Publications


Publications - machine dynamics
 
Journals
2014

Bouzidane A. and Thomas M., Jan 2014. Linear and Nonlinear Behavior Analysis of a Flexible Shaft Supported by hydrostatic Squeeze Film Dampers, Int. J. of Engineering Research and Applications (IJERA), Vol. 4, Issue 1 (V.2), 311-316

Lamraoui M., Thomas M., El Badaoui M. and Girardin F., 20 February 2014. Indicators for monitoring chatter in milling based on instantaneous angular speeds. Mechanical Systems and Signal Processing, 44 (1-2), 72-85

Rafieian F., Girardin F., Liu Z., Thomas M. & Hazel B., 20 February 2014. Angular analysis of the cyclic impacting oscillations in a robotic grinding process, MSSP, Elsevier. 44 (1-2), 160-176

Lessard, J., Bigras, P., Liu, Z., Hazel, B., 2014 “Characterization, Modeling and Vibration Control of a Flexible Joint for a Robotic System”, Journal of Vibration and Control. Version en ligne disponible sur le site de la revue, 20(6),  943-960

Najjari M., Guilbault R., 2014, Edge contact effect on thermal elastohydrodynamic lubrication of finite contact, Tribology International, 71, pp.50

2013

Feng Z., Champliaud H., Sabourin M., Morin S. (2013).Optimal Blank Design Based on Finite Element Method for Blades of Large Francis Turbines, Simulation Modelling Practice and Theory, vol. 36, August 2013, p. 11–21 (CRSNG).

Thuot D., Liu Z., Champliaud H., Beaudry J., Richard P-L., Blain M. (2013). Remote Robotic Underwater Grinding System and Modeling for Rectification of Hydroelectric Structures, Robotics and Computer Integrated Manufacturing, vol. 29, February 2013, p. 85-99 (CRSNG).

Kassab R., Champliaud H., Lê V.N., Lanteigne J., Thomas M. (2012). Experimental and Finite Element Analysis of a T-Joint Welding, Journal of Mechanics Engineering and Automation, vol. 2, July 2012, p. 411-421 (CRSNG).

Rafieian F., Girardin F., Liu Z., Thomas M. & Hazel B, 2013"Angular analysis of the cyclic impacting oscillations in a robotic grinding process", Mechanical Systems and Signal Processing, Elsevier, 35 p.

Lamraoui M., Thomas M. and ElBadaoui M, 2013,"Chatter detection in milling machines by neural networks classification and feature selection,", Journal of Vibration and Control, Sage, P16

Adewusi, S. Rakheja, P. Marcotte and M. Thomas, 2013, "Distributed vibration power absorption of the human hand-arm system in different postures coupled with vibrating handle and power tools", Journal of Industrial Ergonomics, Elsevier, 43(4), 363-374

Lamraoui M., Thomas M. and ElBadaoui M, 2013 "Cyclostationarity Approach for Monitoring Chatter and Tool Wear in High speed Milling", Mechanical Systems and Signal Processing, 30 p.

Batista L., B. Badri , R. Sabourin and M. Thomas, 2013, "A Classifier Fusion System for Bearing Fault Diagnosis", Expert Systems with Applications, Elsevier, 40(17), 6788-6797

Kidar T., Thomas M., Guilbault R. & El Badaoui M.,2013, "Comparison between the sensitivity of LMD and EMD algorithms for early detection of gear defects", Mechanics & Industry Cambridge University Press, 14(2), 121-127

Lamraoui M., Thomas M., ElBadaoui M. and Girardin F, 2013, "Indicators for monitoring chatter in milling based on instantaneous angular speeds", Mechanical Systems and Signal Processing, 16 p.

Bouzidane A. and Thomas M, 2013, "Nonlinear Dynamic Analysis of a Rigid Rotor Supported by a Three-Pad Hydrostatic Squeeze Film Dampers", Tribology transactions, Taylor & Francis group http:// dx.doi.org/10.1080/10402004.2013.788238, 44 p.

V.H. Vu; M. Thomas; F. Lafleur and L. Marcouiller, 2013, "Towards an automatic spectral and modal identification from operational modal analysis.", Journal of Sound and Vibration, 332, 213-227

2012

R. K. Kassab, H. Champliaud, N. V. Lê, J. Lanteigne and M. Thomas, 2012, "Experimental and Finite Element Analysis of a T-Joint Welding", Journal of Mechanics Engineering and Automation, 2(7), 411-421

Corriveau G., Guilbault R., Tahan A., Sabourin R., 2012, “Review and Study of Genotypic Diversity Measures for Real-Coded Representations” IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION, Accepted September 14, 2011

Guilbault R., Lalonde S. and Thomas M., 2012. Non-linear damping calculation in cylindrical gear dynamic modeling, Journal of Sound and Vibration, Vol. 331(9), pp. 2110-2118

Lessard, J., Bigras, P., Liu, Z., Hazel, B., 2012 “Characterization, Modeling and Vibration Control of a Flexible Joint for a Robotic System”, Journal of Vibration and Control. Online version is available on the Journal site, DOI: 10.1177/1077546312466884

Thuot, D., Liu, Z., Champliaud, H., Beaudry, J., Richard, P.-L., Blain, M., 2012, “Remote robotic underwater grinding system and modeling for rectification of hydroelectric structures”, Robotics and Computer-Integrated Manufacturing, 29 (1), 2013, pp.86-95.

Bouzidane A. and Thomas M, 2012, "Nonlinear Dynamic Analysis of a Flexible Shaft Supported by Smart Hydrostatic Squeeze Film Dampers", ASME-Journal of tribology, 135(3), 9 p.

Badri B., Thomas M. and Sassi S, 2012, "The envelop Shock detector: a new method to detect impulsive signals", International journal of COMADEM, 16 p.

Guilbault R., Lalonde S. and Thomas M, 2012, "Non-linear damping calculation in cylindrical gear dynamic modeling", Journal of Sound and Vibration, 331(9), 2110-2128

2011

Guilbault, R.
, 2011, “A Fast Correction for Elastic Quarter-Space Applied to 3D Modeling of Edge Contact Problems,” Journal of tribology by ASME. Vol,133., pp. 031402-o31402-10

Lalonde, S. and Guilbault, R. Prediction of Thin-rimmed Gear Crack Propagation from a Factorial Design Approach. Fatigue and Fracture of Engineering Materials and Structures. Volume 34, Issue 5, pp. 470-486.

Corriveau, G.; Guilbault, R.; Tahan, A. and Sabourin, R., Review and Study of Genotypic Diversity Measures for Real-Coded Representations, TEVC-00255-2010 - Accepted for publication (final version) Manuscript received July 19, 2010; revised November 16, 2010, May 5, 2011 and September 5, 2011.

Lajmi A., Champliaud H., Lê V.N. 2011, Computation of the Maximum Torque of a Cap Liner Using a Power-Law Friction and Finite Element Analysis. Packaging Technology and Science, vol. 24, pp. 103-121.

Badri B., Thomas M. and Sassi S., 2011. A shock filter for bearing slipping detection and multiple damage diagnosis, International Journal of Mechanics, Vol 5 (4), 318-326. (financement CRSNG)

Vu V.H., M. Thomas, A.A. Lakis and L. Marcouiller, 2011, Operational modal analysis by updating autoregressive model. Mechanical Systems and Signal Processing, doi :10.1016/j.mssp.2010.08.014, 25, 1028-1044 (financement CRSNG-RDC).

Sun Y. and Thomas M., July 2011, Control of torsional rotor vibrations using an electrorheological fluid dynamic absorber, Journal of Vibration and Control. Sage publications, DOI: 10.1177/1077546310359759. Vol. 17 (8), 1253-1264 (financement CRSNG)

2010     
Hulskamp A.W., van Wingerden, J-W., Barlas T., Champliaud H., van Kuik G.A.M., Bersee H.E.N., Verhaegen M. (2010). Dynamic Load Mitigation Experiments on a Scale Model of a Wind Turbine with a Smart Rotor, Wind Energy, published on line.

Lajmi A., Champliaud H., Lê N.V. (2010). Pressure and Temperature Dependent Static Friction Model for an Elastomer Cap Liner Based on Experiments, Fifth International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2010), December 18-20, Hammamet, Tunisia.

Lê N.V., Champliaud H. (2010). Finite Element Simulation of Forces in Strips Tying Metal Sheet Coils, The 30th IASTED Conference on Modelling, Identification, and Control ~AsiaMIC 2010~ November 24 – 26, 2010, Phuket, Thailand.

Badri B., M. Thomas; S. Sassi; I. Zaghbani; V. Songméné, 2010, Étude du comportement des roulements dans les rotors tournant à haute vitesse, Revue Internationale sur l’Ingénierie des risques Industriels (JI-IRI), Vol 3, No 1, pp. 1-16. (financement CRIAQ-CRSNG-RDC)

Vu V.H., M. Thomas, A.A. Lakis and L. Marcouiller, 2010, On line Time-Modal monitoring of Non stationnary systems, Revue Internationale sur l’Ingénierie des risques Industriels (JI-IRI), Vol 3, No 1, pp. 45-65 (financement CRSNG-RDC).

2009     
Rhéaume F.-É., Champliaud H., Liu Z. (2009). Understanding and Modeling the torsional stiffness of harmonic drives through finite element method, Journal of Mechanical Engineering Science, 223(2), 515-524.

Feng Z., Champliaud H., Dao T.M. (2009). Numerical Studying of Non-Kinematical Conical Bending with Cylindrical Rolls. Journal of Simulation Modelling Practice and Theory, Vol. 17(10), page 1710-1722.  

Simoneau, D. Thibault and J.-L. Fihey, “A comparison of residual stresses in hammer-peened, multi-pass welds – A514 (S690Q) and S41500,” Welding in the World, vol. 53, No 5/6, pp. R1-R15, (2009).

2008     
Montminy S., Dupuis E., Champliaud H. (2008). Mechanical Design of a Hopper Robot for Planetary Exploration using SMA as a Unique Source of Power, Acta Astronautica, 62, pp. 438-452.

Nguyen H.N., Lê V.N ., Champliaud H., Martin F. (2008). Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements, High Performance Structures and Materials IV, WIT Transactions on Built Environment, Vol. 97, pp. 459-469.

Hacini L., V. N. Lê., Bocher P. (2008) “Effect of impact energy on residual stresses induced by hammer peening of 304L plates” Journal of Materials Processing Technology, vol. 208, Issues 1-3, pp. 542-548

Hacini L., V. N. Lê., Bocher P. (2008) “Experimental analysis of hammer peening effects on 304L: The effect of impact energy,” Journal of Materials Processing Technology. Volume 208, Issues 1-3, 21 November 2008, Pages 542-548 [NSERC + IREQ].

Roy S. and Z. Liu, 2008, “Road Vehicle Suspension and Performance Evaluation using a Two Dimensional Vehicle Mode,” Int. J. of Vehicle Systems Modeling and Testing, 3(1/2), 68-93, 2008.

Bouzidane A., Thomas M. and Lakis A.,  Oct 2008, Non linear dynamic behaviour of a rigid rotor supported by hydrostatic squeeze film dampers, Journal of Tribology, Transactions of the ASME, Vol. 130 (4), pp. 041102-1/041102-9.

2007     
Liu Z., 2007,  “Characterization of Optimal Human Driver Model and Stability of a Tractor-Semitrailer Vehicle System with Time Delay,” Mechanical Systems and Signal Processing, 21(5), 2007, 2080-2098.    

Liu Z. and G. Payre, 2007, “Global Bifurcation Analysis of a Nonlinear Road Vehicle System,” ASME Journal of Computational and Nonlinear Dynamics, October, 2(4), 308-315.

2006     
Guilbault, R., 2006, Tooth Influence on Flexural and Torsional Flexibility, and Model Tooth Number Prediction for Optimum Dynamic Simulation of Wide-Faced Spur Gears. ASME Journal of Mechanical Design, vol. 128, pp. 626-633.

Guilbault, R., Gosselin, C., Cloutier, L., 2006, Helical Gears, Effects of Tooth Deviations and Tooth Modifications on Load Sharing and Fillet Stresses. ASME Journal of Mechanical Design, vol. 128, pp. 444-456.
   
Lacroix B., P. Seers and Z. Liu, 2006,  “Design of a Passive Nonlinear Damping for a Road Race Car Application,” SAE Paper (Society of Automotive Engineers), Paper No. 2006-01-1984.
 
Sassi S., Badri B. and Thomas M., 2006, TALAF” and “THIKAT” as innovative time domain indicators for tracking Ball bearings. Proceedings of the 24th Seminar on machinery vibration, paper A19- Canadian Machinery Vibration Association, ISBN 2-921145-61-8, Montreal, pp. 404-419.

2005     
Terrier P., Seers P., Champliaud H. (2005). Comparison of Emissions and Fuel Consumption between Octane and E85 in a Simulated Hybrid Electric Vehicle, Transactions SAE (no. 2005-01-3829).

Guilbault, R., Gosselin, C., Cloutier, L., 2005, Express Model for Load Sharing and Stress Analysis in Helical Gear. ASME Journal of Mechanical Design, vol. 127, pp. 1161-1172.
Proceedings
2014

A. Bouzidane, F Ghezali and M. Thomas, avril 2014, Performance Characteristics of an Orifice Compensated Three-Pad Hydrostatic Squeeze Film Dampers, ACMA, Marrakech, 8 p.

F. Ghezali, A. Bouzidane and M. Thomas, avril 2014. Influence of Flow Regime in a Recess on the Pressure Field of an Orifice Compensated Hydrostatic Bearing, ACMA, Marrakech, 8 p.

Kidar T., M. Thomas, M. Elbadaoui and R. Guilbault, 2014, Phase monitoring by ESPRIT with sliding window and Hilbert Transform for early detection of gear cracks, Adv. Monitoring of Machinery in Nonstationary Operation, 287-299

2013

Tahvilian, M., Champliaud, H., Liu, Z., Hazel, B. (2013), “Chop formation analysis of single grit cutting action in robotic grinding processes”, COM2013 – Conference of Metallurgists, MS&T13 – Advanced in Hydroelectric Turbine Manufacturing and Repair, Montreal, Canada, October 27-31.

Santos, T, Liu, Z., Hazel, B. (2013), “Étude des propriétés vibratoires d’un système robotique en opération de meulage par modélisation multi-corps flexibles”, Congrès Français de Mécanique 2013 (CFM2013), Bordeaux, France, 26-30 août 2012.

Tahvilian, M., Liu, Z., Champliaud, H., Hazel, B. (2013), “Influence of grit shape and cutting edge of materail removal mechanism of a single abrasive in flexible robotic grinding”, ASME 2013 Int. Mech. Eng. Congress & Exposition (IMECE2013), San Diego, USA, Nov. 13-21, 2013.

Agnard, S., Liu, Z., Hazel, B. (2013), “Modeling and experimental work on robotic grinding tool profiling through tool orientation control for repair of high curvature surfaces”, COM2013 – Conference of Metallurgists, MS&T13 – Advanced in Hydroelectric Turbine Manufacturing and Repair, Montreal, Canada, October 27-31.

A. BOUZIDANE AND M. THOMAS, 2013, Nonlinear Behavior Analysis of a Flexible Shaft Supported by hydrostatic Squeeze Film Dampers, 21ème Congrès Français de Mécanique,Bordeaux, 26 au 30 août 2013, Full Text

V. H. Vu and M. Thomas, 2013, Uncertainties on Modal Parameters by Operational Modal Analysis, 21ème Congrès Français de Mécanique,Bordeaux, 26 au 30 août 2013, Full Text

Adewusi S., Thomas M, Vu V.H. and Li W. 2013, MODAL PARAMETERS OF THE HUMAN HAND-ARM USING FINITE ELEMENT AND OPERATIONAL MODAL ANALYSIS, 3ième Congrès International sur l’Ingénierie des Risques Industriels,Reims, 3-5Juillet 2013, Full Text

M. Kedadouche, M. Thomas and A. Tahan, 2013,CYCLOSTATIONARITY APPLIED TO ACOUSTIC EMISSION AND DEVELOPMENT OF A NEW INDICATOR FOR MONITORING BEARING DEFECTS,3ième Congrès International sur l’Ingénierie des Risques Industriels,Reims, 3-5Juillet 2013, Full Text

T.KIDAR, M. THOMAS, M.BADAOUI, R. GUILBAULT, 2013, CONTROL OF PHASES BY ESPRIT AND WLSE METHODS FOR THE EARLY DETECTION OF GEAR CRACKS, 3ième Congrès International sur l’Ingénierie des Risques Industriels,Reims, 3-5Juillet 2013, Full Text

T. Kidar, M. Thomas, M. Elbadaoui and R. Guilbault, "Phase monitoring by ESPRIT with sliding window and Hilbert Transform for early detection of gear cracks" Papier , 11p. 3rd Intemational Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013), Italie, Ferrara, 2013-05-08

M. Kedadouche, M. Thomas et A. Tahan, "Empirical Mode Decomposition of Acoustic Emission for Early Detection of Bearing Defects." Papier , 11 p. 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013), Italie, Ferrara, 2013-05-09

Imaouchen Y., R. Alkama and M. Thomas, "Application of Wavelet Packet Transform for outer race bearing defect detection" Papier The 3rd International Conference on Image and Signal Processing and their Applications (ISPA12),, Algérie, Mostaganem, 2012-12-03

2012

Lessard, J., Bigras, P., Liu, Z., Hazel, B. 2012, “Vibration Control and Experimental Investigation of a Robotic System with Flexible joints”, The 6th Asian Conference on Multibody Dynamics, Shanghai, Chine, August 26-30, 2012.

A. M. Kedadouche, M. Thomas et A. Tahan, 2012, SURVEILLANCE DES ROULEMENTS PAR EMISSION ACOUSTIQUE: ETUDE COMPARATIVE AVEC LES TECHNIQUES VIBRATOIRES POUR UNE DETECTION PRECOCE, Séminaire ACVM en Analyse des Vibrations, Fiabilité et Maintenance,October 24-26 2012, Niagara Falls, Full Text

Kidar T., Thomas M., El Badaoui M., Guilbault R. March 2012. Application of time descriptors to the modified Hilbert transform of empirical mode decomposition for early detection of gear defects. Proceedings of the 2nd conference on Condition Monitoring of Machinery in Non Stationnary Operations, Hammamet, Tunisia, paper 28. pp 471-480.

Badri B., Thomas M., Sassi S. March 2012. Variable drive frequency effect on spindle dynamic behavior in high speed machining. Proceedings of the 2nd conference on Condition Monitoring of Machinery in Non Stationnary Operations, Hammamet, Tunisia, paper 91. pp 547-554

Bouzidane A. and Thomas M. March 2012. Non linear Transient Response of a Flexible Shaft Controlled by Electro-Rheological Hydrostatic Squeeze Film Dampers Proceedings of the 2nd conference on Condition Monitoring of Machinery in Non Stationnary Operations, Hammamet, Tunisia, paper 94. pp 33-40.

Sun Y. and Thomas M., Jan 2012. A smart Electrorheological Dynamic Absorber for Controlling Torsional Vibrations of Rotors. Proceedings of 12th Pan-American Congress of Applied Mechanics, Trinidad, paper 296, 6 p (selected as Keynote paper).

Imaouchen Y., R. Alkama and M. Thomas, "Application of Wavelet Packet Transform for outer race bearing defect detection" Papier The 3rd International Conference on Image and Signal Processing and their Applications (ISPA12),, Algérie, Mostaganem, 2012-12-03

M. Lamraoui, M. Barakat, M. Thomas, M. El Badaoui, V. Songméné, "Envelope Multiband Resonance Filtering and Neural Networks for the Chatter Detection in High Speed Milling Machines" Résumé , 4p. International Symposium on research and innovation for transport systems of the future (RITF 2012), France, Paris, 2012-11-15

Kidar T., M. Thomas, R. Guilbault et M. El Badaoui, "Comparison between the sensitivity of LMD and EMD algorithms for early detection of gear defects" Papier, 8 p.
Analyse Vibratoire Expérimentale, France, Blois, 2012-11-20

Imaouchen Y., M. Thomas et R. Alkama, "Détection de défauts de roulements en combinant de l’Enveloppe de Hilbert au Kurtogram" Papier , 6 p. 2e Conférence Internationale sur la Maintenance, la Gestion, la Logistique et l’Electrotechnique, Algérie, Oran, 2012-11-22

Imaouchen Y., R. Alkama and M. Thomas, "Wavelet Packet Transform of Induction Motor Stator Current for Bearing Fault Detection" Papier , 5 p. International Conference on Electromechanical Engineering (ICEE),, Algérie, Skidda ( constantine), 2012-11-21

M. Kedadouche, M. Thomas and A. Tahan, "Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection" Papier , CMVA, 17 p.
30th seminar on machinery vibration, CMVA, Canada, Ontario, Niagara Falls, 2012-10-25

M. Lamraoui, M. Thomas, M. El Badaoui, F. Girardin, "Cyclostationarity analysis of instantaneous angular speeds for monitoring chatter in high speed milling" Papier , IEEE, 3868-3873 38th IEEE- IECON 2012, Canada, Québec, Montréal, 2012-10-26

L. Batista, B. Badri, R. Sabourin, M. Thomas, "Detecting Bearing Defects under High Noise Levels: A Classifier Fusion Approach" Papier , IEEE, 3880-3886 38th Conf. IEEE- IECON 2012, Canada, Québec, Montréal, 2012-10-26

Vu V.H., Thomas M. and Lafleur F, "Harmonic and modal frequency discrimination by operational modal analysis" Papier , VCB, 9 p. 18th symposium on Vibrations, Shocks and Noise, France, St Ouen, 2012-07-04

Adewusi S., Thomas M. and Vu V.H, "Natural frequencies of the hand-arm system using finite element method." Papier , 4 p. Proceedings of the 4th American conference on Human Vibration, , Harfford, 2012-06-14

Badri B., Thomas M., Sassi S, "Variable drive frequency effect on spindle dynamic behavior in high speed machining." Papier , Springer, 547-554 2nd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO, Tunisie, Hammamet, 2012-03-26

Bouzidane A. and Thomas M, "Non linear Transient Response of a Flexible Shaft Controlled by Electro-Rheological Hydrostatic Squeeze Film Dampers" Papier , Springer, 33-40 2nd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO, Tunisie, Hammamet, 2012-03-27

Kidar T., Thomas M., El Badaoui M., Guilbault R, "Application of time descriptors to the modified Hilbert transform of empirical mode decomposition for early detection of gear defects" Papier , Springer, 471-480 2e International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO 2012), Tunisie, Hammamet, 2012-03-27

2011

Girardin F., Rafieian F., Liu Z., Thomas M. and Hazel B., Oct. 2011. Using angular speed measurement with Hall effect sensors to observe grinding operation with flexible robot. Proceedings of Surveillance6, Compiègne, paper 7. 7p.

Lamraoui M.,  M. Thomas,  M. El Badaoui,  I. Zaghbani and  V. Songméné, March 2011, The angular Kurtosis and power: new features for machining monitoring, Proceedings of the XIV International Symposium on Dynamic Problems of Mechanics (DINAME 2011),ISSN 2179-9601, Fleury, A. T., Kurka, P. R. G. (Editors), ABCM, São Sebastião, Brazil, pp. 494-511.

Vu V.H., Thomas M. and Lafleur F. Oct 2011. Operational Modal Monitoring of High Power Hydro-electrical Generators. Proceedings of Surveillance6, Compiègne, paper 5. 12 p.

Bouzidane A., Thomas M., and Ghezali F. Oct 2011. Dynamic Behavior of a Rigid Rotor Supported by a New Three-Pad Hydrostatic Squeeze Film Damper. Proceedings of Surveillance6, Compiègne, paper 13- 20 p.

Lafleur F., Vu V.H. and Thomas M, Oct 2011. Case study of operational modal analysis of a large hydroelectric generator, Proceedings of the 29th Seminar on machinery vibration, Canadian Machinery Vibration Association, St John (NB, Canada), 11 pages. Full text

Badri B., Thomas M. and Sassi S. July 2011. A shock filter of a vibratory signal for damage detection. Computational Engineering in Systems Applications, ISBN 978-1-61804-014-5, Vol 2, pp 13-17.

Vu V.H., Thomas M. and Lafleur F., May 2011, Operational Modal Monitoring of High Power Hydro-electrical Generators, Proceedings of IOMAC, Istanbul, paper 410. 8 p. (financement MITACS)

Mokdad F., Vu V.H., Thomas M., Rafieian F., Liu Z. and Hazel B., May 2011, Online modal analysis of a flexible robot during grinding, Proceedings of IOMAC, Istanbul, paper 409. 10 p.

Lamraoui M., M. Thomas , M. El Badaoui , I. Zaghbani and V. Songméné, March 2011, The angular Kurtosis and power: new features for machining monitoring, Proceedings of the XIV International Symposium on Dynamic Problems of Mechanics (DINAME 2011), ISSN 2179-9601, Fleury, A. T., Kurka, P. R. G. (Editors), ABCM, São Sebastião, Brazil, pp. 494-511.

2010    

Savaria V., Jie J., Hoseini M., Bridier F., Bocher P., (2010), “On the measurement of residual stress gradients in induction hardened parts”, 8th European Conference on Residual Stresses, Riva del Garda, Italy.

Candeo A., Bocher P., Dughiero F., (2010) “Multiphysics modeling of induction hardening of ring gears”, International Symposium on Heating by Electromagnetic Sources Induction, Conduction, Dielectric and Microwaves & Electromagnetic Processing, (May 18-21), 2010 Padua, Italy.

Candeo A., Ducassy C., Bocher P., Dughiero F., (2010) “Multiphysics modeling of induction hardening of ring gears for the aerospace industry”, 14th Biennial IEEE Conference on Electromagnetic Field Computation, Chicago, USA.

Saboori M., Champliaud H., Gholipour J., Gakwaya A., Savoie J., Wanjara P. (2010). Effect of Material Model on Finite Element Modeling of Aerospace Alloys, International Conference on Advances in Materials and Processing Technologies 2010 (AMPT2010), October 24-27, Paris, France.

Kassab R, Champliaud H., Lê V.N., Thomas M. and Lanteigne J., Juin 2010, Finite element modeling of a welded T-joint, Proceedings of the CSME forum, Victoria, BC, Canada, 5p.

J. Chen and Z. Liu, "Modeling and Parameter Identification of a Tractor Semitrailer/Driver Closed-loop System Using the Simulated Annealing (SA) Optimization Approach”, 2010 IEEE Int. Conf. on Information and Automation, Harbin, China, June 20-23, 2010.


G. Swiatek, Z. Liu and B. Hazel, "Dynamic simulation and configuration dependant modal identification of a portable flexible-link and flexible-joint robot", 2010 CMVA Seminar, October 27-29, 2010, Université Laval, Québec, Canada (Award of Excellence - Best Article by a Student).  Full text
 
J. Chen and Z. Liu, "Modeling and Parameter Identification of a Tractor Semitrailer/Driver Closed-loop System Using the Simulated Annealing (SA) Optimization Approach", 2010 IEEE Int. Conf. on Information and Automation, Harbin, China, June 20-23, 2010.

Kassab R, Champliaud H., Le V.N., Thomas M. and Lanteigne J., June 2010, Finite element modeling of a welded T-joint, Proceedings of the CSME forum, Victoria, BC, Canada, 5p.

2009     
Lê V.N., Champliaud H., Martin F., Amri B. (2009), Rotating Bending Stresses in Shrink-fit Assemblies Using FEM, NAFEMS World Congress 2009, Crete, Greece, June 16-19.

F. Rafieian, Z. Liu and B. Hazel, "Dynamic Model and Modal Testing for Vibration Analysis of Robotic Grinding Process with a 6 DOF Flexible-Joint Manipulator", IEEE Int. Conference on Mechatronics and Automation, IEEE ICMA 2009, Changchun, China, Aug. 9-12, 2009.
   
Badri B.; M. Thomas; S. Sassi; I. Zaghbani; V. Songméné; A.A. Lakis; N. Mureithi, Mai 2009. Étude du comportement des roulements dans les rotors tournant à haute vitesse. (A Study of Bearing Behaviour in Rotors Rotating at Very High Speeds) CIRI, Reims, paper CIRI013, 15 pages.   
      
2008     
Simoneau, R., D. Thibault, J.-L. Fihey, "A Comparison of Residual Stress in Hammer Peened, Multipass Steel Welds – A514 (S690Q) and S41500", Document IX-L-1020-08, 61st Annual Assembly of the International Welding Institute, Graz, (2008).

2007     
Dao T.M., Ateme-Nguema B. (2007). Optimal Selection of Manufacturing Routing of Parts: A Case Study, International Conference on Industry, Engineering, and Management Systems, Cocoa Beach, Florida, March 12-14.
   
Nguyen H.N., Lê N.V. (2007). Using 2-D axisymmetric finite elements for fatigue analysis of shrinkfit hub and shaft assemblies, Proceedings of the 8th National Conference on Mechanics, Dec. 6-9, Hanoi, Vietnam.

Nguyen H.N., Lê V.N., Champliaud H., Martin F. (2007). Stress Concentration Factor in Shrink-fit Shaft based on 3-D Finite Elements, Proc. of the 8th National Mechanical Conference, Hanoi, Vietnam, December 6-9.

Martin F., Lê V.N., Champliaud H., Nguyen H.N. (2007). Stress Concentration of Shrink Fit Assembly using Finite Element Method, The IASTED Asian Conference on Modelling and Simulation, Asia MS 2007, Beijing, China, October 8-10.

J. Li, Z. Liu, M. Thomas and J.-L. Fihey, "Dynamic Analysis of Manipulators with Flexible Joints and Flexible Links", Fifth International Conference on Industrial Automation, Montreal, Québec, Canada, June 11-13, 2007.

Komgom N.C., Mureithi N., Lakis A. a. and Thomas M., December 2007, On the use of time synchronous averaging independent component analysis and support vector machines for bearing fault diagnosis, Proc. 1st Int. Conf. on Ind. Risk Engineering, Montreal, ISBN 978-2-921145-65-7, 610-624.

Komgom N.C., Mureithi N., Lakis A. and Thomas M., October 2007, Bearing fault detection using pattern recognition methods applied to the Case Western Reserve University bearing data, Proc. of the 25th Seminar on machinery vibration, CMVA 07, Saint John, NB, 40.1-40.15.  Full text.
 
Badri B., Thomas M., Archambault R., Sassi S. and Lakis A., June 2007, Rapid Julien Transform: A New Method for Shock Detection and Time-Domain Classification, Proceedings of the 20th International conference of Comadem07, Faro, Portugal, pp. 667- 676.

Badri B., Thomas M., Sassi S. and Lakis A., June 2007, Combination of bearing defect simulator and artificial neural network for the diagnosis of damaged bearings, Proceedings of the 20th international conference of Comadem07, Faro, Portugal, pp. 175- 185.

Safizadeh S., Lakis A. and Thomas M., June 2007, Machinery Diagnosis by Wavelet Analysis, Proceedings of the 20th international conference of Comadem07, Faro, Portugal, pp. 417-424.
 
2006     
Dupuis E., Montminy S., Farhat M., Champliaud H. (2006). Mechanical Design of a Hopper Robot for Planetary Exploration, 9th ESA Workshop on Advanced Space Technologies for Robotics and Automation, Noordwijk, The Netherlands, November 28-29.

Montminy S., Dupuis E., Champliaud H. (2006). Mechanical Design of a Hopper Robot for Planetary Exploration using SMA as a Unique Source of Power, 57th International Astronautical Congress 2006, Valencia, Spain, October 2-6.

Boisvert J., Champliaud H., Bellizzi T., Seers P. (2006). Simulation and Optimisation of a Reconfigurable Discrete Die for the Hot Forming of Thick Steel Plates in Hydro Power Industry, 2006 Ansys Conference and Exhibition, Pittsburgh, USA, May 2-4.
   
Lalonde, S., Guilbault, R., 2006, Dynamic Analysis of Spur Gears by Non Linear Modeling. Proceeding of the 24th Machinery Vibration Seminar: "From Theory to Reality", Montreal, Canada.

F.-É. Rhéaume, H. Champliaud and Z. Liu, "Simulating Strain wave Gearing Torsinal Stiffness using the Finite Element Method", 2006 Ansys Conference and Exhibition, Pittsburgh, PA, USA.

B. Lacroix, P. Seers and Z. Liu, "Race Car Suspension Design with a Nonlinear Damping", 2006 CMVA Seminar, October 23-26, 2006, Montreal, Canada.
 
S. Roy and Z. Liu, "Modeling and Simulation of a Parametric vehicle for Suspension and Performance Analysis", 2006 CMVA Seminar, October 23-26, 2006, Montreal, Canada (Award of Excellence - Best Article by a Student).

Badri B., Thomas M. and Sassi S., 2006. Étude et développement d'un système expert basé sur les réseaux de neurones pour le diagnostic des défauts de roulements (Study and development of an expert system based on network neurons for bearing defects detection). Proceedings of the 24th Seminar on machinery vibration, Paper B1, CMVA, ISBN 2-921145-61-8, Montreal, pp. 386-403.

Masson, P., Micheau, P., Pasco, Y., Thomas, M., Brailovski, V., Meunier, M., Peter, Y.-A., Song, I.-H., Mateescu, D., Misra, A., Mrad, N., Pinsonnault, J., Cambron, A., 2006. "Smart technologies for structural health monitoring of aerospace structures", CanSmart Workshop, Toronto, ON, 12p.

2005     
Potvin M.J., Sylvestre B., Champliaud H. (2005). Development of a Small Deployable Membrane Antenna, Canadian Aeronautics and Space Institute 2005 Conference, Toronto, Canada, April 27-28l.

Fihey, J.-L., R. Simoneau, J. Lanteigne, D. Thibault, Y. Laroche, "Controlled Hammer-Peening on a restrained A514 (S690Q) Weldment", Conference on High Strength Steels for Hydropower Plants, Graz, July 5-6, (2005).

Guilbault, R ., Cloutier, L., 2005, Numerical Investigation of the Influence of Rim and Web Thickness on Vibration Modes of Thin-Rimmed Cylindrical Gears. International Conference on Gears, Munich, Germany, pp. 651-669.

Guilbault, R., 2005, Modes vibratoires des roues d'engrenage cylindriques : un outil de conception adapté (Cylindrical Gear Wheel Vibration Modes: A Tailored Design Tool). CMVA Conference, Montreal, Canada, October.

Badri, B., Thomas, M., Archambault, R. and Sassi, S., October 2005. «  La transformée de Julien : une nouvelle procédure de traitement de signal pour la détection des chocs » (The Julien Transform: A New Signal Processing Tool for Shock Detection). Proceedings of the 23rd Seminar on machinery vibration, Canadian Machinery Vibration Association, Edmonton, AB, 10 pages.
Dissertations and theses
Theses
Year Author Title Supervisor/Co-supervisor
2007 A. Bouzidane Conception d'un palier hydrostatique intelligent pour contrôler les vibrations de rotors (Design of an Intelligent Hydrostatic Bearing for Controlling Rotor Vibration)  M. Thomas

Dissertations
Year Author Title Supervisor/Co-supervisor
2008 B. Hingray Étude expérimentale du comportement dynamique des engrenages cylindriques (An Experimental Study of the Dynamic Behaviour of Helical Gears) G. Raynald
M. Thomas
2008 R.K. Kassb Modélisation par la méthode des éléments finis des distorsion dues au soudage d'un joint en T (Finite Element Modeling of Distortions Resulting from a Welded T-joint) H. Champliaud
V. N. Lê
2007 T. Bellizzi Modélisation paramétrique du pressage d'aubes de turbines (Parametric Modeling of Pressing in Turbine Blades) H. Champliaud
T.-M. Dao
2007 J. Zeng Simulation dynamique du roulage de cônes (Dynamic Simulation of Cone Rolling) Z. Liu
H. Champliaud
2006 H. Nasri Conception d'un robot sauteur pour l'exploration au sol sur Mars (Design of a Hopping Robot for Ground Exploration on Mars) H. Champliaud
J. Lanteigne
2006 O. Morin Calcul des contraintes résiduelles dues au soudage par la méthode des éléments finis (Calculation of Residual Stress Resulting from Finite Element Method-Based Welding) H. Champliaud
V.N. Lê
2005 P. Terrier Influence de l'utilisation du biocarburant E85 sur les émissions polluantes d'un véhicule hybride électrique (Effects of Using E85 Biofuel on the Pollutant Emissions of a Hybrid Electric Vehicle) H. Champliaud
P. Seers
Reports
2013

Badri B. et Thomas M., 2012, "Rapport relatif à l’audit des procédés, pratiques et équipements en vibration de la Direction des Eaux Potables", Ville de Montréal, 62

2012

Badri B. et Thomas M., Avr 2012, Audit des procédés, pratiques et équipements en vibration de la direction des eaux potables, Ville de Montréal, 33 p

2010

Aubras F., Thomas M. and Guilbault R., (September 2010). Modeling of a Gear Box, ÉTS-ESTACA Report, 30 p.

Benevise E., Badri B., Thomas M. and Bolaers F., (August 2010). Using a Strainometer to Measure Impact Force Resulting from Bearing Faults. ÉTS-INSA Practicum Report, 42 pages.

Seye A. M., Badri B. and Thomas M., (August 2010). Cutting monitoring software correlated with Tool Kinematics, ÉTS-INPG practicum Report, 32 p.

Sif K., Badri B. and Thomas M. (July 2010), Bearing vibration behaviour simulation software, ÉTS-UTBM practicum Report, ST40, 2010, 58p.

Ibnorachid Z., Badri B., Zaghbani I. and Thomas M. (February 2010), Development of a Vibration Monitoring Software application for a High-Speed Milling Machine, correlated with Tool Kinematics, UTBM ST40-2009 Practicum Report, France, 52 pages.

2009   
Badri B. and Thomas M. (November 2009), Dynamic Analysis of CVT Transmission, ÉTS-RT-2008-J-2942 technical Report, 21 pages. (CVT Funding).

Esteve A., Badri B., Zaghbani I., Thomas M., Lakis A. and Mureithi N. (Mai 2009), UHV vibration problems, practicum Report:  ENSAM-ÉTS. 30 pages

2008   
Mabrouki F. and Thomas M. (December 2008), A study of vibration behaviour in the Jasmine base, ÉTS-RT-2008-J-2939 Technical Report, 20 pages. (MABE Funding).

Badri B., Thomas M., Lakis A. and Mureithi N., (June 2008), UHV vibrations, ÉTS, 16 pages.

Sghir K.A. and Thomas M., (June 2008), Signals of a High-Speed Milling Machine, ÉTS Report, 46 pages.

Palaisi D., Thomas M. and Guilbault R., (May 2008), Modeling gear assembly vibrations, ÉTS Report, 12 pages.

Hamelin P., Badri B. and Thomas M. (February 2008), Development of a system for monitoring the condition of rotary machines using advanced nondestructive testing techniques, UTBM ST40-P2008 Practicum Report, France, 57 pages.   

2007   
Thomas M., Bocher P., Champliaud H., Guilbault R. and Le V.N., (November 2007), Numerical simulation of welding residual stress. CRDPJ 268339-02 Report, GE Hydro, 20 pages (Funded by CRSNG-CRD).  

Badri B., and Thomas M. (August 2007), Experimental modal analysis of brush-cutter rotors, Phase 2, ÉTS Technical Report, 11 pages (Funded by Denis-Cimaf).

Mabrouki F. and Thomas M. (August 2007), A study of vibrations in a basic model dryer, ÉTS Technical Report, Phase 2, 14 pages (Funded by MABE).

Badri B., Ouahabi A. and Thomas M. (June 2007), Experimental modal analysis of brush-cutter rotors, ÉTS Technical Report, 10 pages (Funded by Denis-Cimaf).

Badri B., Thomas M. (2007), Bearing vibrations detection, DGA 1033 Report, ÉTS, 48 pages.

Palaisi D., Thomas M. and Guilbault R. (2007), Gear assembly vibration, MTR 871 Report, ÉTS, 22 pages.
 
Badri B., Thomas M. ( 2007), Bearing and gear assembly models, DGA 1032 Report, ÉTS, 56 pages.

Badri B. and Thomas M. (July 2006), Experimental modal analysis through Avestor battery impact, Phase 3, Avestor Inc, 18 pages. (Funded by Avestor).

Badri B. and Thomas M. (March 2006), Experimental modal analysis through Avestor battery impact, Phase 2, Avestor Inc., 17 pages (Funded by Avestor).

Badri B. and Thomas M. (February 2006), experimental modal analysis through Avestor battery impact, Phase 1, Avestor Inc, 20 pages (Funded by Avestor).

Merlet S., Thomas M., Lakis A. and Marcouiller L. (April 2006), Design of a test bench for hydraulic turbine models, ÉTS Technical Report, 41 pages. (Funded by NSERC-CRD)

Lê V.N ., Champliaud H. (2007). Stress Analysis of Richmond BC Finish Mill No. 2, ÉTS-CTS Lafarge Canada Inc., 5 p., May.

Lê V.N ., Champliaud H. (2007). Stress Analysis of Richmond BC Finish Mill No. 1, ÉTS-CTS Lafarge Canada Inc., 5 p., May.

Liu, Z. and Alix, P. (2007), “Simulation and modeling of the dynamics of a robotic arm based on the finite element method using ANSYS,” Phase II Technical Report for IREQ, April 2007, 87 pages. (Research contract)

Lê N.V. (2007). Finite Element Results in Welded Driving Tube for Ottavalo Mill, Lafarge CTS, Montreal, May, 2 pages.

Lê N.V. (2007). Stress Analysis of St-Constant Coal Mill Design, Lafarge CTS, Montreal, 2007.05.15, 5 pages.
    
2006   
Lê V.N., Champliaud H. (2006). Design and Stress Analysis of Porte-Montt Chile Mill, Lafarge CTS, 8 p., November.
 
Champliaud H., Terriault P. (2006). Comparison of Two Types of Spring Valve System Mounted on Accordion Bottles – Phase III. ÉTS-Axcan Pharma Report, 14 p., June.

Champliaud H., Lê N.V. (2006). Stress Analysis for a 29” by 57” Rectangular Injector Opening in Bath Plant Kiln no.1,  ÉTS-CTS Lafarge Canada Inc. Report, 27 p., March.

Liu, Z. and ELBENNA, S. (2006), “Simulation and Modeling of the Dynamics of a Robotic Arm Through the Finite Element Method Using ANSYS,” Phase I Technical Report for IREQ, October 2006, 65 pages. (Research contract)

Lê N.V. (2006). Finite Element Analysis Report for Ottavalo Mill, Lafarge CTS, Montreal, September, 11 pages.

Lê N.V. (2006). An Analysis of 36ºF-Manholes for Kiln No.2 in St Constant, ÉTSCTS-2006-04-07 Report, Lafarge Canada, April, 3+2 pages.
    
2005   
Castrataro A. and Thomas M.(February 2005), Technical Effects of Robot Welding on Hydraulic Turbine Residual Stress for the Grande Coulée Project, ÉTS-GE Hydro Technical Report, 27 pages. (Funded by GE Hydro).

Champliaud H. (2005). Stress Analysis for a 29” by 57” Rectangular Injector Opening in Bath Plant Kiln no.1,     ÉTS-CTS Lafarge Canada Inc. Report, 15 p., October.
 
Champliaud H. (2005). Finite Element Analysis of a Trio-Tech Extreme Theater Chair,  ÉTS-XPX-Tri o Tech Report., 17 p., July.  

Lê N.V., Champliaud H. (2005). Multilayer Coke Model for a Petroleum Riser Pipe Ratchet,  ÉTS-Petro Canada Report, 9 p., April.

Liu, Z. and Tahan, A. (2005), ‘Geometric Characterisation Algorithm for Wooden Boards, Technical Report for Ixode Technologie/Frigon Électrique, 2005, 77 pages. (Research contract)

Lê N.V. (2005), Addendum 1 to Comparative Fatigue Analysis of Shaft-Roller Designs for Bath Kiln Based on Shrink Fit Pressures: FLS Design with Sharp Contact Corners, Lafarge CTS, Montreal, 8p.

Lê N.V. (2005), Comparative Fatigue Analysis of Shaft-Roller Designs for Bath Kiln Based on Shrink Fit Pressures, ÉTS-CTS-2005-08-16 Report, Lafarge Canada, August, 4p.
 
Lê N.V. & Champliaud H. (2005), Non-Linear Coke Model for Petroleum Riser Pipe Ratchet, ÉTS-XPERX-PETRO-CA-2005-04-14 Report, April, 12p.
 
Lê N.V. (2005), Analyse des contraintes du four No. 2 à St Constant pour le remplacement des chaînes haute température par des croisillons (Stress Analysis of Kiln No.2 in St Constant to Replace High-Temperature Chains with Spiders) ÉTS-CTS-2005-03-21, Lafarge Canada, March, 7p.
 
Lê N.V. (2005), Stress Analysis for Replacement of Tire Shell Sections of Sugar Creek Kiln, Report ÉTS-CTS-2005-03-14, Lafarge Canada, March, 6p.
Books
Authors

Thomas, M., 2011. « Fiabilité, maintenance prédictive et vibrations de machines », Presses de l'Université du Québec, 633 pages. D3357, ISBN 978-2-7605-3357-8

Thomas, M., February 2003. « Fiabilité, maintenance prédictive et vibrations de machines » (Reliability, Predictive Maintenance and Machinery Vibration), Éditions ÉTS, 616 pages.

Vu V.H., Thomas M., Lakis A.A. and Marcouiller L., 2010. Vibration and Structural Acoustics Analysis, Current Resesearch and related technologies, Springer, Vasques C.M.A., Dias Rodrigues (Eds.), 1st edition, ISBN 978-94-007-1702-2, chap 3 (pp 59-78), 327 p.

Thomas, M and Laville, F., 2007, « Simulation des vibrations mécaniques par Matlab, Simulink et Ansys » ( ),  the École de technologie supérieure and les Presses de l'université du Québec, 702 pages. . Funding: Institutional support from ÉTS.





K. Melhem and Z. Liu, 2005, "A Unified Modeling and Stabilization Framework for Interconnected Rigid Bodies", Intelligent Systems at the Service of Mankind, Vol. 2, published by W. Elmenreich et al., ISBN 3866080522, pp. 141-160.


Publishers
    

Thomas, M. and Laville, F. (2008), Publishers: New International Journal on Industrial Risk Engineering (IRE), ÉTS, Montréal JIIRI
   
Thomas, M. and Laville, F. (2007), publishers. Proceedings of the 1st   International Conference on Industrial Risk Engineering, Montréal, ÉTS, 656 pages, ISBN 978-2-921145-65-7, December 2007.

M. Thomas, Z. Liu and E. Bouthillier, (Publishers), Proceedings of the 24th Seminar on Machinery Vibration, CMVA, 25-27 October, 2006, Montréal, Québec, Canada, ISBN 2-921145-61-8.

Thomas, M. and Seguin, K., October 2002. Publishers of the Proceedings of the 20th Seminar on Machinery Vibration, CMVA, Québec, 270 pages.
Patents
Voix, J. and Laville, F. (2005) “Method and apparatus for objective assessment of in-ear device acoustic performance,” United States Patent Application 20050123146.

Voix, J. and F. Laville (2004). “Method and apparatus for determining in situ the acoustic seal provided by an in-ear device”; United States Patent 6,687,377, Sonomax Hearing Healthcare Inc.

Lafleur, F. Thomas, M. and Laville, F. 2004, "Method for Determining a vibratory excitation spectrum tailored to physical Characteristics of a Structure." United States Patent 6,810,741, Centre de Recherche Industrielle du Quebec.

Lafleur, F. Laville F. Thomas, M.: 2004, "Modal analysis method and apparatus therefore," United States Patent 6,763,310, Centre de Recherche Industrielle du Québec.

Lafleur, F., Laville F., Thomas M. and Aubé J. 2003, "Vibration testing apparatus and method using acoustical waves". United States Patent 6,668,650, Centre de Recherche Industrielle du Québec. 

Lafleur, F., Thomas, M. and Laville, F. (18 May 2001). “Modal analysis method and apparatus therefor,” no ref 5120.98.1, Canadian patent, no 2, 348, 320.
 
Lafleur, F., Laville, F., Thomas, M. and Aubé, J. (28 June 2000). “Vibration testing apparatus and method using acoustic waves,” International patent no WO 01/01103A1, January 2001, European Patent Office, no 00943504.1-2213-CA0000784



Publications on machine dynamics - vibroacoustics
 
Journals
2014
M. Kedadouche, M. Thomas and A. Tahan, 21 april 2014. Monitoring bearing defects by using a method combining EMD, MED and TKEO. Advances in Acoustics and Vibration. Hindawi Publishing Corporation, Vol 2014, ID 502080,10 p

P. Belanger, April 2014. High order shear horizontal modes for minimum remnant thickness. ULtrasonics, Vol. 54, Issue 4, 1078-1087.
2008    

Lefebvre, L. and Laville, F. (2008). “Noise source identification for mechanical systems generating periodic impacts”, Applied Acoustics, v 69, No. 9, September 2008, pp. 812-823.

Bouzidane A. and Thomas M. (2008). An electrorheological hydrostatic journal bearing for controlling rotor vibration, Computers and Structures, Elsevier, 86(3-5), pp. 463-472.
 
Sassi S., Badri B. and Thomas M. (2008). Tracking surface degradation of ball bearings by means of new time domain scalar descriptors, Internat. journal of COMADEM, ISSN1363-7681, 11 (3), 36-45.

2007    
Sassi S., Badri B. and Thomas M. (2007). A Numerical Model to Predict Damaged Bearing Vibrations, Journal of Vibration and Control, Vol. 13, No. 11, Doi: 10.1177/1077546307080040, 1603-1628.

Bouzidane A. and Thomas M., 2007, Equivalent Stiffness and damping investigation of a hydrostatic journal bearing, Tribology transactions, 50 (2): 257-267.

2005    
Bouzidane, A. and Thomas, M. (July 2005). “An electrorheological hydrostatic journal bearing for controlling rotor vibration”, II Eccomas thematic conference on smart structures and materials, Edited by Carlos Soares, Instituto Superior Tecnico, Lisbon, 20 pages. (Financial support from NSERC)
Proceedings
2014

M. Kedadouche, M. Thomas and A. Tahan, 2014. Empirical Mode Decomposition of Acoustic Emission for Early Detection of Bearing Defects. Adv. Monitoring of Machinery in Non stationary Operations, 367-377

2012

M. Thomas
, A. Tahan and M. Kedadouche, "Comparison of acoustic emission and vibration measurements for early detection of bearing damages" Résumé, 3p.
Int. Symp. on research and innovation for transport systems of the future, France, Paris, 2012-11-15

2009


Palaisi D., Guilbault R., Thomas M., Lakis A. and Mureithi N. (October 2009), Simulations numériques du comportement vibratoire d'engrenages endommagés (Numerical Simulations of the Vibration Behaviour of Damages Gear Assemblies, Proceedings of the 27th Seminar on Machinery Vibration), Proceedings of the 27th Seminar on machinery vibration, Canadian Machinery Vibration Association CMVA 09, Vancouver, CB, 16 p. Full text

Ouahabi A., M. Thomas and A. A. Lakis, Mai 2009, Hybrid Monitoring of Crack Location in Riveted Plates by combining an Experimental Modal Analysis with Numerical Models, CIRI, Reims, paper CIRI008, 8 pages.

B. Badri; M. Thomas; S. Sassi; I. Zaghbani; V. Songméné; A.A. Lakis; N. Mureithi, October 2009, Instability of high speed machining due to correlation between bearing defect and rotor resonance frequencies, Proceedings of the 27th Seminar on machinery vibration, Canadian Machinery Vibration Association CMVA 09, Vancouver, CB, 14 p. Full text

Sghir K.A., El Badaoui, M. Thomas, M., I. Zaghbani, V. Songméné, A. Lakis, N. Mureithi, Mai 2009, Identification aveugle paramétrique basée sur la cyclostationnarité à l'ordre deux de la fonction de transfert à partir des mesures vibratoires (Blind Parametric Identification Based on Cyclostationarity at a Second-Order Transfer Function Using Vibration Measurements). CIRI, Reims, paper CIRI012, 16 pages. Full article

Sghir K.A., El Badaoui, M. Thomas, M., I. Zaghbani, V. Songméné, A. Lakis, N. Mureithi, (May 2009). Blind Parametric Identification Based on Cyclostationarity at a Second-Order Transfer Function Using Vibration Measurements. CIRI, Reims, paper CIRI012, 16 pages. Full Text
     
2008     
Guilbault R. and Thomas M., June 2008. Prediction of Resonances of Thin-Rimmed Cylindrical Gears from a Sub-Structuring Approach, Proceedings of the CSME, Forum 2008, Ottawa, No 1569100493, 8p.

2007     
Badri B., Thomas M., Archambault R., Sassi S., Lakis A. and Mureithi N., December 2007, A new method to detect synchronous and asynchronous shock data in a signal, Proc. of the 1st international conference on industrial risk engineering CIRI, Montreal, ISBN 978-2-921145-65-7, pp.625- 636.

Badri B., Thomas M., Archambault R., Sassi S., Lakis A. and Mureithi N., October 2007, The Shock Extractor, Proceedings of the 25th Seminar on machinery vibration, CMVA 07, Saint John, NB. Full text
 
2006     
Gagnon M., Tahan, S.-A., Coutu A. and Thomas M. 2006, Analyse modale opérationnelle en présence d'excitations harmoniques (Operational Modal Analysis in the Presence of Harmonic Excitation): A case study of hydroelectric turbine components. Proceedings of the 24th Seminar on machinery vibration, CMVA, ISBN 2-921145-61-8, Montreal, 320-329. Full text

Badri B., Archambault R, Thomas M. and Sassi S., 2006. Rapid Julien Transform: A New Method for Shock Detection and Time-Domain Classification (in French). Proceedings of the 24th Seminar on machinery vibration, Paper A20, CMVA, ISBN 2-921145-61-8, Montreal, pp. 448-459. Full text

Ouahabi A., Thomas M et Lakis A., 2006, Détection de fissures de respiration de fatigue par excitation harmonique et analyse temps-fréquence. Proceedings of the 24th Seminar on machinery vibration, CMVA, ISBN 2-921145-61-8, Montreal, pp. 460-472. Full text

2005     
Guerra, M., Thomas, M. and David, E. From October 3 to 6, 2005. "Turbomachinery Blade Vibratory Stress Prediction using Contact Elements Modeling,", NATO Research and Technology Organisation, Air Vehicle Technology (AVT-121) Symposium on the Evaluation, Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles, Seville, Spain, 10 pages. (Financial support from Pratt & Whitney)
Dissertations and theses
Year Author Title Supervisor/Co-supervisor
2010 C. Le Cocq Communication dans le bruit : perception de sa propre voix et rehaussement de la parole (Communication in a noisy environment: Perception of One’s own Voice and Speech Enhancement) F. Laville
C. Gargour
2010 J.-P. Arz Développement d'une méthode de réduction du bruit d'impact des structures par ajout d'une couche mince d'élastomère (Developing a Method for Reducing Structural Impact Noise by Adding a Thin Layer of Elastomer) F. Laville
2006  J. Voix Mise au point d'un bouchons d'oreille "intelligent" (Development of an Intelligent Ear Plug) F. Laville
Reports
2010
Arz, Jean-Pierre, (2010). “Development of a Method for Reducing Structural Impact Noise by Adding a Thin Layer of Elastomer”

2008   
Liu, Z. and Rafieian, F., (2008). ‘Vibration Study of SCOMPI Robotic System in Grinding Operation’, Report submitted to Hydro-Quebec's Research Institute, 2008, 45 pages.

Clément, Pascal, (2008). “Partial Discharge Detection in 0020 Transformers Using Electrical and Acoustic Methods”
 
2006   
Lefebvre, Louis, (2006). “Identification and Characterisation of Impulse, Repetitive and Synchronised Noise Sources in a Complex Mechanical System”
 
Séris, Julie, (2006). “A Study of some Voice Activity Detection Methods in Noisy Industrial Environments”, Laville, Frédéric NIP: 135478 9
   
2005   
Belleil, Cédric, (2005). “Direct Calculation of Aerodynamic and Acoustic Performances of an Industrial Silencer through CFD Modeling and Aerodynamic Optimisation”

2005 Langlois, Daniel, (2005). “A Study of the Structural Damping Phenomenon in Assemblies for Reducing Acoustic Dispersion”



Publications - structural dynamics
 
Journals
2014

Saboori M., Champliaud H., Gholipour J., Gakwaya A., Savoie J., Wanjara P. (March 2014) Evaluating the flow stress of aerospace alloys for tube hydroforming process by free expansion testing, Int. J. of Adv. Manufacturing Technology

V. H. Vu, M. Thomas and F. Lafleur, January 2014, Harmonic and Modal Frequency Discrimination in Time Domain Operational Modal Analysis, Mechanics & Industry, Vol 15 (01), Cambridge University Press 29-37.

2012

Saboori M., Champliaud H., Gholipour J., Gakwaya A., Savoie J. and Wanjara P., 2012. Study of True Stress-Strain Curve after Necking for Application in Ductile Fracture Criteria in Tube Hydroforming of Aerospace Material, ESAFORM 2012, March 14-16, 2012, Nuremberg, Germany, pp. 95-100, accepted in key Engineering Materials.

Thibault D., Bocher P., Thomas M., Lanteigne J., Hovington P. and Robichaud P., 2012, Reformed austenite transformation during fatigue crack propagation of 13%Cr-4%Ni stainless steel, Materials Science and Engineering A, Elsevier DOI10.1016/j.2011.04.089, 30 p.


2011


Lajmi, H. Champliaud & V.N. Lê, " Computation of the Maximum Torque of a Cap Liner Using a Power-Law Friction and Finite Element Analysis ", Packaging Technology and Science (2011), Vol.24, pp. 103-121

Ayari H., Thomas M. and Doré S., 2011, A design of experiments for statistically predicting a risk of adverse health effect of drivers exposed to vertical vibrations, International Journal of Occupational Safety and Ergonomics (JOSE), Vol. 17, No. 3, 217-229 (financement IRSST-CRSNG).

2010

Sun Y., Thomas M. and Masounave J., 2010. A quasi-Bingham model for predicting electrorheological fluid behaviour, Multidiscipline modeling in Materials and Structures. Vol. 6, No 1, Emerald group publishing limited, 141-165

2009

Feng Z., Champliaud H., Dao T.-M. (2009). Numerical Study of Non-Kinematical Conical Bending with Cylindrical Rolls, Journal of Simulation Modelling Practice and Theory, 17(10), 1710-1722.

Esmailzadeh M., Lakis, A.A., Thomas, M. and Marcouiller, L. 2009. Prediction of the response of a thin structure subjected to a turbulent boundary layer induced random pressure field, Journal of Sound and Vibration, 328, issues 1-2. 109-128 (NSERC-CRD Funding)

Sun Y., Thomas M. and Masounave J., 2009. An experimental investigation of the dielectric properties of electrorheological fluids, Journ. of Smart Materials and Structures, IOP, 18, 024004, 9 p.

Mabrouki F.., Thomas M., Genest M., Fahr A., 2009. Frictional Heating Model for Efficient Use of Vibrothermography," NDT & E International. ISSN 0963-8695, Elsevier, doi:10.1016/j.ndteint.2009.01.012, 42 (5), 345-352. (NRC Funding)

2008
Ayari H, Thomas M. and Doré S., 2008, Development of an Injury Risk Factor for Drivers, Revue Internationale sur l'Ingénierie des risques Industriels (JI-IRI), Vol. 1, No 2, pp. 120-138. JIIRI
 
Kerboua, Y., Lakis, A., Thomas, M. & Marcouiller, L. 2008. Computational modeling of coupled fluid-structure systems with applications, Structural Engineering and Mechanics, 29 (1), 91-111.
 
Esmailzadeh K. M., Lakis, A., Thomas, M. and Marcouiller, L. 2008. Three-dimensional modeling of curved structures submerged in fluid, Finite Elements in Analysis and Design, 44 (6-7), pp. 334-345.

2007
Duchaine F., Champliaud H. (2007). Structured Mesh Generation by Kriging with Local Refinement with a New Elliptic Scheme, Engineering with Computers, vol. 23, no 1, pp. 61-69.

Ouahabi A., Thomas M., Kobayashi M. and Jen C.-K, 2007, Structural Health Monitoring of Aerospace Structures with Sol-Gel Spray Sensors, Key Engineering Materials, vol. 347, pp. 505-510. on line at http://www.scientific.net, Trans Tech Publications, Switzerland.

2006
1 Kerboua Y., Lakis A., Thomas M., Marcouiller L., Toorani M.H, 2006, Dynamic Analysis of Coupled-fluid Structure Systems, WSEAS Transactions on Applied and Theoretical Mechanics, Issue 2, Volume 1, ISSN 1991-8747, pp. 265-274.

2005
1 Melhem K., Z. Liu and A. Loria, 2005, "A Unified Framework for Dynamics and Lyapunov Stability of Holonomically Constrained Rigid Bodies", Int. Journal of Advanced Computational Intelligence and Intelligent Informatics, 9(4), 387-394.

Sassi, S., Cherif, K., Mezghani, L., Thomas, M. and Kotrane, A., 2005. "An innovative magnetorheological damper for automotive suspension: from design to experimental characterization", Smart Materials and Structures, Institute of physics publishing, 14, pp. 811-822. (Financial support from NSERC)
Proceedings

2013

Z. Feng, H. Champliaud, L. Mathieu, M. Sabourin and V. N. Lê, 2013, “Investigation of Pressing Process for Large and Thick Blades of Francis Turbines”, CFM-2013 Congrès Français de Mécanique, 26-30 août 2013, Talence-Bordeaux, France
2013

2012

Champliaud H., V. N. Lê, "Beginning Learning Principles of Finite Element Method with Heat Conduction", 5th World Universities Forum, 8-10 Jan 2012, Rhodes, Grèce.

Najjari M., Guilbault R., 2012.Edge Correction in the Elastohydrodynamic Lubrication of Finite Line Contact. Proceedings of the International Conference on Mechanical Engineering and Mechatronics Ottawa, Ontario, Canada, 15-17 Aug.

Lê V. N. , H. Champliaud, "A Teaching Approach for Enhancing Structural Design Aspects in Basic Engineering Courses", 5th World Universities Forum, 8-10 Jan 2012, Rhodes, Grèce.

2011

V. N. Lê, H. Champliaud, "Finite Element Analysis of Spring Back Strain Energy of Metal Sheet Coils", NAFEMS World Congress, 23-26 Mai 2011, Boston, États-Unis.

Saboori M., Gholipour J., Champliaud H., Gakwaya A., Savoie J., Wanjara P. (2011). Prediction of Burst Pressure Using a Decoupled Ductile Fracture Criterion for Tube Hydroforming of Aerospace Alloys, ESAFORM 2011, Belfast, Ireland, April 27-29.

2010


Guilbault, R., 2010, “A Fast Correction for Traction-Free Surface of Elastic Quarter-Space,” Third International Conference on Tribology and Design, M. Hadfield, J. Seabra and C.A. Brebia, eds., WIT Press, Southampton, UK, pp. 37-48.

2009
Champliaud H., Feng, Z., Bersee H. (2009), Three-Point Bending Testing of Sandwich Beams and Finite Element Comparison, 2009 ASME Int. Mech. Eng. Conf., Lake Buena Vista, Florida, USA, November 13-19.

Ayari H., Thomas M., Doré S., Taiar R. and Dron J.P., May 2009. Predicting the adverse health effects to long term whole-body vibration exposure, CIRI, paper CIRI002, Reims, 19 pages.

2007
Duchaine F., Bersee H.E.N., Champliaud H. (2007). The Influence of the Thickness on 3D Elastic Material Properties of Unidirectional E-glass/epoxy Laminated Composites, Cancom 2007, Winnipeg, Canada, August 14-17.

Feng Z., Champliaud H., Zeng J., Dao T.-M. (2007). Investigation of Influence of Sliding of Rolls Over Plate on Continuous Bending with Noncompatible Conical Rolls, The 18th IASTED International Conference on Modelling and Simulation, MS 2007, Montreal, Canada, May 30 to June 1.

Feng Z., Champliaud H., Dao T.-M. (2007). Modeling and Simulation of Conical Bending with Cylindrical Rolls, 2007 ASME Pressure Vessels and Piping Division Conference, San Antonio, Texas, U.S.A., July 22-26.

Charette O., Champliaud H., Thomas M. (2007). FEM Calculation of Frequencies Variation Caused by Residual Stress Distribution in Welded Structures, The 18th IASTED International Conference on Modelling and Simulation, MS 2007, Montreal, Canada, May 30 to June 1.

Feng Z., Champliaud H., Zeng J., Dao T.-M. (2007). Investigation of Influence of Sliding of Rolls Over Plate on Continuous Bending with Noncompatible Conical Rolls, The 18th IASTED.

Ayari H., Thomas M. and Doré S., December 2007. Development of an injury risk factor for drivers Proc. 1st int. Conf. on Industrial Risk Engineering CIRI, Montreal, ISBN 978-2-921145-65-7, 137-150.

Ayari H., Thomas M. and Doré S., October 2007. A design of experiment for studying the effect of human body parameters on an injury risk of drivers exposed to vibration, Proc. of the 37th International conf. on Computers and Industrial Engineering, CIE 07, Alexandria, Egypt, pp. 620-628.

Sun Y., Thomas M., and Masounave J., July 2007, Experimental investigation on Electrorheological fluid rheology and dielectric properties, Int. Conf. on Smart Materials and Nanotechnology in Engineering (SMN2007), Vol. 6423-34, Shanyi Du, Jinsong Leng and Anand K. Asundi editors Harbin China, 8p.

2006
Duchaine F., Baten E.M., Champliaud H., Bersee H.E.N. (2006). Comparison of Beam Theories with FEA in Three-Point Bending of Thick Composites, 8th International Conference on Computational Structures Technology, Las Palmas de Gran Canaria, Spain, September 12-15.

Rhéaume F.-É., Champliaud H., Liu Z. (2006). Simulating Strain Wave Gearing Torsional Stiffness using the Finite Element Method, 2006 Ansys Conference and Exhibition, Pittsburgh, USA, May 2-4.

2005
Thomas M., Champliaud H. (2005). Effect of Residual Stresses on Modal Parameters of Welded Structures, 23rd CMVA Seminar, Canadian Machinery Vibration Ass., Edmonton, Alberta, October 26-28. Full text.

Champliaud H., Bouzid A. (2005). Computation of Unloading Stiffness of Nonlinear Gaskets Using Dual Kriging Interpolation, 7th MESO 2005 Int. Conf. on Mesomechanics, Montreal, Canada, August 1-4.

Dissertations and theses
Theses
Year Author Title Supervisor/Co-supervisor
2010 V-H. Vu Vu    Analyse modale opérationnelle des structures non stationnaires (Operational Modal Analysis of Nonstationary Structures) M. Thomas
2009 Y. Sun Développement de fluides électrorhéologiques et applications en contrôle semi-actif des vibrations (Development of Electrorheological Fluids and Semi-active Vibration Control Applications) M. Thomas
J. Masounave
2009 H. Ayari Effet d'une exposition prolongée aux vibrations sur les vertèbres lombaires des chauffeurs (Effects of Prolonged Exposure to Vibration on the Lumbar Vertebrae of Drivers) M. Thomas
S. Doré

Dissertations
Year Author Title Supervisor/Co-supervisor
2008 M. Gagnon Contribution à l'identification des paramètres modaux sur des structures immergées (Contribution to the Identification of Modal Parameters of Submerged Structures) S-A. Tahan
M. Thomas
2007 A. Kotrane Conception, réalisation et caractériation dynamique d'un amortisseur magnéto rhéologique (Design, Implementation and Dynamic Characterisation of a Magnetorheological Damper) V.N. Lê
Reports
2012

V. N. Lê., Procédure d’ouverture et de propagation de fissure dans les modèles d’éléments finis 3D, Rio-Tinto Alcan, Rapport technique ETS-Rio Tinto 2011-11-07, Nov 2011, 8 pages.

V. N. Lê.,
Procédure d’initiation et de propagation de fissure dans les modèles d’éléments finis 2D, Rio-Tinto Alcan, Rapport technique ETS-Rio Tinto 2011-09-01, Sept 2011, 10 pages.

2007

Ruban T., Vu Viet H., Thomas M., Lakis A. and Marcouiller L., (February 2007). Design of fluid-structure interaction test benches, ÉTS Technical report, 49 pages (Funded by NSERC-CRD).

Volta T., Vu Viet H., Thomas M., Lakis A. and Marcouiller L., (February 2007). Design of fluid-structure interaction test benches, ÉTS Technical report, 56 pages (Funded by NSERC-CRD).

2006
Masson, P., Micheau, P., Pasco, Y., Thomas, M., Brailovski, V., Meunier, M., Peter, Y.-A., Mateescu, D., Misra, A., (September 2006). “Microsystems for in-situ monitoring of aeronautic structures”, Phase II Report, CRIAQ project 6.1 ,13 pages, (Funded by CRIAQ-VRQ)

Esmailzadeh M., Lakis A., Thomas M. and Marcouiller L., (June 2006). Three-dimensional modeling of curved structure partially or completely containing and/or submerged in fluid, EPM-RT-2006-06 Report, École Polytechnique, Montréal, 39 pages, (Financial support from NSERC-CRD).

Kerboua Y, Lakis, A.A., Thomas M. and Marcouiller L., (March 2006). Dynamic analysis of  plates interacting with a fluid and applications, EPM-RT-2006-01 Report, École Polytechnique, Montréal, 4 pages (Financial support from NSERC-CRD).

Masson, P., Micheau, P., Pasco, Y., Thomas, M., Brailovski, V., Meunier, M., Peter, Y.-A., Mateescu, D., Misra, A., (February 2006). “Microsystems for in-situ monitoring of aeronautic structures”, Phase I Report, CRIAQ project 6.1, 162 pages (Funded by CRIAQ-VRQ)

Badri B., Ouahabi A. et Thomas M., (October 2006). Analysis of operational deflected shapes at the Chateaufort pumping station, City of Montreal, 26 pages (Funded by City of Montreal).

2005
Kerboua Y, Lakis, A.A., Thomas M. and Marcouiller L., (August 2005). Dynamic behaviour of submerged rectangular plates, EPM-RT-2005-05 Report, École Polytechnique, Montréal, 82 pages (Financial support from NSERC-CRD).



Publications - process dynamics
 
Journals

2014

Tran Q.H., Champliaud H., Feng Z., Dao T.M. (2014). Analysis of the Asymmetrical Roll Bending Process through Dynamic FE Simulations and Experimental Study , The International Journal of Advanced Manufacturing Technology, vol. 75, pp. 1233-1244.

2013

Tran Q.H., Champliaud H., Feng Z., Salem J., Dao T.M. (2013). Heat Assisted Roll Bending Process Dynamic Simulation, International Journal of Modelling and Simulation, vol. 1, p. 54-62 (CRSNG).

Feng Z., Champliaud H. (2012). Investigation of non-Ninematic Conical Roll Bending Process with Conical Rolls, Simulation Modelling Practice and Theory, vol. 27, p. 65-75 (CRSNG)

Tahvilian, M., Liu, Z., Champliaud, H., Hazel, B., 2013, “Experimental and FE analysis of Temperature and Energy Partition to the Workpiece During Grinding Process with Flexible Robot”, Journal of Material Processing Technology, 213(12), 2292-2303.

2012

Rafieian, F., Girardin, F., Liu, Z., Thomas, M., Hazel, B., 2013, “Angular analysis of the cyclic oscillations in a robotic grinding process”, Mechanical Systems and Signal Processing (accepted).

2011

Feng Z., Champliaud H. (2011). Modeling and Simulation of Asymmetrical Three-Roll Bending Process. Journal of Simulation Modelling Practice and Theory,Vol. 19(9), page 1913-1917.

Feng Z., Champliaud H. (2011). Three-Stage Process for Improving Roll Bending. Journal of Simulation Modelling Practice and Theory, Vol. 19(2), page 887-898.

Tran, Q.H., Champliaud, H., Feng, Z. and Dao, T.M. (2011). FE Simulation of Heat Assisted Roll Bending Process for Manufacturing Large and Thick High Strength Steel Axisymmetric Parts. Proceedings of the IASTED International Conference on Modelling, Simulation and Identification, MSI 2011, page 322-329.

2010


Feng Z., Champliaud H. (2010). Three-Stage Process for Improving Roll Bending Quality, Simulation Modelling Practice and Theory, published online.

Thibault, D., Bocher, P., Thomas, M., Gharghouri, M. and Côté, M., 2010. Residual stress characterization in low transformation temperature 13%Cr-4%Ni stainless steel weld by neutron diffraction and the contour method. Materials Science and Engineering A volume 527, issue 23, DOI: 10.1016/j.msea.2010.06.035, pp. 6205-6210 (Funded by IREQ).

Q-H. Bui and X-T. Pham. 2010. "Modelling of microstructure effects on the mechanical behaviour of ultrafine-grained nickels processed by hot isostatic pressing", submitted to International Journal of Mechanical Sciences.

2009

Humbert M., Moreau A., Uta E., Gey N., Bocher P., Bescond C. (2009) "Analysis of backscattered ultrasound amplitude of Ti–5.8Al–4Sn–3.5Zr–0.7Nb–0.5Mo–0.3Si samples in terms of their microstructures and local textures" Acta Materialia 57, pp. 708-714

Toubal L., Bocher p., Moreau A. (2009) "Dwell-fatigue life dispersion of a near alpha titanium alloy", International Journal of Fatigue 31, pp. 601-605.

Thibault, D., Bocher P., Thomas M. (2009) "Residual Stress and Microstructure in Welds of 13Cr-4Ni Martensitic Stainless Steel", Journal of Materials Processing Technology, 209, pp. 2195-2202 [IREQ].

2008

Boutana N., Bocher P., Jahazi M., Piot D., Montheillet F. (2008) "The microstructural modelling of room temperature creep in titanium alloys using a cellular automata model" International Journal of Microstructure and Materials Properties - Vol. 3, No. 4/5, pp. 642-653 [NSERC].

Germain L., N. Gey, M. Humbert, P. Vo, M. Jahazi, P. Bocher (2008) "Texture heterogeneities induced by subtransus processing of near a titanium alloys", Acta Materialia, Volume 56, Issue 16, pp. 4298-4308.

Zeng J., Liu Z., Champliaud H. (2008). FEM Dynamic Simulation and Analysis of the Roll-Bending Process for a Conical Tube, Journal of Materials Processing Technology, 198(1-3), pp. 330-343.

L. Lacasse, A. Tahan and Z. Liu, 2008, "Robust Algorithms for Automatic Characterization and Detection of Wood Board Surface Defects", Quality Engineering, 20(2), 221-231, 2008.

2007

Arafin M. A., Medraj M., Turner D. P., Bocher P. (2007) "Random Walk Modeling of Isothermal Solidification during TLP Bonding of SS 410 and 321 with BNi-2", Journal of Defect and Diffusion Forum (Accepted) [CRIAQ + P&WC].

Arafin M. A., Medraj M., Turner D. P., Bocher P. (2007), "Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer", Materials Chemistry and Physics, Vol. 106, Issue 1, 15, pp. 109-119 [CRIAQ + P&WC].

Arafin M. A., Medraj M., Turner D. P., Bocher P. (2007) "Transient Liquid Phase Bonding of Nickel Superalloys with BNi-2: Modeling and Experimental Investigations", Journal of Materials Science and Engineering A, Vol. 447, Issues 1-2, 25, pp. 125-133 [CRIAQ + P&WC].

Barka N., Bocher P., Brousseau J., Galopin M., Sundararajan S. (2007), "Modeling and Sensitivity Study of the Induction Hardening Process", Advanced Materials Research, Vol. 15-17, pp. 525-530 [NSERC + P&WC].

Arafin M. A., Medraj M., Turner D. P., Bocher P. (2007) "Mathematical modeling and experimental investigations of isothermal solidification during transient liquid phase bonding of nickel superalloys", Journal of Advanced Materials Research, Vol. 15-17, pp. 882-887. [CRIAQ + P&WC].

Z. Liu and G. Payre, 2007, "Stability Analysis of Doubly Regenerative Cylindrical Grinding Process", Journal of Sound and Vibration, 301(3-5), 2007, 950-962.

J.-H. Zhao, Z. Liu and T.-M. Dao, 2007, "Reliability Optimization Using Multiobjective Ant Colony System Approaches", Journal of Reliability Engineering and System Safety, 92(1), 109-120.

2006

Vo P., Jahazi M., Yue S., Bocher P. (2006) "Flow stress prediction during hot working of near-alpha titanium alloys", Materials Science and Engineering: A, Vol. 447, Issues 1-2, pp. 99-110 [NSERC].

Dao T.M., Makrem C., Abou Seraphi C. (2006). "A Hybrid Hopfield Neural Networks Based Simulation Approach for Optimisation of Manufacturing Group Scheduling", Journal of the Chinese Institute of Industrial Engineer – JCIIE (in press).

Zhao J.H., Liu Z., Dao T.M. (2006). "Reliability Optimization using Multiobjective Ant Colony System Approaches", Reliability Engineering & System Safety, Science Direct, Vol. 92, pp. 109-120.

2005

Khodabandeh A. R., Jahazi M., Yue S., Bocher P., (2005) "Impact Toughness and Tensile properties Improvement through Microstructure Control in Hot Forged Nb-V microalloyed Steel", ISIJ Int., Vol. 45 No. 2, pp. 272-280 [NSERC].

Germain L., Gey N., Humbert M., Bocher P., Jahazi M. (2005) "Analysis of sharp microtexture heterogeneities in bimodal IMI 834 billets" Acta Mat., Vol. 53, Issue 13, pp. 3535-3543.

X-T. Pham, P. Bates and A. Chesney. 2005. "Modeling of thermoforming of low density glass mat thermoplastic", Journal of Reinforced Plastics and Composites, 24(3), pp. 287-298.

Proceedings

2013

Z. Feng, H. Champliaud, L. Mathieu, M. Sabourin, V. N. Lê, “Investigation of Pressing Process for Large and Thick Blades of Francis Turbines”, CFM-2013 Congrès Français de Mécanique, 26-30 août 2013, Talence-Bordeaux, France

(Accepted) Tran H. Q., Champliaud H., Feng Z., Dao T.-M. (2013). Dynamic FE Analysis for Reducing the Flat Areas of Formed Shapes Obtained by Roll Bending Process, IMECE 2013, San Diego, USA, November 15-21 (CRSNG).

(Accepted) Feng Z., Champliaud H. (2013). Using Pyramidal Three-roll Bending Process to Improve the Quality of Seemed Cylinders, IMECE 2013, San Diego, USA, November 15-21 (CRSNG).
(Accepted) Saboori M., Champliaud H., Gholipour J., Gakwaya A., Savoie J., Wanjara P. (2013). Development of an Inverse Method for Material Characterization, Materials Science & Technology 2013, Montreal, Canada, October 27-31 (CRIAQ-CRSNG).

(Accepted) Feng Z., Champliaud, H. (2013). Modeling and Simulation of Hot Radial-Axial Ring Rolling Process for Producing Power Plant Parts, Materials Science & Technology 2013, Montreal, Canada, October 27-31 (CRSNG).

(Accepted) Kassab R., Champliaud H., Bocher P., Lanteigne J., Lê N. V. (2013). Strain Variations of AISI 4340 Steel Undergoing Metallurgical Transformations During Induction Hardening Heat Treatment, Materials Science & Technology 2013, Montreal, Canada, October 27-31.

(Accepted) Sarafan S., Champliaud H., Wanjara P., Mathieu L., Lanteigne J. (2013). Characteristics of Electron Beam Welded CA6NM, Materials Science & Technology 2013, Montreal, Canada, October 27-31 (CRSNG).

(Accepted) Gendron M., Boudreault E., Hazel B., Champliaud H., Tan P. (2013. Temperature Profile Optimization in a New Robotic Local Induction Heat Treatment Process, Materials Science & Technology 2013, Montreal, Canada, October 27-31 (CRSNG).

Feng Z., Champliaud H., Mathieu L., Sabourin M., Lê N.V. (2013). Investigation of Pressing Process For Large and Thick Blades of Francis Turbines, CFM 2013, Bordeaux, France, August 26-30 (CRSNG).

Lê N.V., Champliaud H. (2013). Facteur de sécurité des structures de poutres colonnes basé sur l’analyse du flambage linéaire par éléments finis, CFM 2013, Bordeaux, France, August 26-30.

Feng Z., Champliaud, H. (2013). Modeling and Simulation of Optimal Blank Design and Hot Pressing Process for Manufacturing Large Francis Turbines Blades from very Thick Plates, 2013 ASME Pressure Vessels and Piping Conference, Paris, France, July 14-18 (CRSNG).

Feng Z., Champliaud, H. (2013. Modelling and Simulation of Radial Ring Rolling Process based on Finite Element Analyses, 2013 ASME Pressure Vessels and Piping Conference, Paris, France, July 14-18 (CRSNG).

Saboori M., Gholipour J., Champliaud, H., Gakwaya A., Savoie J., Wanjara P. (2013). Effect of Material Model on Finite Element Modeling of Aerospace Alloys, ESAFORM 2013, Aveiro, Portugal, April 22-24, publié dans Key Engineering Materials, vols 554-557, p. 1779-1786 (CRIAQ-CRSNG).

Mojarad Farimani S., Champliaud, H., Gholipour J., Savoie J., Wanjara P. (2013). Numerical and Experimental Study of Tube Hydroforming for Aerospace Applications, ESAFORM 2013, Aveiro, Portugal, April 22-24, publié dans Key Engineering Materials, vols. 554-557, p. 151-156 (CRIAQ-CRSNG).

Feng Z., Champliaud H. (2013). FEM Analysis of Mecano-Welding Process for Manufacturing Cylinders, SheMet 2013, Belfaste, Royaume-Uni, March 25-27, publié dans Key Engineering Materials vol. 549 (2013), p. 444-451 (CRSNG).

2012

Feng Z., Champliaud H. (2012). Numerical Simulation of Mecano-welding Process for Cylinder Manufacturing. Proceedings of the 2012 ASME Pressure Vessels and Piping Conference, July 15-19, 2012, Toronto, Canada.

Feng Z., Champliaud H., Sabourin M., Morin S. (2012). Simulation of Blank Design for Blades of Francis Turbines, IMECE2012, Houston, Texas, USA, November 9-15 (CRSNG).

Tran Q.H., Champliaud H., Feng Z., Dao T.-M. (2012). Dynamic Analysis of the Roll Bending Process with FEM Simulation, The 24th European Modeling & Simulation Symposium (Simulation in Industry), Vienna, Austria, September 19-21 (CRSNG).

Feng Z., Champliaud, H., Sabourin M., Morin S. (2012). Modeling and Simulation Based on Inverse Finite Element Method for Unfolding Large and Thick Blades of Francis Turbines, The 24th European Modeling & Simulation Symposium (Simulation in Industry), Vienna, Austria, September 19-21 (CRSNG).

Feng Z., Champliaud, H. (2012). Modeling and Simulation of Mecano-Welding Process for Cylinders, ASME 2012 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Chicago, IL, USA, August 12-15 (CRSNG).

Tran Q.H., Champliaud H., Feng Z., Dao T.M. (2012). Analytical Modeling and FE Simulation for Analyzing Applied Forces During Roll Bending Process, ASME 2012 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Chicago, IL, USA, August 12-15 (CRSNG).

Tahvilian A.M., Champliaud H., Liu Z., Hazel B (2012). Study of Workpiece Temperature Distribution in the Contact Zone during Robotic Grinding Process using Finite Element Analysis, CIRP ICME '12, Gulf of Naples, Italy, July 18-20 (CRSNG).

Feng Z., Champliaud H. (2012). Numerical Simulation of Mecano-welding Process for Cylinder Manufacturing. Proceedings of the 2012 ASME Pressure Vessels and Piping Conference, Toronto, Canada, July 15-19 (CRSNG).

Lê V.N., Champliaud H. (2012). Finite Element Simulations for Comparing Three Manhole Designs for Horizontal Mills, IASTED2012, The 23rd IASTED International Conference on Modelling and Simulation, MS 2012, Banff, Canada, July 3-5 .

2011


Feng Z., Champliaud H. (2011). Modeling and Simulation of Mecano-Welding Process For Tubular Sections, Proceedings of 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, United States.

Tran H.Q., Champliaud H., Feng Z. and Dao T.M.(2011). Heating Approach for The Roll Bending Process to Produce Large and Thick High Strength Steel Axisymmetric Parts, The IASTED International Conference on Modelling, Simulation, and Identification , MSI 2011, November 7 – 9, 2011, Pittsburgh, USA.

2010

Feng Z., Champliaud H. (2010). Comparison between Numerical Simulation and Experimentation of Asymmetrical Three-Roll Bending Process, ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, Canada, November 12-18.

Feng Z., Champliaud H. (2010). Analyses of Non-kinematic Conical Roll Bending Process with Conical Rolls, ASME 2010 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Montreal, Canada, August 15-18.

Hulskamp A.W., Champliaud H., van Wingerden J-W., Barlas T., Bersee H.E.N., van Kuik G.A.M., Verhaegen M. (2010). Smart dynamic rotor control: Part 1, Design of a smart rotor, Torque 2010 The Science of making Torque from Wind June 28-30, 2010, FORTH, Heraklion, Crete, Greece.

2009

Toubal L., Bocher P., Moreau A. "Dwell-fatigue life of a near-alpha titanium alloy and ultrasonic measurement correlation" ICF12 Ottawa 2009 [NSERC].

Bocher P., Bridier F., Toubal L., Boutana N., Uta E., Gey N., Humbert M., "Dwell-fatigue in near alpha titanium alloys: a multiscale, interdisciplinary challenge" ICF12 Ottawa 2009 [NSERC].

Feng Z., Champliaud H., Dao T.-M. (2009), Three-Dimensional Finite Element Analyses for Pyramidal Three-Roll Bending Process, 2009 ASME Int. Mech. Eng. Conf., Lake Buena Vista, Florida, USA, November 13-19.

Feng Z., Champliaud H., Lê V.N., Dao T.M. (2009), Analyses of Roll Bending Processes Based on Finite Element Simulations, NAFEMS World Congress 2009, Crete, Greece, June 16-19.

S. Hallé, J. Kouam, V. Songmene, F. Morency, M. Viens, Y. Cloutier, J. Masounave, R. Khettabi and A. Djebara, “Process for Measuring and Controlling Manufactured Nanoparticles ", Conférences scientifiques sur la sécurité des travailleurs et le contrôle des risques industriels, Montréal QC, September 17, 2009.

R. Khettabi, A. Djebara, V. Songmene, M. Viens, S. Hallé, F. Morency, Y. Cloutier et J. Kouam, “Procedure for Measuring and Controlling Manufactured Nanoparticles”, INNO•09 Symposium, IRSST-NanoQuébec, Montréal QC, April 23-24, 2009

X-T. Pham, (2009). “Simulation-based optimization for the boundary of the melting pool in MIG welding process”, 9th International Seminar on Numerical Analysis of Weldability, Seggau, Austria, September 2009.

2008

Monajati H., Jahazi M., Bocher P., Yue S., (2008) “Dynamic Recrystallization Investigation during Hot Deformation of Udimet 720 Nickel Base Superalloy”, 14th International Metallurgy and Materials Congress on 16-18 October 2008, Istanbul, Turkey:

Uta E., Bocher P., Gey N., Humbert M., Gilgert J., (2008). “EBSD Analyses of Dwell Fracture Surface in Titanium Alloy IMI 834”, JIP 2008, Fatigue and Plasticity: from mechanisms to design, May 20 to 22, 2008, Paris France.

Moreau A., Kruger S. E., Côté M. Bocher, P. (2008) "In-Situ Monitoring of Microstructure during Thermomechanical Simulations using Laser-Ultrasonics", 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications, July 16-18 2008, Montreal, Canada [GeHydro + IREQ].

Thibault, D., Bocher P., Thomas M., Gharghouri M.A. (2008) "Neutral diffraction measurements of residual stresses in 13%Cr-4% Ni weld", NRC Canadian Neuron Beam Center Annual Report 06-07, vol. 06-07, pp. 58-59 [IREQ].

A. Szymanski, J. Masounave, M. Viens, J. Litwin, "Émission de poussière par frottement" (Dust Emission Caused by Friction), USIFORME 2007 Symposium, Montréal QC, March 3-5 2008.

Feng Z., Champliaud H., Dao T.-M. (2008). Simulation Analyses of a Non-kinematical Conical Roll Bending Process with Conical Rolls, 20th European Modeling and Simulation Symposium, September 17-19, Briatico, Italy.

Feng Z., Champliaud H., Dao T.-M. (2008). Simulation of a Three-Stage Process for Forming a Closed Cone from a Plate, 2008 ASME Pressure Vessels & Piping Conference, July 27-31, Chicago, Illinois, USA.

Nguyen H.N., Lê N.V., Champliaud H., Martin F. (2008). Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements, Fourth International Conference on High Performance Structures and Materials, HPSM2008, May 13-15, The Algarve, Portugal.

X-T. Pham, P. Gougeon and F-O. Gagnon. 2008. "Welding simulation of cast aluminium A356", International Conference on Trends in Welding Research, Pine Mountain, June 2008.

2007

Boutana N., Bocher P., Jahazi M., Piot D. and Montheillet F. (2007) "Simulation of the mechanical behavior of heterogeneous materials using cellular automata", First International Conference on Sustainable Manufacturing, Montreal, October 2007, Canada [NSERC].

Barka N., Khelalfa A. J., Bocher P., Brousseau J., Sundararajan S. (2007) "Analysis of the effect of frequency using numerical modeling of induction hardening process", First International Conference on Sustainable Manufacturing, Montreal, October 2007, Canada [NSERC].

Thibault-Liboiron K., Alderliesten R., Benedictus R., Bocher P. (2007) "Off-axis crack propagation and delamination growth in FMLs", 6th Canadian-International Composites Conference 2007, Winnipeg, August 2007, [NSERC].

Germain, L., Vo P., Gey N., Jahazi M., Humbert M., Bocher P. (2007) "Development of sharp local a microtextures during a/ß thermo-mechanical processing of TIMETAL 834" Titanium 2007, June 2007, Kyoto, Japan.

Boutana N., Bocher P., Jahazi M., Piot D., Montheillet F. (2007) "Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method" Titanium 2007, June 2007, Kyoto, Japan [NSERC].

Uta E., Humbert M., Gey N., Hazotte A., Bocher P., Jahazi M. (2007) "Description and characterization of texture heterogeneities in titanium alloy TIMETAL 834 with a bimodal microstructure" Titanium 2007, June 2007, Kyoto, Japan.

Feng Z., Champliaud H., Dao T.-M. (2007). Modelling and Simulation of Conical Bending Process with Sliding Rolls, IFAC Workshop on Manufacturing Modelling, Management and Control, Budapest, Hungary, November 14-16.

Nasri H., Lanteigne J., Champliaud H. (2007). Usage of the Contour Method in Measuring Residual Stress in Welding and Peen-Welding Applications, The IASTED Asian Conference on Modelling and Simulation, Asia MS 2007, Beijing, China, October 8-10.

Zhao J.-H., Champliaud H., Dao T.-M. (2007). Simulation of Shear Spinning Process for Pressure Vessel Components, 2007 ASME Pressure Vessels and Piping Division Conference, San Antonio, Texas, U.S.A., July 22-26.

Zhao J.-H., Champliaud H., Dao T.-M. (2007). Simulation of Shear Spinning Process using Finite Element Method, The 18th IASTED International Conference on Modelling and Simulation, MS 2007, Montreal, Canada, May 30 to June 1.

Bellizzi T., Boisvert J., Champliaud H., Dao T.-M. (2007). Estimation of the Pressing Force in Blade Forming Application, The 18th IASTED International Conference on Modelling and Simulation, MS 2007, Montreal, Canada, May 30 to June 1.

Dao T.M., Ateme-Nguema B. (2007). Optimal Selection of Manufacturing Routing of Parts: A Case Study, International Conference on Industry, Engineering, and Management Systems, Cocoa Beach, Florida, March 12-14.

Hacini L., V. N. Lê., Bocher P., (2007). “Impact-Based Surface Treatment: Assessment of Haamering-induced Residual Stress”, 18th French Congress on Mechanics, August 2007, Grenoble, France [NSERC + IREQ].

Amri B., Lê V.N., Champiaud H. (2007). A Hysteresis Approach of Thermal Expansion Effect on Residual Stresses due to Welding, The 18th IASTED International Conference on Modelling and Simulation, MS 2007, Montreal, Canada, May 30 to June 1.

Lacasse, S.-A. Antoine, Z. Liu, “Automatic Characterization of Wood Board Surface Defects”, Fifth International Conference on Industrial Automation, Montreal, Quebec, Canada, 11-13 June 2007.

A. Szymanski, J. Masounave, M. Viens, “Various Sources of Fine and Ultra-fine Particle Emissions into the Air”, CIRI 2007, Montréal Qc, 17-19 December 2007 Full article

2006

Boutana N., Bocher P., Jahazi M., Piot D., Montheillet F., (2006). “Use of Cellular Automation to Study the Behaviour of Creep/Fatigue in Titanium Alloys”, Materials 2006, November 2006, Dijon, France, CDR [NSERC].

Dubourg L., Jahazi M., Dezaise G., Bocher P. (2006) "Microstructure and mechanical characterisation of FSW 7075-T6 Lap Joints" COM2006 Montreal, October 1-4, 2006, pp. 107-120.

Hacini L., Le N. V., Bocher P. Thibault D. (2006) "Effect of energy level on stresses induced by robotized hammer peening" COM2006 Montreal, October 1-4, 2006, pp. 759-768 [NSERC + IREQ].

Barka N., Bocher P., Galopin M., Brousseau J., Sundararajan S. (2006) "Sensitivity Study of Induction Hardening Machine Parameters of SAE-4340 Steel Specimen" COM2006 Montreal, October 1-4, 2006 pp. 781-790 [NSERC + P&WC].

Barka N., Bocher P., Brousseau J., Galopin M. and Sundararajan S. "Modeling and Sensitivity Study of the Induction Hardening Process" (2006) Thermec 2006, June 2006, Vancouver Montreal, Canada, [NSERC + P&WC].

Dao T.M, Abou Seraphin C., Makrem C. (2006). A Hybrid Hopfield Neural Networks Based Simulation Approach for Optimisation of Manufacturing Group Scheduling. 36th ICCIE, Taipei, Taïwan, June 20-23.

Z. Liu, G. Payre, "Chatter Onset Prediction of Doubly Regenerative Cylindrical Grinding Process", Proc. of the Second Int. Conf. on Dynamics, Vibration and Control, August 23-26, 2006, Beijing, China.

2005

Wanjara P., Monajati H., Jahazi M., Germain L., Bocher P. "Deformation Processing and Microstructural Evolution in a Near-Alpha Titanium Alloy" (2005) - Materials Science & Technology 2005 - Edit. Ellen Cerreta, Vasisht Venkatesh, F. Dax, Jaimie Tiley.

Zhao J.H., Dao T.M., Liu Z. (2005). Optimization of Mechanical Systems Reliability Using Ant Colony based Simulation Approach, Proceedings of the 16th IASTED International Conference on Modeling and Simulation, Cancun, Mexico, May 18-20, pp. 182-187.

J.-H. Zhao, Z. Liu and T.-M. Dao, "Solving Reliability Optimal Design Problem using Ant Colony System (ACS) Approaches", Proc. Of the 15th Int. CIRP Design Seminar 2005, Shanghai, China, May 22-26 2005, pp. 32-40.

M. Viens, Z. Wang, "HBAR-spectroscopy used for materials characterization", Proc. Review of Progress in Quantitative NDE conf., Brunswick Me, July 31 - August 5, 2005, vol. 25B, pp. 1171-1178

Dissertations and theses
Theses
Year Author Title Supervisor/Co-supervisor
2010 D. Thibault Contribution à l'étude du comportement en fatigue des aciers inoxydables 13%CR-4%NI : contraintes résiduelles de soudage et transformation sous contrainte de l'austénité de réversion (Contribution to the Study of Fatigue Behaviour in 13 Cr: 4 Ni Stainless Steel: Welding Residual Stress and Stress-based Transformation of Reversion Austenite)  
2009 H. Ayari Effet d'une exposition prolongée aux vibrations sur les vertèbres lombaires des chauffeurs (Effects of Prolonged Exposure to Vibration on the Lumbar Vertebrae of Drivers) T.-M. Dao

Dissertations
Year Author Title Supervisor/Co-supervisor
2008 B. Amri Effet d'hystérésis de la dilatation thermique sur les contraintes résiduelles dues au soudage (The Hysteresis Effect of Thermal expansion on Welding Residual Stresses) V.N. Lê
H. Champliaud 
2008 B. Sylvestre Conception d'un panneau solaire de type «membrane» attaché à un micro ou nano satellite (Design of a Membrane-type Solar Panel Attached to a Microphone or a Nanosatellite) H. Champliaud
M.-J. Potvin
2007 R. Kassab Modélisation par la méthode des éléments finis des distorsions dues au soudage d'un joint en T (Finite Element Modeling of Distortions Resulting from a Welded T-joint) H. Champliaud
V.N. Lê
2007 F-É. Rhéaume Simulation du comportement en torsion d'un démultiplicateur harmonique par la méthode des éléments finis (Simulation of the Torsional Behaviour of a Harmonic Reduction Gear through the Finite Element Method) H. Champliaud
V.N. Lê
2006 A.-M. Carita Modèle d'aide à la décision pour le choix optimal de procédé mécanosoudé pour la fabrication de la couronne d'une roue Francis (Decision Support Model for Choosing the best Mechanically-Welded Procedure for Manufacture of the Rim of a Francis Wheel) T-M. Dao
2006 O. Morin Calcul des contraintes résiduelles dues au soudage par la méthode des éléments finis (Calculation of Residual Stress Resulting from Finite Element Method-Based Welding) H. Champliaud
V.N. Lê
2006 M. Mechti Reconfiguration des lois de commande en présence de défauts critiques » par Mokhtar Mechti (Reconfiguration of Control Laws in the Presence of Critical Defects, by Mokhtar Mechti) S-C. Abou
T.-M. Dao


Publications - structural dynamics - vibroacoustics
 
Journals

2014

Boyer, S., Doutres, O., Sgard, F, Laville, F., Boutin, J. «Objective assessment of the sound paths through earmuff components»  Applied Acoustics, Volume 83, 2014, Pages 76–85

Brummund, M., Sgard, F., Petit, Y. et Laville, F., « A three-dimensional finite element model of the human external ear for simulation of the occlusion effect », J. Acoust. Soc. Am. 135, 1433, 2014

2013

Viallet, G., Sgard, F., et Laville, F., "Axisymmetric versus three-dimensional finite element models for predicting the attenuation of earplugs in rigid walled ear canals", J. Acoust. Soc. Am.134 (6), December 2013, Pages: 4470-4480

2010


Le Cocq, C., Laville, F. and Gargour, C., (2010). “Subjective Quantification of Earplug Occlusion Effect Using External Acoustical Excitation of the Mouth Cavity”, submitted to the Journal of the Acoustical Society of America. Funded by NSERC’s CRD project in partnership with SONOMAX.

2009
Le Cocq, C., Gargour, C. and Laville, F., 2009. "A wavelet speech thresholding rule for denoising in industrial environments," submitted to the EURASIP Journal on Advances in Signal Processing. Funding: NSERC’s CRD project in partnership with SONOMAX.

Arz, J.P. and Laville, F., 2009. "Experimental Characterization of Small Thickness Elastomeric Layers Submitted to Impact Loading" Journal of Sound and Vibration v 326, no. 1-2, September 2009, pp. 302-313. Funding: NSERC.

Voix, J. and Laville, F., 2009. "Prediction of the Attenuation of a Filtered Custom Earplug" Applied Acoustics, vol. 70, no. 7, July 2009, pp. 935-944. Funding: IRSST grant and NSERC’s CRD project in partnership with SONOMAX.

Voix, J. and Laville, F., (2009). “The Objective Measurement of Individual Earplug Field Performance”, Journal of the Acoustical Society of America, Vol. 125, No. 6, June 2009, pp. 3722-3732. Funding: IRSST grant and NSERC’s CRD project in partnership with SONOMAX.

Ayari H, Thomas M., Doré S. and Serrus O., 2009. Evaluation of lumbar vertebra injury risk to the seated human body when exposed to vertical vibration, Journal of Sound and Vibration, 321, Issues 1- 2 doi:10.1016/j.jsv.2008.09.046, pp. 454-470. (IRSST Funding).

Mabrouki F., Thomas M., Genest M., Fahr A. 2009, Frictional Heating Model for Efficient Use of Vibrothermography" NDT & E International. ISSN 0963-8695, Elsevier, doi:10.1016/j.ndtei nt.2009.01.012, 42 (5), 345-352.

2008
Gaudreau, M.A., Laville, F., Nélisse, H. and Voix, J., (2008). “Field-MIRE Approach for Measuring Hearing Protector Attenuation during a Shift”, Canadian Acoustics - Acoustique Canadienne, Vol. 36, No. 2, June, 2008, pp. 3-10. Funded by: IRSST.

Gaudreau, M.A., Laville, F., Voix J. and Nélisse H, (2008). “State of the Art and Outlook on the Measurement of Effective Performances of Hearing Protection Devices in Work Settings”, International Journal on Industrial Risk Engineering, Vol. 1, No. 1. Funded by: IRSST.

Kerboua Y., Lakis A., Thomas M. and Marcouiller L., 2008, Vibration analysis of rectangular plates coupled with fluid. Applied mathematical modeling, 32 (12), pp. 2570-2586.

2007
Kerboua Y., Lakis A., Thomas M. and Marcouiller L, 2007, Hybrid method for vibration analysis of rectangular plates, Nuclear Engineering and Design Journal, V237 (8), pp. 791-801.

2005
Voix, J. and Laville, F., (2005). “Problems Related to the Development of an Intelligent Earplug”, PISTES, Vol. 2 No. 7. Funding: IRSST grant and NSERC’s CRD project in partnership with SONOMAX.

Proceedings

2009
Vu V.H., M. Thomas, A.A. Lakis and L. Marcouiller, October 2009, Software for operational modal analysis and automatic identification of modal parameters, Proceedings of the 27th Seminar on machinery vibration, Canadian Machinery Vibration Association CMVA 09, Vancouver, CB, 16 p. Full text

Vu V.H., M. Thomas, A.A. Lakis and L. Marcouiller, July 2009 Operational modal analysis by short time autoregressive (STAR), 3rd international conference on IRF, Porto, 16 p.

Vu V.H., M. Thomas, A.A. Lakis and L. Marcouiller, Mai 2009. Online monitoring of varying modal parameters by operating modal analysis and model updating. CIRI, Reims, paper CIRI006, 18 p.

Mabrouki F., Thomas M., Genest M., Fahr A. 2009, Frictional Heating Model for Efficient Use of Vibrothermography" NDT & E International.doi:10.1016/j.ndtei nt.2009.01.012, 8p.

2007
Vu V.H, Thomas M., Lakis A. and Marcouiller L. December 2007, a time domain method for modal identification of vibratory signal, Proceedings of the 1st international conference on industrial risk engineering CIRI, Montreal, ISBN 978-2-921145-65-7, pp. 202-218.

Vu V.H, Thomas M., Lakis A. and Marcouiller L. October 2007, Multi-regressive model for structural output only modal analysis, Proceedings of the 25th Seminar on machinery vibration, Canadian Machinery Vibration Association CMVA 07, Saint John, NB, pp. 41.1-41.20.  Full text

Vu V.H, Thomas M., Lakis A. and Marcouiller L. October 2007, Effect of added mass on submerged vibrated plates, Proceedings of the 25th Seminar on machinery vibration, Canadian Machinery Vibration Association CMVA 07, Saint John, NB, pp. 40.1-40.15. Full text

Charette O., Champliaud H. and Thomas M., 2007, FEM calculation of frequencies variation caused by residual stress distribution in welded structures, Int. Conf. on modelling and simulation. International Association of Science and Technology for Development (IASTED) 2007, pp. 446-451, Montreal, QC, Canada. 446-451.

Vu V. H., Thomas M., Lakis A. and Marcouiller L., May 2007, Identification of modal parameters by experimental operational analysis for the assessment of bridge rehabilitation. Proc. of the 2nd international operational modal analysis conference (IOMAC), Copenhagen, Denmark, 1, pp. 133-142.

Vu V.H., Thomas M. and Lakis A., (April 2007). Is the Bridge Safe? Response of an Operational Modal Analysis Technique, 42nd AQTR Conference, The Sustainable Transport Challenge, 17 p.

2006
Vu Viet H., Thomas M et Lakis A., 2006, Operational modal analysis in time domain, Proceedings of the 24th  Seminar on machinery vibration, CMVA, ISBN 2-921145-61-8, Montreal, pp. 330-343. Full text

Ouahabi A., Thomas M. and Lakis A., 2006. Detection of damages in beams and composite plates by harmonic excitation and time-frequency analysis, Proceedings of the third European workshop on structural health monitoring, Granada, Spain, ed. Alfredo Guemes, universitad politecnica de Madrid, Destech publications Inc., USA, ISBN 1-932078-63-0, pp. 775-782.

Sun Y, Thomas M. and Masounave J., 2006, Damping of rotor torsional vibrations with electrorheological fluids, Proceedings of the 24th Seminar on machinery vibration (in French), Canadian Machinery Vibration Association, ISBN 2-921145-61-8, Montreal, pp. 344-369. Full text

Kotrane A., Thomas M. and Sassi S, 2006, Design of a magnetorheological suspension, Proceedings of the 24th Seminar on machinery vibration, CMVA, ISBN 2-921145-61-8, Montreal, pp. 473-491. Full text

2005
Thomas, M., Abassi, K., Lakis, A.A. and Marcouiller, L., October 2005. "Operational modal analysis of a structure subjected to a turbulent flow", Proceedings of the 23rd Seminar on machinery vibration, Canadian Machinery Vibration Association, Edmonton, AB, 10 pages. Full article

Thomas, M. and Champliaud, H., October 2005. "Effect of residual stresses on modal parameters of welded structures", Proceedings of the 23rd Seminar on machinery vibration, Canadian Machinery Vibration Association, Edmonton, AB, 10 pages. (Financial support from NSERC-RDC) Full text

Abassi, K., Thomas, M., Lakis, A.A. and Marcouiller, L., April 2005. “Experimental Analysis of a Structure Vibrating in Water”, CMVA conference, IREQ, Varennes. (Financial support from IRSST) Full article