Publications


2015 - 2016 


Articles accepted / in press

Assaad E, Maire M, Lerouge S. (2015) Injectable thermosensitive chitosan hydrogels with controlled gelation kinetics and enhanced mechanical resistance. Carbohydrate Polymers, 130:87-96. 

Bège T, Ménard J, Tremblay J, Denis R, Arnoux P-J, Petit Y. (2015) Biomechanical analysis of traumatic mesenteric avulsion. Medical and Biological Engineering and Computing, 53(2):187-94. 

Benmakrelouf S, Mezghani N, Kara N. (2015). Towards the Identification of Players' Profiles Using Game's Data Analysis Based on Regression Model and Clustering. Proceedings of the 2015 IEEE/ACM International Conference on Advances in Social Networks Analysis and Mining 2015, p. 1403-1410, doi>10.1145/2808797.2809429.

Bernier G, Petit Y, Marchand F, Terriault P, Nadeau S. (2015) Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. In: Nadeau S, Petit Y, Hallé S, Morency F, Dufresne L, editors. Chapter 9: Case study : Toy design. 2nd edition. Newcastle upon Tyne, UK: Cambridge Scholars Publishing. p. 79-86.

Blouin M, Lalumire M, Gagnon DH, Chénier F, Aissaoui R. (2015) Characterization of the immediate effect of a training session on a manual wheelchair simulator with haptic biofeedback: towards more effective propulsion. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 23(1):104-15. 

Lauzière S, Miéville C, Betschart M, Aissaoui R, Nadeau S. (2015) Plantarflexor weakness is a determinant of kinetic asymmetry during gait in post-stroke individuals walking with high levels of effort. Clinical Biomechanics 2015 Jul 11. DOI: http://dx.doi.org/10.1016/j.clinbiomech.2015.07.004.

Chénier F, Bigras P, Aissaoui R. (2015) A new dynamic model of the wheelchair propulsion on straight and curvilinear level-ground paths. Computer Methods in Biomechanics and Biomedical Engineering 2015; 18(10) : 1031-1043. DOI: 10.1080/10255842.2013.869318

Bourbonnais F, Bigras P, Bonev I. (2015) Minimum-time trajectory planning and control of a pick-and-place five-bar parallel robot. IEEE/ASME Transactions on Mechatronics, 20(2):740-9. 

Brais G, Ménard J, Mutch J, Laflamme GY, Petit Y, Rouleau DM. (2015) Transosseous braided-tape and double-row fixations are better than tension band for avulsion-type greater tuberosity fractures. Injury, 46(6):1007-12. 

Brummund MK, Sgard F, Petit Y, Laville F, Nelisse H. (2015) An axisymmetric finite element model to study the earplug contribution to the bone conduction occlusion effect. Acta Acustica united with Acustica, 101(4):775-88. 

Caouette C, Bureau MN, Vendittoli PA, Lavigne M, Nuño N. (2015) Influence of the stem fixation scenario on load transfer in a hip resurfacing arthroplasty with a biomimetic stem. Journal of the Mechanical Behavior of Biomedical Materials, 45:90-100. 

Clément J, Cresson T, Hagemeister N, Dumas R, de Guise JA. (2015) Estimating joint space of the knee during weight-bearing squatting activity using motion capture – preliminary results of a new method. Computer Methods in Biomechanics and Biomedical Engineering, 18(Suppl. 1):1910-1. 

Clément J, Dumas R, Hagemeister N, de Guise JA. (2015) Soft tissue artifact compensation in knee kinematics by multi-body optimization: Performance of subject-specific knee joint models. J Biomech, 48(14):3796-802. 

de Guise JA. (2015) KneeKG: A Canadian example of participative innovation in orthopaedic functional evaluation. Annals of Physical and Rehabilitation Medicine, 58(Suppl. 1):e52. 

Facchinello Y, Brailovski V, Petit Y, Brummund M, Tremblay J, Mac-Thiong J-M. (2015) Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement. Clinical Biomechanics, 30(10):1026-35. 

Fatimi A, Zehtabi F, Lerouge S. (2015) Optimization and characterization of injectable chitosan-iodixanol-based hydrogels for the embolization of blood vessels. Journal of Biomedical Materials Research - Part B Applied Biomaterials. (sous presse).

Gagnon D, Babineau A-C, Champagne A, Desroches G, Aissaoui R. (2015) Trunk and shoulder kinematic and kinetic and electromyographic adaptations to slope increase during motorized treadmill propulsion among manual wheelchair users with a spinal cord injury. BioMed Research International, 2015:15. 

Garcia J, Coste A, Tavares W, Nuño N, Lachapelle K. (2015) Assessment of competency during orotracheal intubation in medical simulation. British Journal of Anaesthesia, 115(2):302-7. 

Gotra A, Chartrand G, Massicotte-Tisluck K, Morin-Roy F, Vandenbroucke-Menu F, de Guise JA, et al. (2015) Validation of a semiautomated liver segmentation method using CT for accurate volumetry. Academic radiology, 22(9):1088-98. 

Guillot M, Chartrand G, Chav R, Rousseau J, Beaudoin J-F, Martel-Pelletier J, et al. (2015) [18F]-fluorodeoxyglucose positron emission tomography of the cat brain: A feasibility study to investigate osteoarthritis-associated pain. The Veterinary Journal, 204(3):299-303. 

Guillot M, Gravel P, Gauthier M-L, Leblond H, Tremblay M, Rossignol S, et al. (2015) Coxofemoral joint kinematics using video fluoroscopic images of treadmill-walking cats: development of a technique to assess osteoarthritis-associated disability. Journal of Feline Medicine and Surgery, 17(2):134-43. 

Jalani G, Naccache R, Rosenzweig DH, Lerouge S, Haglund L, Vetrone F, et al. (2015) Real-time, non-invasive monitoring of hydrogel degradation using LiYF4:Yb3+/Tm3+ NIR-to-NIR upconverting nanoparticles. Nanoscale, 7(26):11255-62. 

Joubair A, Zhao LF, Bigras P, Bonev I. (2015) Absolute accuracy analysis and improvement of a hybrid 6-DOF medical robot. Industrial Robot, 42(1):44-53. 

Kanhounou M, Cresson T, Clément J, Lavoie F, Hagemeister N, de Guise JA. (2015) 2D/3D registration of personalized knee 3D models on biplane radiographs for morpho-functional study. CARS 2010, 9(suppl. 1):S31-S2. 

Labbé D, Li D, Grimard G, de Guise JA, Hagemeister N. (2015) Quantitative pivot shift assessment using combined inertial and magnetic sensing. Knee Surgery, Sports Traumatology, Arthroscopy, 23(8):2330-8. 

Lauziere S, Mieville C, Betschart M, Aissaoui R, Nadeau S. (2015) Plantarflexor weakness is a determinant of kinetic asymmetry during gait in post-stroke individuals walking with high levels of effort. Clinical Biomechanics, 30(9):946-52. 

Leger St-Jean B, Ménard J, Hinse S, Petit Y, Rouleau DM, Beauchamp M. (2015) Braided tape suture provides superior bone pull-through strength than wire suture in greater tuberosity of the humerus. Journal of Orthopaedics, 12(Supplement 1):S14–S7. 

Lerouge S, Barrette J, Ruiz J-C, Sbai M, Savoji H, Saoudi B, et al. (2015) Nitrogen-rich plasma polymer coatings for biomedical applications: stability, mechanical properties and adhesion under dry and wet conditions. Plasma Process Polym, 12(9):882-95. 

Mehmanparast H, Mac-Thiong J-M, Petit Y. (2015) In vitro evaluation of pedicle screw loosening mechanism: a preliminary study on animal model. Scoliosis, 10(Suppl 1):O25. 

Mehmanparast H, Petit Y, Mac-Thiong J-M. (2015) Comparison of pedicle screw loosening mechanisms and the effect on fixation strength. Journal of Biomechanical Engineering, 137(12). 

Mezghani N, Gaudrault N, Mitiche A, Ayoubian L, Ouakrim Y, Hagemeister N, et al. (2015) Kinematic gait analysis of workers exposed to knee straining postures by Bayes decision rule. Artificial Intelligence Research, 4(2):106-11. 

Moevus A, Mignotte M, de Guise JA, Meunier J. (2015) A perceptual map for gait symmetry quantification and pathology detection. BioMedical Engineering OnLine, 14(1).

Nisol B, Watson S, Lerouge S, Wertheimer MR. (2015) Energetics of reactions in a dielectric barrier discharge with argon carrier gas: II mixtures with different molecules. Plasma Process Polym. (sous presse).

Ohl X, Hagemeister N, Zhang C, Billuart F, Gagey O, Bureau NJ, et al. (2015) 3D scapular orientation on healthy and pathologic subjects using stereoradiographs during arm elevation. Journal of Shoulder and Elbow Surgery, 24(11):1827-33. 

Ohl X, Lagac P-Y, Billuart F, Gagey O, Skalli W, Hagemeister N. (2015) Robustness and reproducibility of a glenoid-centered scapular coordinate system derived from low-dose stereoradiography analysis. Journal of Applied Biomechanics, 31(1):56-61. 

Phan P, Ouellet J, Mezghani N, de Guise J, Labelle H. (2015) A rule-based algorithm can output valid surgical strategies in the treatment of AIS. European Spine Journal, 24(7):1370-81. 

Ren Q, Baron L, Balazinski M, Botez R, Bigras P. (2015) Tool wear assessment based on type-2 fuzzy uncertainty estimation on acoustic emission. Applied Soft Computing Journal, 31:14-24. 

Salloum E, Bertrand-Grenier A, Lerouge S, Kauffman C, Héon H, Therasse E, Salazkin I, Roy Cardinal MH, Cloutier G, Soulez G. Endovascular repair of abdominal aortic aneurysm: Follow-up with noninvasive vascular elastography in a canine model, Radiology, 279 (2): 410-419, 2016

Savoji H, Lerouge S, Ajji A, Wertheimer MR. (2015) Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds. Plasma Process Polym, 12(4):314-27. 

Sins L, Tetreault P, Hagemeister N, Nuño N. (2015) Adaptation of the AnyBody Musculoskeletal Shoulder Model to the Nonconforming Total Shoulder Arthroplasty Context. Journal of Biomechanical Engineering, 137(10). 

Tang A, Rabasa-Lhoret R, Castel H, Wartelle-Bladou C, Gilbert G, Massicotte-Tisluck K, et al. (2015) Effects of insulin glargine and liraglutide therapy on liver fat as measured by magnetic resonance in patients with type 2 diabetes: a randomized trial. Diabetes Care, 38(7):1339-46. 

Tang A, Rabasa-Lhoret R, Castel H, Wartelle-Bladou C, Gilbert G, Massicotte-Tisluck K, et al. (2015) Response to Comment on Tang et al. Effects of Insulin Glargine and Liraglutide Therapy on Liver Fat as Measured by Magnetic Resonance in Patients With Type 2 Diabetes: A Randomized Trial. Diabetes Care 2015;38:1339–1346. Diabetes Care, 38(9):e150-e1. 

Tremblay J, Mac-Thiong J-M, Brailovski V, Petit Y. (2015) Braided tubular superelastic cables provide improved spinal stability compared to multifilament sublaminar cables. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229(9):645-51. 

Tremblay J, Mac-Thiong J-M, Brailovski V, Petit Y. (2015) Factors affecting intradiscal pressure measurement during in vitro biomechanical tests. Scoliosis, 10(Suppl 1):O19. 

Watson S, Nisol B, Lerouge S, Wertheimer MR. (2015) Energetics of molecular excitation, fragmentation, and polymerization in a dielectric barrier discharge with argon carrier gas. Langmuir, 31(37):10125-9. 

Zhang C, Skalli W, Lagacé P-Y, Billuart F, Ohl X, Cresson T, et al. (2015) Investigation of 3D glenohumeral displacements from 3D reconstruction using biplane X-ray images: Accuracy and reproducibility of the technique and preliminary analysis in rotator cuff tear patients. Journal of Electromyography and Kinesiology. (sous presse).

Zhao L, Joubair A, Bigras P, Bonev IA. (2015) Metrological evaluation of a novel medical robot and its kinematic calibration. International Journal of Advanced Robotic Systems, 12.

Labbé DR, Fuentes A, de Guise JA, Aissaoui R, Hagemeister N. (2016) Biomechanics and Biomaterials in Orthopedics. In: Poitout DG, editor. Three-dimensional biomechanical assessment of knee ligament ruptures. 2nd edition. London, UK: Springer-Verlag London. (sous presse).

Chénier F, Gagnon DH, Blouin M, Aissaoui R (2016). A Simplified Upper-Body Model to Improve the External Validity of Wheelchair Simulators. IEEE/ASME Transactions on Mechatronics. 2016/6. Vol. 21, no 3, 1641-1649.

Jung S, Martin T, Schmittbuhl M, Huck O (2016). The spectrum of orofacial manifestations in systemic sclerosis: a challenging management. 2016 May 19. doi: 10.1111/odi.12507.

Lequoy P, Savoji H,  Saoudi B, Bertrand-Grenier A, Wertheimer MR, De Crescenzo G, Soulez G, Lerouge S. In vitro and pilot in vivo evaluation of a bioactive coating for stent-grafts based on chondroitin sulfate and epidermal growth factor. Journal of Vascular and Interventional Radiology 2016, Vol. 27, Issue 5, p753–760.

Reimeringer M, Nuño N (2016). « The influence of contact ratio and its location on the primary stability of cementless total hip arthroplasty: A finite element analysis ». Journal of Biomechanics. Sous presse.

Bélanger P, Boivin G. (2016) Development of a low frequency omnidirectional piezoelectric shear horizontal wave transducer. Smart Materials and Structures, 25(4).
 
Bianco R-J, Aubin C-É, Mac-Thiong J-M, Wagnac E, Arnoux P-J. (2016) Pedicle screw fixation under nonaxial loads: a cadaveric study. Spine, 41(3):E124-E30.
 
Lequoy P, Murschel F, Liberelle B, Lerouge S, De Crescenzo G. (2016) Controlled co-immobilization of EGF and VEGF to optimize vascular cell survival. Acta Biomateralia, 29:239-47. 

Monette A, Ceccaldi C, Assaad E, Lerouge S, Lapointe R. (2016) Chitosan thermogels for local expansion and delivery of tumor-specific T lymphocytes towards enhanced cancer immunotherapies. Biomaterials, 75:237-49. 

Lungu E, Thibault-Lemyre A,  Dominguez JM, Trudel D,  Bureau NJ (2015). A case of recurrent leg necrotic ulcers secondary to silicone migration in a transgender patient: radiographic, ultrasound and MRI findings. 2016 The Authors. Published by the British Institute of Radiology
DOI: http://dx.doi.org/10.1259/bjrcr.20150309. October 28, 2015.

Morin SN, Wall M, Brown J, de Guise JA, Godbout B, Michou L,  Ste-Marie LG, Belzile E, Rahme E, Moser T (2016). Assessment of Femur Geometrical Parameters using EOS™ imaging technology in Patients with Atypical Femur Fractures. Bone. 2015 Nov 2;83:184-189. doi: 10.1016/j.bone.2015.10.016.

Nisol B, Gagnon H, Lerouge S, Wertheimer MR. (2016). Energy of reactions in atmospheric-pressure plasma polymerization with inert carrier gas. Plasma Process Polym, 13(3):366-74. 

Nisol B, Watson S, Lerouge S et Wertheimer MR (2016). « Energetics of reactions in a dielectric barrier discharge with argon carrier gas: II mixtures with different molecules ». Plasma Processes and Polymers, vol. 13, no 5, p. 557-564.

Quevedo Gonzalez FJ, Nuño N. (2016) Finite element modelling approaches for well-ordered porous metallic materials for orthopaedic applications: cost effectiveness and geometrical considerations. Computer Methods in Biomechanics and Biomedical Engineering, 19(8):845-54. 

Rivard J, Brailovski V, Ferlatte A, Petit Y, Mac-Thiong JM. (2016) New methodology for comparative evaluation of the abrasive properties of orthopedic cables, cut-out reciprocal testing (CORT). Experimental techniques. (sous presse).

Roy D, Lerouge S, Inaekyan K, Kauffmann C, Mongrain R, Soulez G. Experimental validation of more realistic computer models for stent-graft repair of abdominal aortic aneurysms, including pre-load assessment. Int J Numer Method Biomed Eng. 2016 Jan 8. doi: 10.1002/cnm.2769. [Epub ahead of print] PMID:    26748474

Vanderesse N, Ky I, Quevedo Gonzalez F, Nuño N, Bocher P. (2016) Image analysis characterization of periodic porous materials produced by additive manufacturing. Materials & Design, 92:767-78.
 




Records

Published articles:


Conference reports:


Conference abstracts: