A practitioner's perspective ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) p. 243-256. New York, NY : Springer New York.

B. Louhichi, M. Bruneau, Louis Rivest. 2012. « Transposition des associations et propagation des changements dans une maquette numérique ». Communication lors de la conférence : Deuxième Congrès Tunisien de Mécanique (COTUME) ( Sousse, Tunisie, 19-21 mars 2012 )

Borhen Louhichi, Louis Rivest. 2012. « Management of associations within digital mock-ups for improved collaboration ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) p. 411-423. New York, NY : Springer New York.

V. Quintana, L. Rivest, R. Pellerin, F. Kheddouci. 2012. « Re-engineering the engineering change management process for a drawing-less environment ». Computers in Industry. vol. 63 , nº 1. p. 79-90.

Virgilio Quintana, Louis Rivest, Robert Pellerin. 2012. « Measuring and improving the process of engineering change orders in a model–based definition context ». International Journal of Product Lifecycle Management. vol. 6 , nº 2. p. 138-160.

Louis Rivest, Abdelaziz Bouras, Borhen Louhichi. 2012. « IFIP Advances in Information and Communication Technology: Preface ». Product Lifecycle Management: Towards Knowledge-Rich Enterprises - IFIP WG 5.1 International Conference, PLM 2012, Revised Selected Papers (Montreal, QC, Canada, July 9-11, 2012) p. VI-VI. New York, NY : Springer New York.

M. Balazinski, V. Songmene, H. A. Kishawy. 2012. « Analyzing the machinability of metal matrix composites ». In Machining Technology for Composite Materials Coll. «Composites Science and Engineering», . p. 394-411. Woodhead Publishing.

A. Djebara, V. Songmene, J. Kouam, R. Khettabi. 2012. « An experimental investigation on dust emission during milling process using statistical analysis ». International Journal of Advances in Machining and Forming Operations. vol. 4 , nº 1. p. 15-37.

W. Jomaa, N. Ben Fredj, Victor Songemene, I. Zaghbani, C. Braham. 2012. « Hybrid machining versus hard turning-investigation on process induced residual stresses ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, May 28-June 01, 2012)

René Kamguem, Victor Songmene, Jean-Pierre Kenné, Souheil Antoine Tahan. 2012. « Vision-based surface roughness inspection of machined aluminium parts ». International Journal of Machining and Machinability of Materials. vol. 12 , nº 3. p. 215-235.

René Kamguem, Antoine Tahan, Bernard Wenga, Victor Songmene. 2012. « Non-contact Optical inspection of machined parts Surface Roughness ». 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)

J. Kouam, V. Songmene, M. Balazinski, P. Hendrick. 2012. « Dry, semi-dry and wet machining of 6061-T6 aluminium alloy ». In Aluminium Alloys - New Trends in Fabrication and Applications . p. 199-222. InTech.

J. Kouam, V. Songmene, A. Djebara, R. Khettabi. 2012. « Effect of friction testing of metals on particle emission ». Journal of Materials Engineering and Performance. vol. 21 , nº 6. p. 965-972.

Jules Kouam, Imed Zaghbani, Victor Songmene, Nick Parson, Alexandre Maltais. 2012. « Factors affecting the machinability of Al-Mg-Si extrusions ». Proceedings of the 10th International Aluminum Extrusion Technology Conference (ET '12) (Miami, FL, USA, May 15-18, 2012) Extrusion Technology for Aluminum Profiles Foundation.

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012. « A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ». 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Dejax, Victor Songmene. 2012. « The study of a deteriorating manufacturing system using simulation and response methodology ». 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012) p. 80-89. Italy : DIPTEM.

Annie Francie Kouedeu, Jean-Pierre Kenné, Pierre Delax, Victor Songmene. 2012. « Production planning of a two-machine manufacturing system with production dependent failure rates ». International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)

Seyed Ali Niknam, Rene Kamguem, Victor Songmene. 2012. « Analysis and optimization of exit burr size and surface roughness in milling using desirability function ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) p. 1797-1806. New York, N.Y., USA : American Society of Mechanical Engineers.

Seyed Ali Niknam, Victor Songmene. 2012. « Statistical investigation on burrs thickness during milling of 6061-T6 aluminium alloy ». 1st International Conference on Virtual Machining Process Technology (Montréal, QC, Canada, 28 May-01 June, 2012)

Seyed Ali Niknam, Yasser Zedan, Victor Songmene. 2012. « Burr formation during milling of wrought aluminum alloys ». 20th Annual Conference of Mechanical Engineering (ISME) (Shiraz, Iran, May 15-17, 2012)

V. Songmene, J. Kouam, I. Zaghbani, N. Parson, A. Maltais. 2012. « Global machinability of Al-Mg-Si extrusions ». In Aluminium Alloys - New Trends in Fabrication and Applications . p. 223-251. InTech.

Victor Songmene, Riad Khettabi, Jules Kouam. 2012. « Dry high-speed machining: A cost effective and green process ». International Journal of Manufacturing Research. vol. 7 , nº 3. p. 229-256.

B. Wenga Ntcheping, R. Kamguem, J. Kouam, V. Songmene. 2012. « Numerical study and simulation in COMSOL multiphysics of the dilution process during Dust's sampling in dry machining ». COMSOL Conference 2012 (Boston, MA, USA, Oct. 03-05, 2012) COMSOL.

B. Wenga, A. Djebara, R. Kamguem, J. Kouam, V. Songmene. 2012. « Diluteur approprié pour la mesure des concentrations élevées en poussières fines et ultrafines au cours de l'usinage à sec ». Affiche présentée lors de la conférence : 17e Colloque international en évaluation environnementale ( Montréal, QC, Canada, 12-15 juin 2012 )

Imed Zaghbani, Walid Jomaa, Victor Songmene, Louis-Philippe L. Boire, Hoang Lehuy. 2012. « Investigation on tool wear during dry and wet machining of hardened mould steels ». International journal of civil engineering and building materials. vol. 2 , nº 3. p. 124-131.

Y. Zedan, A. Djebara, Victor Songmene, S. A. Niknam. 2012. « Burr size minimization when drilling 6061-t6 aluminum alloy ». ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012) p. 1053-1059. New York, N.Y., USA : American Society of Mechanical Engineers.

Yasser Zedan, Riad Khettabi, Imed Zaghbani, Jules Kouam, Jacques Masounave, Victor Songmene. 2012. « Experimental investigation of cutting fluid influence on drilled aluminum part quality ». International journal of civil engineering and building materials. vol. 2 , nº 2. 7 p. p. 78-84.

Gad Noriel Abenhaim, Alain Desrochers, Antoine Tahan. 2012. « Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ». International Journal of Advanced Manufacturing Technology. vol. 63 , nº 5-8. p. 741-752.

Ali Aidibe, Antoine S. Tahan, Gad N. Abenhaim. 2012. « Distinguishing profile deviations from a part's deformation using the maximum normed residual test ». WSEAS Transactions on Applied and Theoretical Mechanics. vol. 7 , nº 1. p. 18-28.

J. Arpin-Pont, M. Gagnon, Antoine Tahan, A. Coutu, D. Thibault. 2012. « Strain gauge measurement uncertainties on hydraulic turbine runner blade ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) UK : IOP Publishing Ltd..

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan, Robert Sabourin. 2012. « Review and study of genotypic diversity measures for real-coded representations ». IEEE Transactions on Evolutionary Computation. vol. 16 , nº 5. p. 695-710.

M. Gagnon, Antoine Tahan, Philippe Bocher, D. Thibault. 2012. « The role of high cycle fatigue (HCF) onset in Francis runner reliability ». 26th IAHR Symposium on Hydraulic Machinery and Systems (Beijing, China, Aug. 19-23, 2012) UK : IOP Publishing Ltd..

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2012. « On the stochastic simulation of hydroelectric turbine blades transient response ». Mechanical Systems and Signal Processing. vol. 32 p. 178-187.

R. Kamguem, B. Wenga, Antoine Tahan, V. Songmene. 2012. « Non-contact optical inspection of machined parts surface roughness ». Communication lors de la conférence : International Conference on Virtual Machining Process Technology (VMPT) ( Montreal, QC, Canada, May 28-June 1, 2012 )

M. Kedadouche, Marc Thomas, Antoine Tahan. 2012. « Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association.

M. Poirier, Antoine Tahan, M. Gagnon, A. Coutu. 2012. « Extrapolation des signaux de chargement mesurés sur des aubes de turbine hydroélectrique de type Francis  ». 30th Canadian Machinery Vibration Association (CMVA) (Niagara Falls, ON, Canada, Oct. 24-26, 2012) The Canadian Machinery Vibration Association.

Hassan Radvar-Esfahlan, Souheil-Antoine Tahan. 2012. « Nonrigid geometric metrology using generalized numerical inspection fixtures ». Precision Engineering. vol. 36 , nº 1. p. 1-9.

A. S. Tahan, J. Cauvier. 2012. « Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ». Journal of Manufacturing Science and Engineering. vol. 134 , nº 2.

Antoine Tahan. 2012. « Conception et assemblage, un mariage de raison ! ». L’Atout. vol. , nº novembre. p. 16-18.

Marc Thomas, Antoine Tahan, M. Kedadouche. 2012. « Comparison of acoustic emission and vibration measurements for early detection of bearing damages ». Research and Innovation for Transport Systems of the Future (RITF) (Paris, France, Nov. 15, 2012)

P. Masson, N. Quaegebeur, P. Micheau, A. Maslouhi, M. Viens, L. Lessard, P. Hubert, S. Kruger. 2012. « Characterization of guided wave propagation in aircraft structures ». Recherche et Innovation pour les Transports du Futur (RITF 2012) (Paris, France, Nov.12-16, 2012)

Jean-François Chatelain, J. F. Lalonde, Antoine Tahan. 2011. « A comparison of the distortion of machined parts resulting from residual stresses within workpieces ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) p. 79-84. World Scientific and Engineering Academy and Society.

Jean-François Chatelain, Imed Zaghbani. 2011. « Effect of tool geometry special features on cutting forces of multilayered CFRP laminates ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) p. 85-90. World Scientific and Engineering Academy and Society.

Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2011. « Prediction of thin wall surface shape through simulation of the machining process for light alloy workpieces ». Journal of Machining and Forming Technologies. vol. 3 , nº 3-4. p. 185-202.

I. Zaghbani, J.-F. Chatelain, V. Songmene, S. Bérubé, A. Atarsia. 2011. « Modeling of cutting forces for multilayered CFRP laminates ». 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011) p. 1224-1233. DEStech Publications.

Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2011. « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». Journal of Alloys and Compounds. vol. 509 , nº 5. p. 2066-2075.

X. Cao, M. Jahazi. 2011. « Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ». Materials and Design. vol. 32 , nº 1. p. 1-11.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue. 2011. « Mechanical property and microstructure of linear friction welded WASPALOY ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 42 , nº 3. p. 729-744.

E. Dalgaard, P. Wanjara, G. Trigo, M. Jahazi, G. Comeau, J. J. Jonas. 2011. « Linear friction welding of Al-Cu Part 2 - interfacial characteristics ». Canadian Metallurgical Quarterly. vol. 50 , nº 4. p. 360-370.

E. Moosavi-Khoonsari, F. Jalilian, F. Paray, D. Emadi, R. A. L. Drew. 2011. « Cast joining of cast iron to aluminium casting matrix ». Materials Science and Technology. vol. 27 , nº 11. p. 1707-1717.

Q. H. Bui, Tan Pham. 2011. « Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing ». International Journal of Mechanical Sciences. vol. 53 , nº 10. p. 812-826.

Q. H. Bui, Tan Pham, M. Fafard. 2011. « A self-consistent model predicting the mechanical behavior of cold-draw 6063 aluminium tubes ». COM 2011 : Conference of Metallurgists (Montreal, Canada, Oct. 2-5, 2011)

Antoine Brière-Côté, Louis Rivest, Roland Maranzana. 2011. « Three-step approach for structuring 3D CAD model comparison scenarios ». Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011) p. 429-443. IFIP Working Group 5.1.

Frédéric Demoly, Xiu-Tian Yan, Benoît Eynard, Louis Rivest, Samuel Gomes. 2011. « An assembly oriented design framework for product structure engineering and assembly sequence planning ». Robotics and Computer-Integrated Manufacturing. vol. 27 , nº 1. p. 33-46.

Denis Jouffroy, Alain Desrochers, Louis Rivest. 2011. « Numerical representation of interface control documents (ICDs) for collaborative engineering ». Product Lifecycle Management : Virtual Product Lifecycles for Green Products and Services : Proceedings of the PLM11 conference held at the Eindhoven (Eindhoven, The Netherlands, July 11-13, 2011) p. 182-194. IFIP Working Group 5.1.

Virgilio Quintana, Louis Rivest, Robert Pellerin, Frederick Venne. 2011. « Methodology for the implementation of the model-based definition approach ». Journal of Operations and Logistics. vol. 4 , nº 3. p. 11.1-11.12.

A. Djebara, R. Khettabi, J. Kouam, Victor Songmene. 2011. « Characterization of fine and ultrafine particles produced during dry machnining of aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) p. 157-170. Westmount : MetSoc.

Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2011. « Comparison of the capability of peak function in describing real condensation particle counter profiles ». 2nd International Conference on Laser and Plasma Applications in Materials Science, (LAPAMS) (Algiers, Algeria, Nov. 27-30, 2010) p. 96-100. Clausthal-Zellerfeld, Germany : Trans Tech Publications.

W. Jomaa, N. Ben Fredj, I. Zaghbani, V. Songmene. 2011. « Non-conventional turning of hardened AISI D2 tool steel ». International Journal of Advances in Machining and Forming Operations. vol. 3 , nº 2. p. 93-126.

René Kamguem, Victor Songmene, Jean-Pierre Kenné, Antoine Tahan. 2011. « Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011) p. 495-508. Westmount : MetSoc.

Riad Khettabi, Imed Zaghbani, Abdelhakim Djebara, Jules Kouam, Victor Songmene. 2011. « A new sustainability model for machining processes ». International Journal of Business Continuity and Risk Management. vol. 2 , nº 3. p. 187-202.

Riad Khettabi, Yasser Zedan, Jacques Masounave, Victor Songmene. 2011. « On particle emission during machining of titanium and aluminum alloys ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011) p. 475-486. Westmount : MetSoc.

Jules Kouam, Yasser Zedan, Abdelhakim Djebara, Jacques Masounave, Victor Songmene. 2011. « Machinability of A356 and A319 aluminum alloy ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) p. 281-292. Westmount : MetSoc.

Annie Francie Kouedeu, Jean-Pierre Kenné, Victor Songmene. 2011. « Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ». 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011) p. 59-64. IEEE.

M. Lamraoui, Marc Thomas, M. El Badaoui, I. Zaghbani, Victor Songmene. 2011. « New indicators based on cyclostationarity approach for machining monitoring ». International Conference Surveillance 6 (Compiègne, France, Oct. 25-26, 2011) p. 27.

Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, Imed Zaghbani, Victor Songmene. 2011. « The angular kurtosis and power : new tools for machining monitoring  ». DINAME : The 14th International Symposium on Dynamic Problems of Mechanics (Sao Paulo, Brazil, Mar. 13-18, 2011) p. 494-511. Sao Sebastiao : ABCM.

Seyed Ali Niknam, Azziz Tiabi, Imed Zaghbani, Rene Kamguem, Victor Songmene. 2011. « Milling burr size estimation using acoustic emission and cutting forces ». ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Denver, CO, United states, Nov. 11-17, 2011) p. 901-909. American Society of Mechanical Engineers.

Victor Songmene, R. Khettabi, I. Zaghbani, J. Kouam, A. Djebara. 2011. « Machining and Machinability of Aluminum Alloys ». In Aluminium Alloys, Theory and Applications . p. 377-400. InTech.

Jomaa Walid, Imed Zaghbani, Victor Songmene, Louis-Philippe L. Boire, Hoang LeHuy. 2011. « Dry and wet machinability of hardened mould steels ». Proceedings of the International Conference on Environmental Pollution and Remediation (Ottawa, ON, Canada, Aug. 17-19, 2011) ASET.

I. Zaghbani, M. Lamraoui, V. Songmene, M. Thomas, M. El Badaoui. 2011. « Robotic high speed machining of aluminum alloys ». High Speed Machining : The 4th International Conference on High Speed Machining (ICHSM’2010) (Guangzhou, Guangdong, China, Oct. 9-10, 2010) p. 584-589. Trans Tech Publications.

Yasser Zedan, Riad Khettabi, Victor Songmene, Jacques Masounave. 2011. « Effect of lubrication and application modes on drilled aluminum part quality ». Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011) p. 319-330. Westmount : MetSoc.

Gad N. Abenhaim, Antoine Tahan, Alain Desrochers, Roland Maranzana. 2011. « A novel approach for the inspection of flexible parts without the use of special fixtures ». Journal of Manufacturing Science and Engineering. vol. 133 , nº 1. 11 p.

A. Aidibe, Antoine Tahan, G. N. Abenhaim. 2011. « Dimensioning control of non-rigid parts using the Iterative Displacement Inspection with the maximum normed residual test ». 2nd International Conference on Fluid Mechanics and Heat and Mass Transfer (FLUIDSHEAT'11), 2nd International Conference on Theoretical and Applied Mechanics (TAM'11), 4th WSEAS International Conference on UPT'11 (CUHT'11) (Corfu Island, Greece, July 15-17, 2011) p. 13-18. Corfu Island, Greece : World Scientific and Engineering Academy and Society.

N. Beaulieu, Antoine Tahan. 2011. « Le portrait du lean manufacturing au Québec : sondage 2012 ». Communication lors de la conférence : Forum TI-PME 2011 ( Montréal, QC, Canada, 20 avril 2011 )

Nicolas B. Beaulieu, Antoine Tahan. 2011. « Lean manufacturing au Québec : portrait 2010 ». Montréal, Québec, Canada : Manufacturiers et Exportateurs au Québec. 45 p.

F. Pelletier, Christian Masson, Antoine Tahan. 2011. « Running advanced analytics using MATLAB and PI system ». Communication lors de la conférence : OSIsoft user conference ( San Francisco, CA, USA, Mar. 28-30, 2011 )

Hassan Radvar-Esfahlan, Antoine Tahan. 2011. « Distance preserving dimensionality reduction methods and their applications in geometric inspection of nonrigid parts ». 5th symposium on Advances in Science and Technology (Mashhad, Iran, May 12-17, 2011)

Antoine Tahan. 2011. « Exploiter les études de capabilité ». Communication lors de la conférence : 3e Journée de Métrologie en Aérospatiale ( Montréal, QC, Canada, 28 avril 2011 )

Antoine Tahan. 2011. « La gestion de la qualité : histoire, présent et future ». Communication lors de la conférence : Colloque Annuel de l'Ordre des Ingénieurs du Québec ( Montréal, QC, Canada, 12-13 mai 2011 )

Antoine S. Tahan, Sylvain Levesque. 2011. « Exploiting the process capability in the statistical estimation of the tolerance of location ». Mécanique & Industries. vol. 12 , nº 6. p. 503-512.

Antoine Tahan, Denis Thibault, Luc Marcouiller, Martin Gagnon, Mickael Szczota. 2011. « Modeling operation history of hydroelectric turbines  ». The HydroVision International Conference (Sacramento, CA, USA, July 19-22, 2011)

C. A. C. Alba, Martin Viens, X.-W. Tu. 2011. « Development of an image acquisition and processing system for automation of fluorescent penetrant inspection (FPI) ». 58th Aeronautics Conference and AGM (AERO 2011) (Montreal, Canada, Apr. 26-28, 2011) Kanata, Canada : Canadian Aeronautics and Space Institute.

L. A. Généreux, Martin Viens, G. Lebrun. 2011. « Comparison of ultrasonic testing and infrared thermography for the detection of machining defects in composite materials ». Proceedings of the American Society for Composites--Twenty-Sixth Technical Conference (Montréal, Canada, Sept. 26-28, 2011) Lancaster, Penn., USA : DEStech Publications Inc..

Martin Viens, N. Fournier, S. Carpentier. 2011. « Les défis NDT en aéronautique ». Communication lors de la conférence : Atelier Organisé dans le Cadre du Colloque Aérotechnique ( Montréal, QC, Canada, 15 mars 2011 )

N. Bastajib, N. Boutana, P. Bocher, M. Jahazi. 2010. « Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ». Technische Mechanik. vol. 30 , nº 1-3. 14 p.

Antoine Bres, Bruno Monsarrat, Laurent Dubourg, Lionel Birglen, Claude Perron, Mohammad Jahazi, Luc Baron. 2010. « Simulation of friction stir welding using industrial robots ». Industrial Robot. vol. 37 , nº 1. p. 36-50.

Xinjin Cao, Guillaume Debaecker, Mohammad Jahazi, Surendar Marya, Jonathan Cuddy, Anand Birur. 2010. « Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ». Materials Science Forum. THERMEC 2009 p. 3655-3660. Trans Tech Publications Ltd.

Xinjin Cao, Mohammad Jahazi. 2010. « Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ». THERMEC 2009 Supplement (Berlin, Germany, ) p. 3661-3666. Berlin, Germany : Trans Tech Publications Ltd.

E. Dalgaard, F. Coghe, L. Rabet, M. Jahazi, P. Wanjara, J. J. Jonas. 2010. « Texture evolution in linear friction welded Ti-6Al-4V ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) p. 124-129. Berlin, Germany : Trans Tech Publications.

L. Dubourg, P. Doran, S. Larose, M. A. Gharghouri, M. Jahazi. 2010. « Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) p. 1215-1220. Berlin, Germany : Trans Tech Publications Ltd.

L. Dubourg, A. Merati, M. Jahazi. 2010. « Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ». Materials and Design. vol. 31 , nº 7. p. 3324-3330.

F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2010. « Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ». Materials Science and Engineering A. vol. 527 , nº 16-17. p. 4152-4160.

S. Larose, L. Dubourg, C. Perron, M. Jahazi, P. Wanjara. 2010. « Limitation of distortion in friction stir welded (FSW) panels using needle peening ». THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009) p. 1203-1208. Berlin, Germany : Trans Tech Publications Ltd.

P. Vo, M. Jahazi, S. Yue. 2010. « FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ». THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) p. 592-597. Berlin, Germany : Trans Tech Publications.

E. M. Khoonsari, F. Jalilian, F. Paray, D. Emadi, R. A. L. Drew. 2010. « Interaction of 308 stainless steel insert with A319 aluminium casting alloy ». Materials Science and Technology. vol. 26 , nº 7. p. 833-841.

Matthieu Bricogne, Nadège Troussier, Louis Rivest, Benoît Eynard. 2010. « PLM perspectives in mechatronic systems design ». Advances in Production Management Systems (APMS) (Cernobbio, Lake Como, Italy, Oct. 11-13, 2010)

Antoine Brière-Côté, Louis Rivest. 2010. « Vers une nouvelle approche pour la mesure et la représentation des différences entre modèles géométriques. ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec ( Sherbrooke, Canada, 19 mai 2010 )

Antoine Brière-Côté, Louis Rivest, Alain Desrochers. 2010. « Adaptive generic product structure modelling for design reuse in engineer-to-order products ». Computers in Industry. vol. 61 , nº 1. p. 53-65.

Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest. 2010. « PLM-based approach for Assembly Process Engineering  ». International Journal of Manufacturing Research. vol. 5 , nº 4. 16 p. p. 413-428.

Frédéric Demoly, Davy Monticolo, Benoît Eynard, Louis Rivest, Samuel Gomes. 2010. « Multiple viewpoint modelling framework enabling integrated product-process design ». International Journal on Interactive Design and Manufacturing. vol. 4 , nº 4. p. 269-280.

Fawzi Kheddouci, Louis Rivest. 2010. « Archivage long-terme de la maquette numérique enrichie : problématique et alternatives de solutions ». Communication lors de la conférence : 4e Édition du Colloque sur les Technologies CAO/FAO au Québec ( Sherbrooke, Canada, 19 mai 2010 )

Jimmy Malkoun, Mickaël Gardoni, Louis Rivest. 2010. « The main elements brought by MOKA (KBE method) to promote an accelerated technology transfer process between aerospace and automotive industries ». ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2010) (Montréal, Québec, Canada, Aug. 15–18, 2010) p. 1221-1230. New York, NY, USA : American Society of Mechanical Engineers.

Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne, Fawzi Kheddouci. 2010. « Will model-based definition replace engineering drawings throughout the product lifecycle? A global perspective from aerospace industry ». Computers in Industry. vol. 61 , nº 5. p. 497-508.

Louis Rivest, Fawzi Kheddouci, Clément Fortin. 2010. « Towards long-term archiving of 3D annotated models : a sneak peek to a potential solution ». International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) : Virtual Concept 2010 (Bordeaux, France, Oct. 20-22, 2010)

Frédérick Venne, Louis Rivest, Alain Desrochers. 2010. « Assessment of 3D annotation tools as a substitute for 2D traditional engineering drawings in aerospace product development ». Computer-Aided Design and Applications. vol. 7 , nº 4. p. 547-563.

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene. 2010. « Étude du comportement des roulements dans les rotors tournant à haute vitesse ». Revue Internationale sur l'Ingénierie des Risques Industriels. vol. 3 , nº 1. 16 p.

Abdelhakim Djebara, Riad Khettabi, Jules Kouam, Victor Songmene. 2010. « Experimental investigation on ultrafine particles emission during dry machining using statistical tools ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)

Abdelhakim Djebara, Riad Khettabi, Seyed Ali Niknam, Victor Songmene. 2010. « Ultrafine particles sampling during machining of aluminum alloys : application to the nanoparticles metrology ». Communication lors de la conférence : Journée des Étudiants du Centre de Recherche sur l'Aluminium (REGAL) ( Laval, Québec, Canada, 26 oct. 2010 )

René Kamguem, Victor Songmene, Seyed Ali Niknam. 2010. « Assessing the influence of acoustic emission parameters on machining processing using statistical analysis ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)

Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2010. « Characterization and control of micro and nanoparticles produced during dry cutting ». X th Safety, Health and Environment World Congress (São Paulo, Brazil, July, 25-28, 2010)

Riad Khettabi, Jacques Masounave, Victor Songmene. 2010. « Influence of machining processes on particles emissions ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)

Riad Khettabi, Victor Songmene. 2010. « Caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d'usinage ». Communication lors de la conférence : Activité d'animation scientifique de la communauté nanotoxicologie du Réseau de recherche en santé et sécurité du travail du Québec (RRSSTQ) ( Montréal, Canada, 18 mars 2010 )

Riad Khettabi, Victor Songmene, Jacques Masounave. 2010. « Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting ». Journal of Materials Engineering and Performance. vol. 19 , nº 6. p. 767-775.

Riad Khettabi, Victor Songmene, Imed Zaghbani, Jacques Masounave. 2010. « Modeling of particle emission during dry orthogonal cutting ». Journal of Materials Engineering and Performance. vol. 19 , nº 6. p. 776-789.

Jules Kouam, Jacques Masounave, Victor Songmene, Alain Giraudeau. 2010. « Pre-holes effect on cutting forces and particle emission during dry drilling ». 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)

Jules Kouam, Victor Songmene, Abdelhakim Djebara, Riad Khettabi. 2010. « Metallic particle emission during friction testing of metals ». International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)

Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010. « A Review on bearing faults diagnosis using acoustic emission ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Tehran, Iran : Civilica.

Seyed Ali Niknam, Seyed Mehdi Rezaei, Victor Songmene. 2010. « Sensitivity of acoustic emission to lubrication on bearing surfaces ». 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010) Tehran, Iran : Civilica.

Seyed Ali Niknam, Victor Songmene, Y.H. Joe Au. 2010. « Bearing condition monitoring in low rotating speed machine using acoustic emission ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)

Seyed Ali Niknam, René Kamguem, Victor Songmene, Jean-Pierre Kenné. 2010. « Machining factors influence on acoustic emission parameters ». International Journal of Advances in Machining and Forming Operations. vol. 2 , nº 2. p. 91-114.

Seyed Ali Niknam, Victor Songmene. 2010. « The influence of bearing operational conditions on acoustic emission parameters ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)

Boris Rabussier, Jacek Litwin, Victor Songmene, Jacques Masounave. 2010. « Effect of temperature and stress on friction of metal matrix composite ». 49th Annual Conference of Metallurgists (COM) (Vancouver, BC, Canada, Oct. 3-6, 2010)

Victor Songmene. 2010. « Automated deburring and part finishing : progress and realisations ». Communication lors de la conférence : CRIAQ : Réunions du comité de recherche ( Montréal, Canada, 13 janv. 2010 )

Imed Zaghbani, Victor Songmene, Guillaume Kientzy, Hoang LeHuy. 2010. « Evaluation of sustainability of mould steels based on machinability data ». International Journal of Machining and Machinability of Materials. vol. 7 , nº 1-2. p. 58-81.

Imed Zaghbani, Victor Songmene, D. Tousignant. 2010. « A method for selection of the cutting conditions during robotic machining through the vibration response ». Premier Colloque International Innovations en Mécaniques Passives et ACTives pour l’ Analyse et la Conception des Systèmes Mécaniques (IMPACT) = First International Conference Passives and Actives Mechanical Innovations in Analysis and Design of Mechanica (Djerba, Tunisie, 22-24 août 2010)

Guillaume Corriveau, Raynald Guilbault, Antoine Tahan. 2010. « Genetic algorithms and finite element coupling for mechanical optimization ». Advances in Engineering Software. vol. 41 , nº 3. 5 p. p. 422-426.

Martin Gagnon, Antoine Tahan, Philippe Bocher, Denis Thibault. 2010. « Impact of startup scheme on Francis runner life expectancy ». 25th IAHR Symposium on Hydraulic Machinery and Systems (Timisoara, Romania, 20–24 Sept. 2010) p. 12107. London, UK : Institute of Physics Publishing.

Claude Gosselin, Antoine Tahan, Michel Ruel, Mathieu Desnoyers. 2010. « Simplified approach for monitoring the performance of multivariable processes ». Proceedings of the 2nd International Congress of Automation in the Mining Industry (Santiago, Chile, Nov. 10-12, 2010)

Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010. « Experiment using high-frequency data sampling ». Affiche présentée lors de la conférence : Windpower Conference and Exhibition ( Dallas, TX, USA, May 23-26, 2010 )

Francis Pelletier, Christian Masson, Antoine Tahan, Martin Jetté. 2010. « Modelling through high frequency data sampling and other advantages ». Communication lors de la conférence : European Wind Energy Conference and Exhibition (EWEC) ( Warsaw, Poland, April 20-23, 2010 )

Marc Potvin, Antoine Tahan. 2010. « Investigation metrology ». Communication lors de la conférence : 3D Imaging Conference and Exposition ( Anaheim, Ca., USA, May 18-20, 2010 )

Hassan Radvar-Esfahlan, Antoine Tahan. 2010. « Nonrigid geometric inspection using intrinsic geometry ». Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C., Canada, June 7-9, 2010)

Patrice Seers, P. Terrier, Antoine Tahan, Marc Thomas. 2010. « Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics . p. 83-109. Cambridge Scholars Publishing.

Antoine Tahan. 2010. « Le rapport de mesure, puis après? ». Communication lors de la conférence : 2ème Journée de la métrologie en aérospatiale (JMA) ( Montréal, Québec, Canada, 11 mars 2010 )

Serge St-Martin, Jean-François Chatelain, René Mayer, H. Paris. 2009. « Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ». Revue d'Ingénierie Numérique Collaborative. vol. 3 , nº 1.

V. Brailovski, S. D. Prokoshkin, V. Demers, K. Inaekyan, I. Yu Khmelevskaya. 2009. « Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ». Proceedings of the International Conference on Martensitic Transformations, June 29-July 05, 2008 : ICOMAT : Santa Fe, New Mexico, USA, 2008 (Santa Fe, NM, USA, June 29-July 5, 2008) p. 323-327. Warrendale, PA, USA : TMS (The Minerals, Metals & Materials Society).

Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan, V. Demers. 2009. « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009) Cedex A, France : E D P Sciences.

V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009. « Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ». Journal of Materials Processing Technology. vol. 209 , nº 6. p. 3096-3105.

V. Demers, Vladimir Brailovski, S. D. Prokoshkin, K. E. Inaekyan. 2009. « Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ». Materials Science and Engineering : A. vol. 513-514 p. 185-196.

X. Cao, M. Jahazi. 2009. « Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ». Optics and Lasers in Engineering. vol. 47 , nº 11. p. 1231-1241.

X. Cao, M. Jahazi. 2009. « Effect of welding speed on lap joint quality of AZ31 magnesium alloy ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) p. 72-80. ASM International.

X. Cao, M. Jahazi. 2009. « Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ». Materials and Design. vol. 30 , nº 6. p. 2033-2042.

X. Cao, B. Rivaux, M. Jahazi, J. Cuddy, A. Birur. 2009. « Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ». Journal of Materials Science. vol. 44 , nº 17. p. 4557-4571.

A. Chamanfar, M. Jahazi, S. Yue, J. Gholipour, P. Wanjara. 2009. « Linear friction welding behavior of Waspaloy ». Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009) p. 2511-2522. Association for Iron and Steel Technology.

E. Coman, K. Ghosh, M. Jahazi, L. Dubourg. 2009. « A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ». International Journal of Advanced Manufacturing System. vol. 11 , nº 2. p. 75-84.

E. Dalgaard, Mohammad Jahazi, Ali Merati, P. Wanjara. 2009. « Mechanical properties of linear friction welded Ti-6-4V alloy ». XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009) p. 1416-1424. American Institute of Aeronautics and Astronautics.

L. Dubourg, J. Gholipour, M. Jahazi. 2009. « Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ». Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008) p. 549-556. ASM International.

M. Haghshenas, A. Zarei-Hanzaki, M. Jahazi. 2009. « An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ». Materials Characterization. vol. 60 , nº 8. p. 817-823.

C. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2009. « Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ». Materials Characterization. vol. 60 , nº 5. p. 370-376.

A. Merati, J. Deronja, L. Dubourg, M. Jahazi. 2009. « Friction stir processing technology for the repair of nickel-aluminum bronze ». Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)

A. Merati, L. Dubourg, M. Jahazi. 2009. « Application of FSW technology for additive repair of damaged components ». RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009) NATO Science and Technology Organization.

P. Wanjara, M. Jahazi. 2009. « Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ». Canadian Metallurgical Quarterly. vol. 48 , nº 3. p. 317-326.

X. T. Pham, P. Gougeon, F. O. Gagnon. 2009. « Welding simulation of cast aluminium A356 ». Trends in Welding Research : proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 01-06, 2008) p. 258-263. ASM International.

Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest, Jean-Claude Sagot. 2009. « Assembly-oriented product structure based on preliminary assembly process engineering ». Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 7, Design for X (Stanford, CA, USA, Aug. 24-27, 2009) p. 161-172.

Frédéric Demoly, Samuel Gomes, Benoît Eynard, Louis Rivest, Jean-Claude Sagot. 2009. « Vers un modèle multi-vues pour la conception orientée assemblage ». 11ème Colloque National Atelier Inter-Établissements de Productique et Pôle de Ressources Informatiques pour la MECAnique (AIP PRIMECA) (Plagne, France, 22-24 avril 2009)

Virgilio Quintana, Louis Rivest, Robert Pellerin, Antoine Tahan, Frédérick Venne. 2009. « From fully dimensioned 2D drawings to reduced dimensioning 3D model-based definition ». Proceedings of the International Conference on Product Lifecycle Management : Supporting the Extended Enterprise (Bath, United Kingdom, July 6-9, 2009) p. 539-548. Geneve, Switzerland : Inderscience Enterprise Ltd.

Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne. 2009. « Methodology for the application of the model-based definition approach for managing the product definition ». International CAD Conference and Exhibition (CAD) (Reno, NV, USA, June 8-12, 2009)

Virgilio Quintana, Louis Rivest, Robert Pellerin, Frédérick Venne. 2009. « Methodology for the implementation of the model-based definition approach ». International Conference on Industrial Engineering and Systems Management (IESM) (Montreal, QC, Canada, May 13-15, 2009)

Louis Rivest. 2009. « CADz Detector : Détecteur de plagiat pour la CAO ». Communication lors de la conférence : Atelier universitaire sur le plagiat dans les universités québécoises à l’ère du numérique ( Trois-Rivières, QC, Canada, 29 oct. 2009 )

Louis Rivest. 2009. « Le dessin d'ingénierie traditionnel sera-t-il toujours nécessaire? ». Communication lors de la conférence : Journée Thématique - Définition Numérique des Produits ( Montréal, QC, Canada, 5 juin 2009 )

Frédérick Venne, Louis Rivest, Alain Desrochers. 2009. « Capture des notes, dimensions et tolérances au sein de la maquette numérique 3D aéronautique ». Revue d'Ingénierie Numérique Collaborative. vol. 3 , nº 1.

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009. « Instabilité des fraiseuses opérant à haute vitesse, provoquée par l’intéraction des défauts de roulements avec les résonances ». Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009) Canadian Machinery Vibration Association (CMVA) :

Béchir Badri, Marc Thomas, Sadok Sassi, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009. « Étude du comportement des roulements dans les rotors tournant à haute vitesse. ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

B. Balout, Jacques Masounave, Victor Songmene. 2009. « Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ». Journal of Materials Processing Technology. vol. 209 , nº 18-19. p. 5955-5963.

Bahaa Balout, Victor Songmene, Jacques Masounave. 2009. « Mise en forme par centrifugation d'un composite à matrice d'aluminium gradué : modélisation de la ségrégation des particules pendant le processus de solidification ». In Encyclopédie de la recherche sur l'aluminium au Québec . Éd. 2008. Les Presses de l'aluminium PRAL.

Abdelhakim Djebara, Victor Songmene. 2009. « Mesure et caractérisation des nanoparticules (Nps) métalliques émises lors de l'usinage ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation ( Montréal, Canada, 23-24 avril 2009 )

Stéphane Hallé, Jules Kouam, Victor Songmene, François Morency, Martin Viens, Yves Cloutier, Jacques Masounave, Riad Khettabi, Abdelhakim Djebara. 2009. « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels ( Montréal, QC, Canada, 17 sept. 2009 )

R. Khettabi, A. Djebara, V. Songméné, M. Viens, S. Hallé, F. Morency, Y. Cloutier, J. Kouam, J. Masounave. 2009. « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation ( Montréal, QC, Canada, 23-24 avr. 2009 )

Riad Khettabi, Abdelhakim Djebara, Victor Songmene. 2009. « Nano and micro particles emission study during metal cutting ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation ( Montréal, Canada, 23-24 avril 2009 )

Riad Khettabi, Abdelhakim Djebara, Victor Songmene, Martin Viens, Stéphane Hallé, François Morency, Yves Cloutier, Jules Kouam, Jacques Masounave. 2009. « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation ( Montréal, Canada, 23-24 avril 2009 )

Riad Khettabi, Victor Songmene. 2009. « Particle emission during orthogonal and oblique cutting ». International Journal of Advances in Machining and Forming Operations. vol. 1 , nº 1. p. 1-10.

K. A. Sghir, M. El Badaoui, Marc Thomas, Imed Zaghbani, Victor Songmene, A. A. Lakis, N. Mureithi. 2009. « Identification aveugle paramétrique basée sur la cyclostationnarité à l’ordre deux de la fonction de transfert à partir des mesures vibratoires ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

Victor Songmene. 2009. « Dry machining and its effects on machining costs and shop-floor air quality ». Communication lors de la conférence : Hiroshima Aerospace Seminar ( Montreal, QC, Canada, Oct. 7, 2009 )

Imed Zaghbani, Victor Songmene. 2009. « A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ». Journal of Materials Processing Technology. vol. 209 , nº 5. p. 2532-2544.

Imed Zaghbani, Victor Songmene. 2009. « Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ». International Journal of Machine Tools and Manufacture. vol. 49 , nº 12-13. p. 947-957.

Imed Zaghbani, Victor Songmene, Riad Khettabi. 2009. « Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ». Journal of Materials Engineering and Performance. vol. 18 , nº 1. p. 38-48.

Martin Gagnon, Antoine Tahan, André Coutu. 2009. « Uncertainty in operational modal analysis of hydraulic turbine components ». International Journal of Fluid Machinery and Systems. vol. 2 , nº 4. p. 278-285.

Antoine Tahan. 2009. « La gestion des variations géométriques : le présent et l'avenir ». Communication lors de la conférence : 1ère Journée de la Métrologie en Aérospatiale (JMA) ( Montréal, QC, Canada, 5 mars 2009 )

Antoine Tahan, Sylvain Levesque. 2009. « Exploiting the process capability of position geometric tolerance according GD & T ASME Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) p. 1267-1272. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.

Antoine Tahan, Sylvain Levesque. 2009. « Exploiting the process capability of profile tolerance according GD&T ASME-Y14.5M ». International Conference on Computers and Industrial Engineering (CIE) (Troyes, France, July 6-9, 2009) p. 1285-1290. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.

Jean-François Chatelain, Réjean Roy, René Mayer. 2008. « Development of a spiral trajectory for high speed roughing of light alloy aerospace components ». WSEAS Transactions on Applied and Theoretical Mechanics. vol. 3 , nº 3. p. 83-93.

R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008. « Optimization of adaptive spiral toolpaths for pocket machining ». International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)

R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008. « Programming of a machining procedure for adaptive spiral cutting trajectories ». 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008) p. 127-132. Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society (WSEAS).

S. St-Martin, Jean-François Chatelain, R. Mayer, S. Engin, S. Chalut. 2008. « Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ». Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)

Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2008. « Time domain simulation of thin wall surface finish machining for light alloy aerospace components ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)

I. Khmelevskaya, S. Prokoshkin, Vladimir Brailovski, K. Inaekyan, V. Demers, I. Gurtovaya, A. Korotitskiy, S. Dobatkin. 2008. « Functional properties of Ti-Ni-based shape memory alloys ». State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008) p. 156-161. Stafa-Zuerich, Suisse : Trans Tech Publications Ltd.

S. D. Prokoshkin, Vladimir Brailovski, K. E. Inaekyan, V. Demers, I. Yu Khmelevskaya, S. V. Dobatkin, E. V. Tatyanin. 2008. « Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ». Materials Science and Engineering : A. vol. 481-482 p. 114-118.

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2008. « Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ». Materials Science and Engineering A. vol. 472 , nº 1-2. p. 179-186.

H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi. 2008. « Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ». Materials Chemistry and Physics. vol. 109 , nº 1. p. 61-76.

Haider Al-Kazzaz, Xinjin Cao, Mohammad Jahazi, Mamoun Medraj. 2008. « Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ». Materials Transactions. vol. 49 , nº 4. p. 774-781.

N. Boutana, P. Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008. « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Transactions of the Canadian Society for Mechanical Engineering. vol. 32 , nº 2. p. 195-213.

N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Montheillet. 2008. « The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ». International Journal of Microstructure and Materials Properties. vol. 3 , nº 4-5. p. 642-653.

X. Cao, M. Guo, M. Jahazi. 2008. « Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 197-208. Canadian Institute of Mining Metallurgy & Petroleum.

X. Cao, M. Jahazi. 2008. « Overview of friction stir and laser welding techniques for lightweight alloys ». Canadian Welding Association Journal. p. 19-30.

X. Cao, M. Jahazi, N. Afrin, D. L. Chen. 2008. « Fatigue properties of friction stir welded AZ31B magnesium alloy ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 377-389. Canadian Institute of Mining Metallurgy & Petroleum.

X. Cao, M. Jahazi, H. Al-Kazzaz, M. Medraj. 2008. « Modelling of work-hardening behaviour for laser welded magnesium alloy ». International Journal of Materials Research. vol. 99 , nº 2. p. 216-221.

X. Cao, M. Jahazi, J. Fournier, M. Alain. 2008. « Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ». Journal of Materials Processing Technology. vol. 205 , nº 1–3. p. 322-331.

X. Cao, B. Rivaux, M. C. Jahazi, J. Cuddy, A. Birur. 2008. « Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 313-324. Canadian Institute of Mining Metallurgy & Petroleum.

X. Cao, M. Xiao, M. Jahazi, J. Fournier, M. Alain. 2008. « Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ». Materials and Manufacturing Processes. vol. 23 , nº 4. p. 413-418.

L. Dubourg, R. Amargier, M. Jahazi. 2008. « Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd.

L. Dubourg, A. Merati, M. Gallant, M. Jahazi. 2008. « Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ». 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd.

F. Gemme, Y. Verreman, L. Dubourg, M. Jahazi. 2008. « Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 77-86. Canadian Institute of Mining Metallurgy & Petroleum.

L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, Philippe Bocher. 2008. « Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ». Acta Materialia. vol. 56 , nº 16. p. 4298-4308.

J. Gholipour, M. Jahazi. 2008. « Evaluation of lubricants in hydroforming of aerospace materials ». Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)

D. Lévesque, L. Dubourg, M. Lord, M. Jahazi, A. Blouin. 2008. « Residual stress measurement in friction stir welds using laser ultrasonics ». Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) p. 1719-1726. AIP Publishing.

D. Lévesque, L. Dubourg, C. Mandache, P. Gougeon, X. Cao, M. C. Jahazi. 2008. « Assessment of friction stir welds with nondestructive methods ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 339-350. Canadian Institute of Mining Metallurgy & Petroleum.

Catalin Mandache, Laurent Dubourg, Ali Merati, Mohammad Jahazi. 2008. « Pulsed eddy current testing of friction stir welds ». Materials Evaluation. vol. 66 , nº 4. p. 382-387.

Caroline Mary, Mohammad Jahazi. 2008. « Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ». Advanced Engineering Materials. vol. 10 , nº 6. p. 573-578.

P. Vo, M. Jahazi, S. Yue. 2008. « Recrystallization during thermomechanical processing of IMI834 ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 39 , nº 12. p. 2965-2980.

X. Wang, M. Jahazi, S. Yue. 2008. « Investigation of α platelet boundaries in a near-α titanium alloy ». Materials Science and Engineering A. vol. 492 , nº 1–2. p. 450-454.

P. Wanjara, M. Jahazi. 2008. « Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ». International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 195-206. Canadian Institute of Mining Metallurgy & Petroleum.

P. Wanjara, M. Jahazi. 2008. « Characterization of electron beam welded 17-4 ph stainless steel ». Canadian Metallurgical Quarterly. vol. 47 , nº 4. p. 413-436.

P. Wanjara, E. Poirier, M. C. Jahazi. 2008. « Manufacture of a strut on a captive trajectory system by electron beam welding ». 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008) p. 243-254. Canadian Institute of Mining Metallurgy & Petroleum.

Nadjib Bouikni, Louis Rivest, Alain Desrochers. 2008. « A multiple views management system for concurrent engineering and PLM ». Concurrent Engineering : Research and Applications. vol. 16 , nº 1. p. 61-72.

F. Demoly, S. Gomes, B. Eynard, Louis Rivest, J.-C. Sagot. 2008. « Towards a collaborative DFA approach based on PLM ». 2nd CIRP Conference on Assembly Technologies & Systems (CATS) (Toronto, ON, Canada, Sept. 21-23, 2008) p. 100-113.

M.A. El Hani, Louis Rivest, C. Fortin. 2008. « Propagating engineering changes to manufacturing process planning: does PLM meet the need? ». 4th International Conference on Product Lifecycle Management (PLM) (Milan, Italy, July 11-13, 2007) p. 517-526. Geneve, Switzerland : Inderscience Enterprises Limited.

B. Ateme-Nguema, Thien-My Dao, Victor Songmene. 2008. « New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ». 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)

Bahaa Balout, Victor Songmene, Jacques Masounave. 2008. « Perçage à sec de l'aluminium et alliages métalliques ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)

R. Khettabi, Victor Songmene, Jacques Masounave, Imed Zaghbani. 2008. « Understanding the formation of nano and micro particles during metal cutting ». International Journal of Systems Signal Control and Engineering Applications. vol. 1 , nº 3. p. 203-210.

R. Khettabi, Imed Zaghbani, Victor Songmene, Jacques Masounave. 2008. « Identification et prédiction des fines poussières lors de l'usinage ». In Encyclopédie de la recherche sur l’aluminium au Québec . Éd. 2007. p. 56. Les Presses de l'aluminium PRAL.

Riad Khettabi, Victor Songmene, Jacques Masounave. 2008. « Influence des angles de coupe sur l'émission de poussières ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)

G. Kientzy, Imed Zaghbani, Victor Songmene. 2008. « Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ». In Encyclopédie de la recherche sur l’aluminium au Québec . Éd. 2007. p. 54. Les Presses de l'aluminium PRAL.

E. Mbou, Victor Songmene. 2008. « Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ». In Encyclopédie de la recherche sur l’aluminium au Québec . Éd. 2007. p. 55. Les Presses de l'aluminium, PRAL.

Victor Songmene, B. Balout, Jacques Masounave. 2008. « Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ». International Journal of Environmentally Conscious Design & Manufacturing. vol. 14 , nº 1. p. 17-33.

Victor Songmene, B. Balout, Jacques Masounave. 2008. « Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ». International Journal of Environmentally Conscious Design & Manufacturing . vol. 14 , nº 1. p. 1-16.

Victor Songmene, Jacques Masounave, R. Khettabi. 2008. « L'émission de poussières pendant l'usinage à sec : une synthèse ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)

Imed Zaghbani, R. Khettabi, Victor Songmene. 2008. « Base de données environnementales pour les alliages d'aluminium ». In Encyclopédie de la recherche sur l’aluminium au Québec . p. 1. Les Presses de l'aluminium PRAL.

G.N. Abenhaïm, Antoine Tahan, Roland Maranzana. 2008. « Nouveau algorithme pour l'inspection des coques flexibles par déplacement itératif ». 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)

Louis Lacasse, Antoine Tahan, Zhaoheng Liu. 2008. « Robust method for the automatic characterization of a wooden board's geometrical state ». Quality Engineering. vol. 20 , nº 2. p. 221-231.

F. Pelletier, Christian Masson, Antoine Tahan. 2008. « Power performance evaluation and improvement of operational wind power plant ». OSIsoft Wind Power User Group Meeting (Chicago, IL, USA, June 4, 2008)

A. Szymanski, J. Masounave, M. Viens, J. Litwin. 2008. « Émission de poussière par frottement ». Colloque USIFORME 2007 (Montréal, QC, Canada, 3-5 mars 2008)

M. Ben Salah, Jean-François Chatelain. 2007. « Part localization algorithm based on constrained alignment of surface patches ». Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007) p. 270-275. Piscataway, N. J., USA : International Society of Science and Applied Technologies.

B. Salah, Jean-François Chatelain. 2007. « Part localization based on a surface patch alignment algorithm ». 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)

Vladimir Brailovski, S. D. Prokoshkin, E. Bastarash, V. Demers, K. E. Inaekyan, I. Yu Khmelevskaya. 2007. « Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ». THERMEC 2006 p. 1964-1970. Switzerland : Trans Tech Publications Ltd.

V. Demers, V. Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2007. « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Fatigue and Fracture of Medical Metallic Materials and Devices (Dallas, TX, USA, Nov. 01, 2005) p. 34-44. American Society for Testing and Materials.

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007. « Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum.

N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007. « Strain hardening behavior of a friction stir welded magnesium alloy ». Scripta Materialia. vol. 57 , nº 11. p. 1004-1007.

N. Boutana, Philippe Bocher, M. Jahazi, D. Piot, F. Motheillet. 2007. « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) p. 267-270. Warrendale, PA, USA : Minerals, Metals and Materials Society.

X. Cao, M. Jahazi. 2007. « Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ». LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007) National Research Council Canada = Conseil national de recherches Canada.

X. Cao, M. Jahazi. 2007. « Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) p. 169-182. Canadian Institute of Mining, Metallurgy and Petroleum.

X. Cao, M. Jahazi, M. Guerin, R. S. Mishra. 2007. « Friction stir welding of an aerospace magnesium alloy ». Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007) p. 213-222. Warrendale, PA : The Minerals, Metals & Materials Society.

Xinjin Cao, Mohammad Jahazi. 2007. « New analyses of pressure filtration curves of Al alloys: a case study ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) p. 351-356. Vancouver, Canada : Trans Tech Publications Ltd.

E. Coman, L. Dubourg, M. Jahazi, K. Ghosh. 2007. « A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ». Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007) Universidad Militar Nueva Granada.

M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007. « Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) p. 117-128. Canadian Institute of Mining, Metallurgy and Petroleum.

M. Fairman, N. Afrin, D. L. Chen, X. Cao, M. Jahazi. 2007. « Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ». Canadian Metallurgical Quarterly. vol. 46 , nº 4. p. 425-432.

Lionel Germain, Phuong Vo, Nathalie Gey, Mohammad Jahazi, Michel Humbert, Philippe Bocher. 2007. « Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) p. 925-928. Warrendale, USA : Minerals, Metals and Materials Society.

D. Levesque, L. Dubourg, C. Mandache, S. E. Kruger, M. Lord, A. Merati, M. Jahazi, J-P. Monchalin. 2007. « Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ». Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) p. 263-270. AIP Publishing.

A. Liu, D. L. Chen, S. Bhole, X. Cao, M. Jahazi. 2007. « Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ». Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) p. 129-140. Canadian Institute of Mining, Metallurgy and Petroleum.

C. Mandache, A. Merati, L. Dubourg, M. Jahazi. 2007. « Pulsed Eddy Current Inspection of friction stir welded components ». ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007) ASNT.

C. Mary, M. Jahazi. 2007. « Linear friction welding of IN-718 process optimization and microstructure evolution ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) p. 357-362. Vancouver, BC, Canada : Trans Tech Publications.

E. Uta, M. Humbert, N. Gey, A. Hazotte, Philippe Bocher, M. Jahazi. 2007. « Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ». 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007) p. 259-262. Warrendale, USA : Minerals, Metals and Materials Society.

P. Vo, M. Jahazi, S. Yue. 2007. « Recrystallization during Alpha + Beta Processing of IMI834 ». Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007) p. 267-270. Warrendale, PA, USA : Minerals, Metals and Materials Society.

P. Vo, M. Jahazi, S. Yue. 2007. « Recrystallization during beta working of IMI834 ». THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) p. 965-969. Vancouver, BC, Canada : Trans Tech Publications.

Phuong Vo, M. Jahazi, S. Yue, Philippe Bocher. 2007. « Flow stress prediction during hot working of near-alpha titanium alloys ». Materials Science and Engineering : A. vol. 447 , nº 1-2. p. 99-110.

X. Wang, P. Vo, M. Jahazi, S. Yue. 2007. « Dwell fatigue microstructure in a near-α titanium alloy ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 38 , nº 4. p. 831-839.

P. Wanjara, M. Brochu, M. Jahazi. 2007. « Electron beam freeform fabrication on stainless steel ». Materials Science Forum. THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006) p. 4938-4943. Trans Tech Publications.

P. Wanjara, M. Brochu, M. Jahazi. 2007. « Electron beam freeforming of stainless steel using solid wire feed ». Materials and Design. vol. 28 , nº 8. p. 2278-2286.

M. Xiao, C. Poon, P. Wanjara, M. Jahazi, Z. Fawaz, P. Krimbalis. 2007. « Optimization of Nd-YAG laser welding process for Inconel 718 alloy ». Materials Science Forum. Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006) p. 1305-1308. Trans Tech Publications.

Cao Xinjin, Xiao Min, M. Jahazi, T. Shariff. 2007. « Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ». Materials Science Forum. THERMEC 2006 - Proceedings of the 5th International Conference on Processing and Manufacturing of Advanced Materials p. 1735-1740. Switzerland : Trans Tech Publications.

A. Brière-Côté, Louis Rivest, A. Desrochers. 2007. « Évolution de la structure d'un produit sur son cycle de vie dans un environnement hétérogène d'adaptation de produit à la demande ». Communication lors de la conférence : 75e Congrés de l'ACFAS ( Trois-Rivières, QC, Canada, 7-11 mai 2007 )

Bruno Lamarche, Louis Rivest. 2007. « Achieving a dynamic product model with inter-features associations ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

Bruno Lamarche, Louis Rivest. 2007. « Dynamic product modeling with inter-features associations: comparing customization and automation ». International Computer Aided Design Conference and Exhibition (CAD) (Honolulu, HI, USA, June 25-29, 2007) p. 877-886.

Bruno Lamarche, Louis Rivest. 2007. « Dynamic product modeling with inter-features associations: Comparing customization and automation ». Computer-Aided Design and Applications. vol. 4 , nº 6. p. 877-886.

Roland Maranzana, Omar Msaaf, Louis Rivest. 2007. « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) ( Trois-Rivières, QC, Canada, 7-11 mai 2007 )

Omar Msaaf, Roland Maranzana, Louis Rivest. 2007. « Part data mining for information re-use in a PLM context ». ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007) p. 187-194. New York, NY, USA : American Society of Mechanical Engineers.

B. Balout, Victor Songmene, Jacques Masounave. 2007. « An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ». Journal of Manufacturing Processes. vol. 9 , nº 1. p. 23-34.

Félicia Etsida Mpiga, Thien-My Dao, Victor Songmene. 2007. « The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ». Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007) APIEM & CIIE.

R. Khettabi, Victor Songmene, Jacques Masounave. 2007. « Effect of tool lead angle and chip formation mode on dust emission in dry cutting ». Journal of Materials Processing Technology. vol. 194 , nº 1-3. p. 100-109.

R. Khettabi, Victor Songmene, Jacques Masounave. 2007. « Modeling of fine dust during machining ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007) Montréal : École de technologie supérieure.

Luc Parent, Victor Songmene, Jean Pierre Kenné. 2007. « A generalised model for optimising an end milling operation ». Production Planning & Control . vol. 18 , nº 4. p. 319-337.

Victor Songmene. 2007. « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels ( Montréal, QC, Canada, 2007 )

Victor Songmene, Jacques Masounave, R. Khettabi. 2007. « Dry machining and its effects on productivity, costs, environment and machine-shop air quality ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007) p. 51-60.

Victor Songmene, Jacques Masounave, R. Khettabi. 2007. « Safe, environmentally-friendly and cost effective machining ». Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007) p. 44-48.

Imed Zaghbani, Victor Songmene, R. Khettabi. 2007. « A simplified numerical model for orthogonal cutting ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007) p. 152-157.

Imed Zaghbani, Victor Songmene, R. Khettabi. 2007. « Modeling of thin wall-parts deflection during high speed milling ». 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007) p. 111-115.

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Genetic algorithms and finite element coupling for mechanical optimization ». 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007) p. 87-96. Southampton, UK : WITPress.

G. Corriveau, Raynald Guilbault, Antoine Tahan. 2007. « Optimisation d'une turbine hydroélectrique par algorithmes génétiques ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

L. Lacasse, Antoine Tahan, Zhaoheng Liu. 2007. « Automatic characterization of wood board surface defects ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

Antoine Tahan, Zhaoheng Liu, L. Lacasse. 2007. « New method for characterization of wood ». 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

A. Szymanski, J. Masounave, M. Viens. 2007. « Les différentes sources d’émission de particules fines et ultrafines dans l’air ». Premier congrès international sur l'ingénierie des risques industriels : CIRI 2007 : Montréal (Québec) Canada, 17-18 et 19 décembre 2007 : actes (Montréal, QC, Canada, 17-19 déc. 2007) Montréal : École de technologie supérieure.

K. Soufi, Jean-François Chatelain, Roland Maranzana. 2006. « A product change management system based on active features ». 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)

Vladimir Brailovski, S. D. Prokoshkin, I. Yu Khmelevskaya, K. E. Inaekyan, V. Demers, E. Bastarache, S. V. Dobatkin, E. V. Tatyanin. 2006. « Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ». Materials Science and Engineering : A. vol. 438-440 p. 597-601.

Vladimir Brailovski, Sergui D. Prokoshkin, Irina Yu. Khmelevskaya, Karine E. Inaekyan, Vincent Demers, Sergui V. Dobatkin, Evgeny V. Tatyanin. 2006. « Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ». Materials Transactions. vol. 47 , nº 3. p. 795-804.

V. Demers, Vladimir Brailovski, S. Prokoshkin, K. Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. 2006. « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Journal of ASTM International. vol. 3 , nº 6.

S. D. Prokoshkin, Vladimir Brailovski, I. Yu Khmelevskaya, S. V. Dobatkin, K. E. Inaekyan, V. Demers, E. Bastarache, E. V. Tatianin. 2006. « Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ». Bulletin of the Russian Academy of Sciences : Physics. vol. 70 , nº 9. p. 1536-1541.

H. Al-Kazzaz, M. Medraj, X. Cao, M. Xiao, M. Jahazi. 2006. « Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ». Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006) p. 503-518. Canadian Institute of Mining, Metallurgy and Petroleum.

Nabil Boutana, Philippe Bocher, Mohammad Jahazi, D. Piot, F. Montheillet. 2006. « Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ». Matériaux 2006 (Dijon, France, 13-17 nov. 2006) p. 781-790.

X. Cao, M. Jahazi, J. P. Immarigeon, W. Wallace. 2006. « A review of laser welding techniques for magnesium alloys ». Journal of Materials Processing Technology. vol. 171 , nº 2. p. 188-204.

X. Cao, M. Jahazi, R. Mehta. 2006. « Friction stir welding of AZ31B-H24 magnesium alloy butt joints ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) p. 279-289. TWI Ltd.

X. Cao, M. Xiao, M. Jahazi. 2006. « Effect of processing parameters on laser cladding of magnesium alloy castings ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) p. 147-158. Canadian Institute of Mining, Metallurgy and Petroleum.

X. Cao, M. Xiao, M. Jahazi, T. Shariff. 2006. « Surface cladding of magnesium alloy castings using Nd:YAG laser ». Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006) p. 359-364. Warrendale, Pa : The Minerals, Metals & Materials Society.

L. Dubourg, F. O. Gagnon, F. Nadeau, L. St-Georges, M. Jahazi. 2006. « Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ». 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006) p. 419-430. TWI.

L. Dubourg, M. Jahazi, G. Dezaise, P. Bocher. 2006. « Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ». Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006) p. 107-120. Canadian Institute of Mining, Metallurgy and Petroleum.

J. Gholipour, M. Jahazi. 2006. « Effect of lubricant in hydroforming of Ni-based super alloy tubes ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) p. 447-460. Canadian Institute of Mining, Metallurgy and Petroleum.

Michel Humbert, L. Germain, N. Gey, Philippe Bocher, M. Jahazi. 2006. « Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ». Materials Science and Engineering : A. vol. 430 , nº 1-2. p. 157-164.

F. Jalilian, R. A. L. Drew, M. Jahazi. 2006. « Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) p. 315-326. Canadian Institute of Mining, Metallurgy and Petroleum.

F. Jalilian, M. Jahazi, R. A. L. Drew. 2006. « Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ». Materials Science and Engineering A. vol. 423 , nº 1-2. p. 269-281.

A. R. Khodabandeh, M. Jahazi, S. Yue, S. T. Aghdashi. 2006. « The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ». Materials and Manufacturing Processes. vol. 21 , nº 1. p. 105-110.

E. Uta, M. Humbert, N. Gey, P. Bocher, M. Jahazi. 2006. « Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ». Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006) Dijon : Université de Bourgogne.

P. Vo, S. Yue, M. Jahazi. 2006. « Microstructure development of a near alpha-titanium alloy during high temperature deformation ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) p. 473-484. Canadian Institute of Mining, Metallurgy and Petroleum.

X. Wang, M. Jahazi, S. Yue. 2006. « Substructure of high temperature compressed titanium alloy IMI 834 ». Materials Science and Engineering A. vol. 434 , nº 1-2. p. 188-193.

P. Wanjara, M. Brochu, M. Jahazi. 2006. « Thin gauge titanium manufacturing using multiple-pass electron beam welding ». Materials and Manufacturing Processes. vol. 21 , nº 5. p. 439-451.

Priti Wanjara, M. Jahazi, H. Monajati, S. Yue. 2006. « Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ». Materials Science and Engineering A. vol. 416 , nº 1-2. p. 300-311.

M. Xiao, P. Wanjara, M. Jahazi, C. Poon. 2006. « Nd:Yag-laser welding of Inconel 718 alloy ». Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006) p. 395-412. Canadian Institute of Mining, Metallurgy and Petroleum.

Nadjib Bouikni, Alain Desrochers, Louis Rivest. 2006. « A product feature evolution validation model for engineering change management ». Journal of Computing and Information Science in Engineering. vol. 6 , nº 2. p. 188-195.

M.A. El Hani, Louis Rivest, C. Fortin. 2006. « On specifying an information management tool to support manufacturing process planning in aerospace: a case study ». ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Philadelphia, PA, USA, Sept. 10-13, 2006) p. 143-151. New York, NY, USA : American Society of Mechanical Engineers.

Louis Rivest. 2006. « Drawingless product development process ». Communication lors de la conférence : Consortium for Research and Innovation in Aerospace in Quebec PLM Workshop (CRIAQ) ( Longueuil, QC, Canada, Apr. 5, 2006 )

Louis Rivest, Omar Msaaf. 2006. « La MNS et son courtier pour une exploitation efficace de la géométrie en MDO ». Communication lors de la conférence : Journée MOSAIC ( Montréal, QC, Canada, 31 mai 2006 )

T.G. Tremblay, Louis Rivest, O. Msaaf, Roland Maranzana. 2006. « The role of associations in CAD and PLM for handling change propagation during product development ». Leading the Web in concurrent engineering : next generation concurrent engineering (Antibes, France, Sept. 18-21, 2006) p. 507-514. Amsterdam, The Netherlands : IOS Press.

Bahaa Balout, Victor Songmene, Jacques Masounave. 2006. « Usinabilité d'alliages légers et des composites lors du perçage à sec ». Transactions of the Canadian Society for Mechanical Engineering. vol. 30 , nº 3. p. 329-343.

J.P. Michaud, Victor Songmene, Antoine Tahan. 2006. « Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ». 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006) Canada : The Metallurgy and Materials Society.

D.R. Njoya, R. Khettabi, Victor Songmene, Jacques Masounave. 2006. « Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ». 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006) Montreal, Canada : Institut canadien des mines.

Martin Gagnon, Antoine Tahan, André Coutu, Marc Thomas. 2006. « Analyse modale opérationnelle en présence d'excitations harmoniques : étude de cas sur des composantes de turbine hydroélectrique ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montréal, QC, Canada, 25-27 oct. 2006) p. 320-329. Calgary, Canada : ACVM.

Jean-François Chatelain. 2005. « A level-based optimization algorithm for complex part localization ». Precision Engineering. vol. 29 , nº 2. p. 197–207.

K. E. Inaekyan, S. D. Prokoshkin, V. Brailovski, I. Yu. Khmelevskaya, V. Demers, S. V. Dobatkin, E. V. Tatyanin, E. Bastarache. 2005. « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ». Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005) p. 597-602. Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.

S. Prokoshkin, Vladimir Brailovski, I. Khmelevskaya, S. Dobatkin, K. Inaekyan, V. Turilina, V. Demers, E. Tat'yanin. 2005. « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment. vol. 47 , nº 5-6. p. 182-187.

H. Al-Kazzaz, M. Medraj, X. Cao, M. Jahazi, X. Min. 2005. « Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ». Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005) p. 137-149. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

P. Bocher, M. Jahazi, L. Germain, N. Gey, M. Humbert. 2005. « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) p. 523-530. Montréal, Qué., Canada : École de technologie supérieure.

Philippe Bocher, Mohammad Jahazi, Lionel Germain, Priti Wanjara, Nathalie Gey, Michel Humbert. 2005. « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena. vol. 105 p. 127-132.

N. Boutana, P. Bocher, M. Jahazi, J. Savoie, D. Piot, F. Montheillet. 2005. « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) p. 273-280. Montréal, Qué., Canada : École de technologie supérieure.

X. Cao, M. Jahazi. 2005. « Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ». Materials Science and Technology. vol. 21 , nº 10. p. 1192-1198.

X. Cao, M. Jahazi. 2005. « Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ». Materials Science and Engineering A. vol. 408 , nº 1–2. p. 234-242.

X. Cao, M. Xiao, M. Jahazi, J. P. Immarigeon. 2005. « Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ». Materials and Manufacturing Processes. vol. 20 , nº 6. p. 987-1004.

X. Cao, M. Xiao, M. Jahazi, Y. L. Lin. 2005. « Nd:YAG laser welding of magnesium alloy castings ». Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005) p. 441-443. The Minerals, Metals & Materials Society.

L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2005. « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». Materials Science Forum. Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) p. 663-668. Trans Tech Publications.

L. Germain, N. Gey, M. Humbert, A. Hazotte, P. Bocher, M. Jahazi. 2005. « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization. vol. 54 , nº 3. p. 216-222.

Lionel Germain, Nathalie Gey, Ludovic Humbert, Philippe Bocher, Mohammad Jahazi. 2005. « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia. vol. 53 , nº 13. p. 3535-3543.

F. Jalilian, R. A. L. Drew, M. Jahazi. 2005. « Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ». Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005) p. 873-878. Pine Mountain, GA, United states : ASM International.

Ali Reza Khodabandeh, Mohammad Jahazi, Steve Yue, Philippe Bocher. 2005. « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International. vol. 45 , nº 2. p. 272-280.

H. Monajati, A. K. Taheri, M. Jahazi, S. Yue. 2005. « Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 36 , nº 4. p. 895-905.

H. Monajati, F. Zarandi, M. Jahazi, S. Yue. 2005. « Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ». Scripta Materialia. vol. 52 , nº 8. p. 771-776.

P. Wanjara, C. Booth-Morrison, E. Hsu, M. Jahazi. 2005. « Process optimization for linear friction welding of Ti-6Al-4V ». Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005) p. 855-860. ASM International.

P. Wanjara, M. Brochu, S. Girard, M. Jahazi. 2005. « Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ». Materials Science and Technology. vol. 21 , nº 5. p. 613-618.

P. Wanjara, M. Brochu, M. Jahazi. 2005. « Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ». Materials Characterization. vol. 54 , nº 3. p. 254-262.

P. Wanjara, M. Jahazi. 2005. « Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ». Metallurgical and Materials Transactions A : Physical Metallurgy and Materials Science. vol. 36 , nº 8. p. 2149-2164.

P. Wanjara, M. Jahazi, H. Monajati, S. Yue, J. P. Immarigeon. 2005. « Hot working behavior of near-α alloy IMI834 ». Materials Science and Engineering A. vol. 396 , nº 1–2. p. 50-60.

P. Wanjara, H. Monajati, M. Jahazi, L. Germain, P. Bocher, J.-P. Immarigeon. 2005. « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) p. 15-26. Association for Iron and Steel Technology.

Xuan-Tan Pham, Phil Bates, Amy Chesney. 2005. « Modeling of thermoforming of low-density glass mat thermoplastic ». Journal of Reinforced Plastics and Composites. vol. 24 , nº 3. p. 287-298.

O. Msaaf, Louis Rivest. 2005. « Le courtage de données numériques structurées : un catalyseur pour l'optimisation multidisciplinaire ». Communication lors de la conférence : 2e Journée MOSAIC ( Montréal, QC, Canada, 9 sept. 2005 )

T.G. Tremblay, Louis Rivest, Bruno Lamarche, Roland Maranzana. 2005. « Vers une application généralisée du concept de lien technologique en développement de produits : Terminologie des associations ». Communication lors de la conférence : 24e Salon International des Systèmes d'Information, Technologies, Méthodologies et Services pour la Conception, la Fabrication et la Gestion du Cycle de vie Produit (MICAD) ( Paris, France, 5-7 avril 2005 )

J. P. Castonguay, A. S. Tahan. 2005. « Correlated characteristics identification and effect in statistical tolerance design ». WSEAS Transactions on Mathematics. vol. 4 , nº 4. p. 319-326.

Martin Viens, Z. Wang. 2005. « HBAR-spectroscopy used for materials characterization ». 32nd Annual Review of Process in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, Jul. 31-Aug. 5, 2005) Melville, NY, USA : American Institute of Physics.

B. Antri, Jean-François Chatelain, Françoise Marchand. 2004. « An integrated information model for the dimensional and geometrical inspection of mechanical parts ». 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Bath, UK, Apr. 5-7, 2004) p. 43. Bath, UK : University of Bath.

Jean-François Chatelain, Y. Boutin, Françoise Marchand, Antoine Tahan. 2004. « Productivity assessment from advanced integration of canned cycles to CAD/CAM software ». WSEAS Transactions on Systems. vol. 3 , nº 3. p. 1187-92.

Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2004. « An innovative software architecture to improve information flow from CAM to CNC ». Computers & Industrial Engineering. vol. 46 , nº 4. p. 655-667.

Étienne Fortin, Louis Rivest, Jean-François Chatelain. 2004. « Combiner de multiple langages pour la programmation des contrôleurs de machines-outils à architecture ouverte ». Transactions of the Canadian Society for Mechanical Engineering. vol. 28 , nº 3-4. p. 511-530.

Antoine Tahan, Victor Songmene, Jean-François Chatelain. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering ( San Francisco, CA, USA, Nov., 2004 )

M. Brochu, S. Girard, M. Jahazi. 2004. « Electron beam free forming using brazing paste and solid wires as filler metal ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) p. 323-334. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

X. Cao, M. Xiao, M. Jahazi. 2004. « Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ». Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004) p. 187-197. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

M. Jahazi, S. Hossein-Nejad. 2004. « The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ». Journal of Materials Processing Technology. vol. 152 , nº 3. p. 272-275.

F. Jalilian, M. Jahazi, R. A. L. Drew, J-P. Immarigeon. 2004. « The influence of processing parameters on TLP joining of Inconel 617 alloy ». 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004) p. 263-274. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

A. R. Mashreghi, H. Monajatizadeh, M. Jahazi, S. Yue. 2004. « High temperature deformation of nickel base superalloy Udimet 520 ». Materials Science and Technology. vol. 20 , nº 2. p. 161-166.

H. Monajati, M. Jahazi, R. Bahrami, S. Yue. 2004. « The influence of heat treatment conditions on gamma characteristics in Udimet 720 ». Materials Science and Engineering A. vol. 373 , nº 1-2. p. 286-293.

Nadjib Bouikni, Alain Desrochers, Louis Rivest. 2004. « Flux de travaux dynamiques pour la gestion des évolutions des Features du produit ». Conference International de Mécanique Avancée (CIMA) (Boumerdès, Algérie, 30 nov.-2 déc. 2004)

J. Brunette, M. Jeu-Herault, Victor Songmene, Jacques Masounave. 2004. « Understanding and characterizing the drilling of recycled plastics ». Machining Science and Technology. vol. 8 , nº 1. p. 141-170.

Y. Amtout, Victor Songmene, Jean-François Chatelain. 2003. « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation ( Montreal, QC, Canada, June 9, 2003 )

Jean-François Chatelain. 2003. « Laboratoire d'ingénierie des produits, procédés et systèmes de l'ÉTS ». Communication lors de la conférence : 3e Journée d'Étude Interinstitutionnelle du Centre de Recherche en Fabrication Haute Performance ( Bécancour, QC, Canada, 21 nov. 2003 )

Jean-François Chatelain, Y. Boutin. 2003. « Intégration de cycles d'usinage avancés aux logiciels de CFAO ». Communication lors de la conférence : 4th International Conference on Industrial Automation ( Montreal, QC, Canada, June 9, 2003 )

L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi. 2003. « Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ». Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003) p. 1283-1290. Weinheim, Allemagne : Wiley-VCH.

M. Jahazi, A. Samadi, S. Yue. 2003. « Determination of the optimum forging conditions for a 7075 aluminum alloy ». Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003) p. 433-444. [Canadian Institute of Mining, Metallurgy and Petroleum].

F. Giguère, Louis Rivest, Alain Desrochers. 2003. « Improving design productivity and product data consistency ». Feature Based Product Life-Cycle Modelling : IFIP TC5 / WG5.2 & WG5.3 Conference on Feature Modelling and Advanced Design-for-the-Life-Cycle Systems (FEATS 2001) June 12–14, 2001, Valenciennes, France (Valenciennes, France, June 12-14, 2001) p. 77-91. Norwell, MA, USA : Springer.

L. Marguerit, M. Balazinski, Victor Songmene. 2003. « Drilling of MMC : influence of cutting conditions on part roughness and form error ». Communication lors de la conférence : CIRP Workshop ( Paris, France, Jan., 2003 )

Y. Boutin, Jean-François Chatelain. 2002. « Intégration des cycles d'usinage avancés aux logiciels de FAO ». Communication lors de la conférence : Séminaire sur l'Usinage à Grande Vitesse ( Longueuil, QC, Canada, sept. 2002 )

Jean-François Châtelain. 2002. « Développement d'un post-processeur et d'un simulateur pour une machine 5 axes (phase 1) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) p. 43-48. École de technologie supérieure.

Jean-François Châtelain. 2002. « Optimisation d'un post-processeur 5 axes et développement d'outillage spécialisé (phase II) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) p. 49-53. École de technologie supérieure.

Jean-François Chatelain, C. Fortin. 2002. « Optimal workpiece localization for machining applications ». In Integrated design and manufacturing in mechanical engineering . p. 247-254. Kluwer Academic Publishers.

Jean-François Chatelain, C. Fortin. 2002. « Optimal workpiece localization for machining applications ». 3rd Integrated Design and Manufacturing in Mechanical Engineering Conference (Montreal, Canada, May, 2000) p. 247-254. Netherlands : Springer-Verlag.

Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002. « A solid model comparison approach based on a model tree analysis ». In Advances in systems theory, mathematical methods and applications . p. 239-244. WSEAS Press.

Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002. « A solid model comparison approach based on a model tree analysis ». 4th WSEAS International Conference on Mathematics and Computers in Physics (MCP) (Cancun, Mexico, May 12-16, 2002) WSEAS.

Patrick Terriault, Jean-François Châtelain. 2002. « Développement de travaux personnalisés en conception assistée par ordinateur ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) p. 65-68. École de technologie supérieure.

M. Jahazi, J. J. Jonas. 2002. « The non-equilibrium segregation of boron on original and moving austenite grain boundaries ». Materials Science and Engineering A. vol. 335 , nº 1-2. p. 49-61.

M. Jahazi, A. R. Mashreghi. 2002. « Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ». Materials Science and Technology. vol. 18 , nº 4. p. 458-462.

F. Giguere, Louis Rivest, Alain Desrochers, Roland Maranzana. 2002. « Les caractéristiques contextuelles : une solution pour accroître la productivité en CAO : De la CAO géométrique vers une CAO fonctionnelle ». Revue internationale de CFAO et d'informatique graphique. vol. 17 , nº 1-2. p. 105-122.

Louis Rivest. 2002. « Computer-aided design of aerospace components tools and implementation ». ASEE Annual Conference and Exposition: Vive L'ingenieur (Montreal, Canada, June 16-19, 2002) p. 8567-8574. Washington, DC, USA : American Society for Engineering Education.

Louis Rivest, Roland Maranzana, A. Desrochers. 2002. « Maintaining data consistency through integrated product process change management ». Communication lors de la conférence : 3rd Annual AIAC Aerospace Technology Collaboration Forum ( Montreal, QC, Canada, May 1-2, 2002 )

Victor Songmene, Bahaa Balout, Jacques Masounave. 2002. « Drilling of metal matrix composites : cutting forces and chip formation ». International Symposium on Enabling Technologies for Light Metals and Composite Materials and their End-Products (Montreal, QC, Canada, Aug. 11-14, 2002) p. 633-651. Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Victor Songmene, M. Jeu-Herault, M. Côté, M. Duval, Jacques Masounave. 2002. « Généralités sur l'aluminium dans les alliages d'aluminium moulés : connaissances et pratiques ». CQRDA, CTIF.

Jean-François Chatelain, C. Fortin. 2001. « Balancing technique for optimal blank part machining ». Precision Engineering. vol. 25 , nº 1. p. 13-23.

Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2001. « Improving information flow from CAM to CNC : an innovative architecture based on BNCL virtual machine ». 29th International Conference on Computers and Industrial Engineering (Montreal, QC, Canada, Nov. 1-3, 2001) Montreal, Canada : École de technologie supérieure.

S. St-Martin, Jean-François Chatelain, Louis Rivest, Roland Maranzana. 2001. « L'évolution du modèle produit dans un contexte de SGDT: Vers la maîtrise du changement dans les modèles CAO ». 20e congrès international de la CFAO et des nouvelles technologies de conception et de fabrication (MICAD 2001) (Paris, France, 6-8 mars 2001)

M. Jahazi, B. Eghbali. 2001. « The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ». Journal of Materials Processing Technology. vol. 113 p. 594-598.

M. Jahazi, A. Khodabandeh, S. T. Aghdashi. 2001. « A method to improve the toughness of forged microalloyed steels ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001) p. 3-10.

F. K. Shafie, M. Jahazi, M. Abassi. 2001. « Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ». Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001) p. 434-441.

F. K. Shafie, M. Jahazi, Y. Kharazi, M. Abassi. 2001. « Thermomechanical processing of T-250 maraging steel ». Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001) p. 41-48.

N. Bouikni, A. Desrochers, Louis Rivest. 2001. « Réalisation d'une architecture multi-vues pour la CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : 69e Congrès de l'ACFAS ( Sherbrooke, QC, Canada, 14-17 mai 2001 )

N. Bouikni, A. Desrochers, Louis Rivest. 2001. « Élaboration d'une architecture multi-vues en CAO appliquée au domaine de l'aéronautique ». Communication lors de la conférence : Colloque IMSI 2001 ( Sherbrooke, QC, Canada, 2001 )

André Moreau, Martin Lord, Daniel Lévesque, Marc Dubois, Jean Bussière, Jean-Pierre Monchalin, Christian Padioleau, Guy Lamouche, Teodor Veres, Martin Viens, Harold Hébert, Pierre Basseras, Cheng-Kuei Jen. 2001. « On-line, non-destructive mechanical property measurement using laser-ultrasound ». «AISI/DOE Advanced Process Control Program Vol. 4 of 6» 10.2172/794988 110 p.

Jean-François Chatelain, C. Fortin. 2000. « Algorithme de localisation des pièces brutes pour l'usinage ». 3e conférence internationale sur la conception et la fabrication intégrées en mécaniques IDMME 2000 et Forum SCGM 2000 (Montréal, QC, Canada, Mai 2000) p. 1-10.

Roland Maranzana, Louis Rivest, Jean-François Chatelain. 2000. « Systèmes de CAO et ingénierie concourante : les effets pervers ». Communication lors de la conférence : Université d'Été de Recherche Francophone, Ingénierie Simultanée et Concourante (ISC 2000) ( Arc-et-Senans, France, 3-5 juil. 2000 )

S. T. Aghdashi, A. Khodabandeh, M. Jahazi. 2000. « The determination of optimum forging condiions for a vanadium containing microalloyed steel ». The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000) p. 404-409. The chinese society for metals.

S. Hossein Nedjad, M. Jahazi. 2000. « Failure analysis and manufacturing technology of seal strips ». Proceedings of the 4th International Manufacturing Conference (Tehran, Iran, ) p. 285-292.

M. Jahazi, G. Ebrahimi. 2000. « Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ». Journal of Materials Processing Technology. vol. 103 , nº 3. p. 362-366.

M. Jahazi, B. Egbali. 2000. « Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ». Journal of Materials Processing Technology. vol. 103 , nº 2. p. 276-279.

Mohammad Jahazi, M. Ghomi. 2000. « Texture evolution in two deep drawn aluminum alloys ». J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000) p. 707-713. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

H. Monajati, M. Jahazi, H. Hosseini. 2000. « A computer code for the evaluation of the residual life of different boiler components ». Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000) p. 223-231.

A. Samadi, M. Jahazi. 2000. « The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ». Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000) p. 703-712.

L. Macabies, A. Desrochers, L. Rivest, Roland Maranzana. 2000. « Liens multi-modèles en CAO: application au rivetage en aéronautique ». IDMME' 2000 (Montréal, QC, Canada, 16-19 mai 2000) Montréal, QC, Canada : Presses internationales Polytechnique.

L. Rivest, S. Rompala, Y. Bourgeois, C. Tessier, P. Bagshaw. 2000. « Computer simulation helps produce complex composite parts for Canadair Jets ». CAD Systems. vol. 18 , nº 7. p. 14-15.

Louis Rivest, Steve Rompala, Yvon Bourgeois. 2000. « Software helps build a better composite part ». Machine Design. vol. 72 , nº 10. p. 90-92.

Victor Songmene. 2000. « Usinage des composites à matrice d'alliage d'aluminium GrA-Ni ». 200 p. Thèse de doctorat. Montréal , École Polytechnique de Montréal

Jean-François Chatelain, C. Fortin. 1999. « A CAD/CAM integrated balancing system for blank part machining ». Troisième conférence internationale sur l'automatisation industrielle, École de technologie supérieure, Montréal, 7-9 juin 1999 : actes de la conférence = Third International Conference on Industrial Automation, École de technologie supérieure, Montréal, (Montreal, Canada, June 7-9, 1999) p. 23/9-23/12. Montreal, Canada : International Association of Industrial Automation.

M. Jahazi, F. Jalilian. 1999. « The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ». Composites Science and Technology. vol. 59 , nº 13. p. 1969-1975.

Jean-François Chatelain. 1998. « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 ( Laval, QC, Canada, nov. 1998 )

Jean-François Chatelain. 1998. « Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ». Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998) Québec, QC, Canada : Université Laval.

M. Jahazi. 1998. « The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ». Metals and Materials. vol. 4 , nº 4. p. 818-822.

M. Jahazi, G. Ebrahimi. 1998. « Flow localization during the forming of an ultra high strength steel ». Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998) p. 1445-1452.

H. Monajati, M. Jahazi. 1998. « Residual life evaluation of critical boiler parts ». Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998) p. 757-767.

Clément Fortin, Carl-Éric Aubin, F. Salako, B. Côté, C. Gamache, Louis Rivest. 1998. « Introduction à l'utilisation du logiciel CATIA ». Montréal, Canada : École polytechnique.

L. Rivest. 1998. « The digital implementation at bombardier aerospace : the next stretch ». CATIA Solutions magazine. vol. 2 , nº 6. p. 42-43.

J. Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J. P. Monchalin. 1998. « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Polymer Composites. vol. 19 , nº 3. p. 225-232.

M. Choquet, D. Lévesque, C. Néron, B. Reid, M. Viens, J.-P. Monchalin, J. P. Komorowski, R. W. Gould. 1998. « Detection of corrosion in aging aircraft structures by laser-ultrasonics ». Nondestructive Characterization of Materials VIII (Boulder, CO, USA, June 15-20, 1997) p. 73-78. Boston, MA : Springer US.

J.-P. Monchalin, C. Néron, M. Choquet, A. Blouin, B. Reid, D. Lévesque, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998. « Laser-ultrasonics inspection and characterization of aeronautic materials ». Alliance of the Americas : the First Pan-American Conference : proceedings of the 1st Pan-American Conference (Toronto, ON, Canada, Sept. 14-18, 1998) Missisauga, Ont. : Canadian Society for Nondestructive Testing Inc..

J.-P. Monchalin, C. Néron, M. Choquet, D. Drolet, M. Viens, P. Bouchard, R. Héon, C. Padioleau. 1998. « Laser-ultrasonics inspection and characterization of aeronautic materials ». 7th European Conference on Non-destructive Testing (ECNDT) (Copenhagen, Denmark, May 26-29, 1998) p. 19-26. ECNDT.

M. Viens, H. Hébert, C. K. Jen. 1998. « Ultrasonic measurement of the remaining thickness of corroded cast iron samples ». III International Workshop--Advances in Signal Processing for NDE of Materials (Québec, QC, Canada, Aug. 05-08, 1997) p. 327-334. Columbus, OH : The American Society for Nondestructive testing.

M. Jahazi, M. Ghomi. 1997. « Microstructural evolution and formability in two aluminium alloys ». Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997) p. 757-767.

M. Jahazi, M. Goudarzi. 1997. « The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ». Journal of Materials Processing Technology. vol. 63 p. 610-613.

M. Jahazi, A. Samadi. 1997. « The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ». Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997) p. 195-202.

H. Wang, B. Cao, C. K. Jen, K. T. Nguyen, M. Viens. 1997. « On-line ultrasonic monitoring of the injection molding process ». Polymer Engineering and Science. vol. 37 , nº 2. p. 363-376.

Bin Cao, H. Wang, Chen-Kuei Jen, N. T. Nguyen, J. Legoux, Chee Ang Loong, Martin Viens. 1996. « Ultrasonic monitoring of injection molding and die casting ». Nondestructive Evaluation for Process Control in Manufacturing (Scottsdale, AZ, USA, Dec. 03-05, 1996) p. 173-186. SPIE.

J. D. N. Cheeke, Z. Wang, M. Viens. 1996. « Thermal sprayed coatings characterization by acoustic waves ». 1996 IEEE Ultrasonics Symposium : Proceedings (San Antonio, TX, USA, Nov. 03-06, 1996) p. 749-752. IEEE.

J.-Y. Chen, S. V. Hoa, C. K. Jen, M. Viens, J.-P. Monchalin. 1996. « Ultrasonic evaluation of graphite/epoxy composites with different curing conditions ». Composites '96 and Oriented Polymers Symposium : book of proceedings (Boucherville, QC, Canada, 09-11 oct. 1996) p. 249-259. National Research Council Canada, Industrial Materials Institute.

M. Dubois, M. Viens, A. Moreau, C. K. Jen. 1996. « Ultrasonic attenuation measurements at 300 MHz ». First half of the proceedings of the Twenty-Second Symposium on Quantitative Nondestructive Evaluation (Seattle, WA, United states, July 30-Aug. 04,1995) p. 1439-1446. New York : Plenum Press.

Xing Li, Zuoqing Wang, Cheng Kuei Jen, Martin Viens, J. David N. Cheeke. 1996. « Ultrasonic thin-walled tube wave structure for sensing devices ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 43 , nº 2. p. 331-336.

Yuan Liu, Martin Viens, David Cheeke. 1996. « Behavior of extensional modes in a thin rod immersed in a viscous medium ». Journal of the Acoustical Society of America. vol. 99 , nº 2. p. 706-712.

J.-P. Monchalin, C. Néron, G. Vaudreuil, A. Blouin, D. Drolet, M. Dubois, M. Viens, P. Bouchard, M. Choquet, R. Héon, C. Padioleau, J.-D. Aussel. 1996. « Laser-ultrasonics for inspection and characterization of aeronautic materials ». AeroMat '96 (Dayton, OH, USA, June 03-06, 1996)

M. Viens, D. Drolet, A. Blouin, J.-P. Monchalin, C. Moreau. 1996. « Nondestructive characterization of plasma sprayed coatings by laser ultrasonics ». Thermal spray 1996: Practical solutions for engineering problems, proceedings of the 9th National thermal spray conference (Cincinnati, OH, USA, Oct. 07-11, 1996) p. 947-951. ASM International.

Martin Viens, Daniel Lévesque, Chen-Kuei Jen, Harold Hébert. 1996. « In-situ ultrasonic thickness measurement of underground water mains ». Nondestructive Evaluation of Utilities and Pipelines (Scottsdale, AZ, USA, Dec. 03-05, 1996) p. 157-164. SPIE.

Martin Viens, Paul C. H. Li, Zuoqing Wang, Cheng Kuei Jen, Michael Thompson, J. David N. Cheeke. 1996. « Mass sensitivity of thin rod acoustic wave sensors ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. vol. 43 , nº 5. p. 852-857.

M. Goudarzi, M. Jahazi, A. Fallahi. 1995. « The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ». Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995) p. 179-186.

M. Jahazi, M. Hosseinpour. 1995. « Fracture surface analysis of a welded ultra high strength steel ». The Metallurgist. vol. 3 p. 10-17.

M. Jahazi, F. Jalilian. 1995. « The determination of optimum fiber surface treatment for the production of Cu-Gr composites ». Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995) p. 220-228. Japan Society of Mechanical Engineers.

M. Jahazi, F. Jalilian. 1995. « The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ». Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995) p. 439-446.

X. Li, J. D. N. Cheeke, Z. Wang, C. K. Jen, M. Viens, G. Yi, M. Sayer. 1995. « Ultrasonic thin-walled tube wave devices for sensor applications ». Applied Physics Letters. vol. 67 , nº 1. p. 37-39.

M. Hosseinpour, M. Jahazi. 1994. « Optimum welding of AISI 4130 steel ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) p. 214-221.

M. Hosseinpour, M. Jahazi. 1994. « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994) p. 120-127.

F. Jalilian, M. Jahazi. 1994. « The effect of surface treatments on the physical behavior of copper-graphite composites ». International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994) p. 326-334.

F. Jalilian, A. Sedghi, M. Jahazi. 1994. « The influence of carbon fiber surface treatment on the mechanism of copper growth ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) p. 269-274.

H. Sadeghi, M. Shariati, M. Jahazi. 1994. « A computer code for the prediction of forming steps in precision forging ». Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) p. 167-174.

Louis Rivest, Clément Fortin, Claude Morel. 1994. « Tolerancing a solid model with a kinematic formulation ». Computer-Aided Design. vol. 26 , nº 6. p. 465-476.

Marek Balazinksi, Victor Songméné. 1994. « Fraisage de l'Inconel 600 à avance variable ». Communication lors de la conférence : 62e Congrès de l'ACFAS ( Montréal, QC, Canada, 16-20 mai 1994 )

X. Li, Z. Wang, C. K. Jen, M. Viens, J. D. N. Cheeke, G. Yi, M. Sayer. 1994. « Ultrasonic thin wall tube wave sensors ». 1994 Proceedings of IEEE Ultrasonics Symposium (Cannes, France, Oct. 31-Nov. 03, 1994) p. 623-628. IEEE.

M. Viens, Y. Tsukahara, C. K. Jen, J. D. N. Cheeke. 1994. « Leaky torsional acoustic modes in infinite clad rods ». Journal of the Acoustical Society of America. vol. 95 , nº 2. p. 701-707.

I. A. Akmoulin, M. Djahazi, N. D. Buravova, J. J. Jonas. 1993. « Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ». Materials Science and Technology. vol. 9 , nº 1. p. 26-33.

Louis Rivest, C. Fortin, Alain Desrochers. 1993. « Tolerance modeling for 3D analysis – presenting a kinematic formulation ». Proceedings of 3rd CIRP seminars on computer aided tolerancing = Tolérancement géométrique (Cachan, France, Apr. 27-28, 1993) p. 51-74. Paris, France : Éditions Eyrolles.

Louis Rivest, Clément Fortin, Claude Morel. 1993. « Tolerancing a solid model with a kinematic formulation ». Proceedings of the 2nd Symposium on Solid Modeling and Applications (Montreal, QC, Canada, May 19-21, 1993) p. 357-366. New York, NY, United States : ACM.

S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra. 1993. « A generalized model of satured synchronous machines ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) p. 585-590. International Association for Mathematics and Computers in Simulation.

S. A. Tahan, I. Kamwa, P. Viarouge, M. Ferfra, H. Le-Huy. 1993. « Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ». Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) p. 603-608. International Association for Mathematics and Computers in Simulation.

Y. Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1993. « Anomalous magnetoelastic waves in nickel wire ». Journal of Applied Physics. vol. 73 , nº 5. p. 2584-2586.

M. Viens, P. C. H. Li, Z. Wang, C. K. Jen, M. Thompson, J. D. N. Cheeke. 1993. « Gravimetric response of thin rod acoustic wave sensors ». 1993 Proceedings IEEE Ultrasonics Symposium (Baltimore, MD, USA, Oct. 31-Nov. 03, 1993) p. 359-364. IEEE.

Martin Viens. 1993. « Conception et caractérisation de capteurs acoustiques ». Thèse de doctorat. Sherbrooke , Université de Sherbrooke

M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992. « Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ». Materials Science and Technology. vol. 8 , nº 7. p. 628-636.

M. Djahazi, X. L. He, J. J. Jonas, W. P. Sun. 1992. « Nb(C, N) Precipitation and Austenite Recrystallization in Boron-containing high-strength low-alloy steels ». Metallurgical transactions. A, Physical metallurgy and materials science. vol. 23 A , nº 8. p. 2111-2120.

F. Jalilian, A. Sedghi, M. Jahazi. 1992. « The influence of chemical surface treatment on the wettability of carbon fibers ». Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992) p. 333-349.

M. Viens, Y. Liu, Z. Wang, C. K. Jen, J. D. N. Cheeke. 1992. « Investigations of extensional and torsional acoustic wave thin rod sensors ». First half of the proceedings of the Eighteenth Annual Review of Progress in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, July 28-Aug. 02, 1991) p. 1059-1065. New York : Springer Science+Business Media.

A. Akmoulin, M. Djahazi, J. J. Jonas. 1991. « Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ». Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991) p. 233-239. Tokyo, Japan :

I. A. Akmoulin, M. Djahazi, J. J. Jonas. 1991. « Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ». Scripta metallurgica et materialia. vol. 25 , nº 5. p. 1035-1040.

X. L. He, M. Djahazi, J. J. Jonas, J. Jackman. 1991. « The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ». Acta Metallurgica et Materialia. vol. 39 , nº 10. p. 2295-2308.

Souheil-Antoine Tahan, Abdallah El Chebair, John Dickinson. 1991. « Étude théorique de la stabilité des coques cylindriques soumises à un écoulement axial ». Communication lors de la conférence : 59e congrès de l'ACFAS ( Sherbrooke, QC, Canada, 21-24 mai 1991 )

C. K. Jen, J. C. H. Yu, Z. Wang, M. Viens, J. D. N. Cheeke, J. D. Dai. 1991. « Thin rod flexural acoustic wave devices: A sensor candidate ». Second half of the proceedings of the Seventeenth Annual Review of Progress in Quantitative Nondestructive Evaluation (La Jolla, California, July 15-20,1990) p. 2157-2163. New York : Plenum Press.

Yuan Liu, M. Viens, J. D. N. Cheeke, C. K. Jen. 1991. « Anomalous magnetoelastic waves in nickel wire ». IEEE Ultrasonics Symposium (Orlando, FL, USA, Dec. 08-11, 1991) p. 1075-1078. IEEE.

Zuoqing Wang, Martin Viens, Cheng-Kuei Jen, David Cheeke, Yuan Liu. 1991. « Analysis of thin rod acoustic wave gravimetric sensors ». Sensors and Materials. vol. 3 , nº 3. p. 159-172.

M. Djahazi, X. L. He, J. J. Jonas. 1990. « Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ». HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990) p. 230-238.

M. Djahazi, X. L. He, J. J. Jonas, L. Collins. 1990. « The effect of Nb and b on austenite recrystallization ». Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990) p. 681-687. TMS (The Minerals, Metals & Materials Society).

Martin Viens, J. David N. Cheeke. 1990. « Highly sensitive temperature sensor using SAW resonator oscillator ». Sensors and Actuators: A. Physical. vol. 24 , nº 3. p. 209-211.

Z. Wang, M. Viens, C. K. Jen, J. D. N. Cheeke, Y. Liu. 1990. « Analysis of thin rod acoustic wave gravimetric sensors ». IEEE Symposium on Ultrasonics (Honolulu, HI, USA, Dec. 04-07, 1990) p. 345-349. IEEE.

M. Djahazi, X. L. He, J. J. Jonas. 1988. « Effect of boron on the kinetics of precipitation in deformed austenite ». Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988) p. 246-253. Iron and Steel Institute of Japan.

M. Djahazi, X. L. He, J. J. Jonas, G. E. Ruddle. 1988. « Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ». Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987) p. 69-78.

M. Djahazi, X. L. He, J. J. Jonas. 1987. « Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ». 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987) p. 403-408.